{"title":"Heat Pump Water Heaters | Montreal, Laval, Longueuil, South Shore and North Shore","description":null,"products":[{"product_id":"chauffe-eau-thermodynamique-bradford-white-re2h50s10-1nctt-50-gallons-montreal-laval-longueuil-rive-sud-rive-nord","title":"BRADFORD WHITE RE2H50S10-1NCTT Heat Pump Water Heater (50 gallons) | Montreal, Laval, Longueuil, South Shore \u0026 North Shore","description":"\u003ch2\u003eA 50 US gallon heat pump water heater that draws its heat from the basement air\u003c\/h2\u003e\n\u003cp\u003eIn most homes across Greater Montreal, hot water comes from an electric tank in the basement that heats water with resistance elements alone. The \u003cstrong\u003eBradford White RE2H50S10-1NCTT heat pump water heater\u003c\/strong\u003e, part of the AeroTherm range, keeps that familiar format, but it produces most of its heat with a \u003cstrong\u003ebuilt-in heat pump\u003c\/strong\u003e mounted on top of the tank. The electric elements stay in place to take over when needed. At AirGreen, we install it in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, most often to replace an electric tank that has reached the end of its life.\u003c\/p\u003e\n\u003cp\u003eThis model is for homeowners who want to cut the share of hot water in their electricity use without changing their habits: the same morning shower, the same evening dishwasher load, with an appliance that works differently. It suits a detached house, a semi-detached or a condo that has a mechanical room. For a family of four, for example, a tank this size is the format already found in many basements, which keeps the replacement simple.\u003c\/p\u003e\n\u003ch3\u003eThe principle: moving heat instead of producing it\u003c\/h3\u003e\n\u003cp\u003eA heating element turns electricity into heat, nothing more. A \u003cstrong\u003eheat pump\u003c\/strong\u003e moves heat that already exists. A fan draws room air across an evaporator, the refrigerant picks up the heat, the compressor concentrates it, and that heat then passes into the water in the tank. It is the same cycle as a wall-mounted heat pump or an air conditioner, applied to domestic water.\u003c\/p\u003e\n\u003cp\u003eA direct result: the air leaving the unit is cooler and drier than the air it takes in. In summer, this slightly cools and dries the basement, something many homeowners appreciate in a damp basement. In winter, in a heated room, part of the captured heat comes from the house heating system. We factor that into our recommendations instead of promising you a catalogue result.\u003c\/p\u003e\n\u003ch3\u003eFive modes to match the household\u003c\/h3\u003e\n\u003cp\u003eThe control panel offers five modes, which we set with you on commissioning day:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHeat pump mode (only)\u003c\/strong\u003e: the compressor alone heats the water. It is the most frugal mode, suited to steady demand.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard hybrid mode\u003c\/strong\u003e: the heat pump does most of the work and the elements step in as needed. It is also the reference mode for the recovery data published by the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHybrid plus mode\u003c\/strong\u003e: it gives the elements a bigger role for periods when demand climbs, for example when visiting relatives mean more showers.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectric mode (only)\u003c\/strong\u003e: the unit runs like a conventional electric tank, useful as a backup or in a room that has become too cold.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVacation mode\u003c\/strong\u003e: it limits operation during an extended absence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eManufacturer data for the RE2H50S10-1NCTT\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e: 50 US gallons (42 imperial gallons, 189 L).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUniform Energy Factor (UEF)\u003c\/strong\u003e: 3.44, based on the AHRI directory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor only\u003c\/strong\u003e: 6 US gallons per hour (5 imperial gallons) at a 90 °F rise, or 23 L\/h at a 50 °C rise.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor and element\u003c\/strong\u003e: 24 US gallons per hour (20 imperial gallons), or 91 L\/h.\u003c\/li\u003e\n\u003cli\u003ePublished conditions for these values: standard hybrid mode, ambient air at 19.7 °C (67.5 °F) and 50 % relative humidity.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e: 240 V\/208 V single-phase, elements wired interlocking (non-simultaneous operation).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUpper element\u003c\/strong\u003e: 4,000 W at 240 V (3,000 W at 208 V), screw-in type.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTank\u003c\/strong\u003e: Vitraglas lining with Microban and a protective anode rod.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater connections\u003c\/strong\u003e: 3\/4 in. (19 mm) NPT, factory-installed dielectric fittings.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrain valve\u003c\/strong\u003e: brass, low restriction.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 59 3\/16 in. (1,503 mm) high and 21 3\/4 in. (552 mm) in diameter; weight 195 lb (88 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat a 3.44 UEF means\u003c\/h3\u003e\n\u003cp\u003eThe Uniform Energy Factor compares the energy delivered as hot water with the energy the unit consumes, in a standardized test. At 3.44, the RE2H50S10-1NCTT delivers, under those test conditions, more than three times the electrical energy it uses. A tank with elements alone cannot, by principle, deliver more energy than it receives. In your home, the real result will depend on the room temperature, the mode selected and your habits: that is exactly what we look at with you during the visit.\u003c\/p\u003e\n\u003ch3\u003eWhere it goes in a Quebec home\u003c\/h3\u003e\n\u003cp\u003eThe RE2H50S10-1NCTT goes where the tank usually sits: a \u003cstrong\u003ebasement\u003c\/strong\u003e, a mechanical room or a laundry room. Because it draws its heat from the surrounding air, the location must meet the requirements of Bradford White’s installation manual, which we review point by point during the visit, before confirming the project.\u003c\/p\u003e\n\u003cp\u003eHeight matters too. At 59 3\/16 in. tall, the unit fits under most basement ceilings, but the access needed to service the heat pump must also be planned. We measure the clear height, the stairs and the door frames before confirming the project: the water heater weighs 195 lb empty and its 21 3\/4 in. diameter has to clear every passage to its final location.\u003c\/p\u003e\n\u003cp\u003eFinally, room temperature affects performance. A finished, temperate basement offers good conditions all year. In a room that gets quite cold in winter, the elements take on a larger share of the work, and electric mode remains available to keep hot water flowing at all times.\u003c\/p\u003e\n\u003ch3\u003eA replacement with familiar connections\u003c\/h3\u003e\n\u003cp\u003eThis water heater connects like a conventional tank: cold water inlet and hot water outlet in 3\/4 in. NPT, with dielectric fittings already installed at the factory to limit corrosion between dissimilar metals. The temperature and pressure relief valve is connected to a discharge pipe that complies with the Quebec Construction Code. The low-restriction brass drain valve makes maintenance flushing quicker.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, the unit runs on 240 V\/208 V single-phase, like most residential tanks. Its two elements are wired interlocking: they never heat at the same time. In many homes, the existing circuit is adequate. We check it during the assessment and we make the electrical connections under our RBQ licence.\u003c\/p\u003e\n\u003ch3\u003eA protected tank built to last\u003c\/h3\u003e\n\u003cp\u003eThe inside of the tank is protected by Vitraglas vitreous enamel with Microban, an antimicrobial technology, and by a protective anode rod that wears instead of the steel. The backup electric elements are screw-in, so they can be replaced without removing the unit. According to Bradford White’s documentation, the model is \u003cstrong\u003eENERGY STAR\u003c\/strong\u003e certified, UL listed, meets NAECA requirements and is C.E.C. listed.\u003c\/p\u003e\n\u003ch3\u003eA 10-year warranty on the tank and parts\u003c\/h3\u003e\n\u003cp\u003eThe \"10\" suffix in the model number designates the extended-warranty version: Bradford White gives the RE2H50S10-1NCTT a 10-year limited warranty on the tank and 10 years on parts. For an appliance that combines a tank, a compressor and control electronics, that parts coverage carries real weight. We hand you the manufacturer’s documentation with your invoice so you have it on hand.\u003c\/p\u003e\n\u003ch2\u003eInstallation of the Bradford White RE2H50S10-1NCTT by AirGreen across Greater Montreal\u003c\/h2\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal and active for more than fifteen years in heating, ventilation and air conditioning, holding RBQ licence 5645-9605-01 (ventilation, refrigeration and electrical). A heat pump water heater calls on the same know-how as the heat pumps we install every day: refrigerant, compressor, airflow and electrical work. Our installation includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea free on-site assessment of the location against the manufacturer’s installation manual: room temperature, clear height, access and the path to the basement;\u003c\/li\u003e\n\u003cli\u003ea check of the existing electrical circuit and the required electrical connections;\u003c\/li\u003e\n\u003cli\u003edraining, disconnecting and removing the old tank;\u003c\/li\u003e\n\u003cli\u003econnecting the cold and hot water in 3\/4 in., and the relief valve with its discharge;\u003c\/li\u003e\n\u003cli\u003ecommissioning, choosing the mode and setting the temperature with you;\u003c\/li\u003e\n\u003cli\u003eclear maintenance advice: keep the air inlet and outlet unobstructed, flush the tank periodically, have the anode checked and test the relief valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnergy efficiency assistance programs change over the year. When we prepare your quote, we check which ones actually apply to your address and your project.\u003c\/p\u003e\n\u003ch3\u003eService area\u003c\/h3\u003e\n\u003cp\u003eWe install this water heater in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, Brossard, Boucherville, Terrebonne, Repentigny and throughout the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest your free on-site estimate for the Bradford White RE2H50S10-1NCTT.\u003c\/strong\u003e You then receive a detailed written quote, and \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options are available to spread out your project.\u003c\/p\u003e","brand":"Bradford White","offers":[{"title":"Default Title","offer_id":67801412206884,"sku":"RE2H50S10-1NCTT","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CHAUFFE_EAU_THERMODYNAMIQUE_BRADFORD_WHITE_AEROTHERM_RE2H_RE2H50S10_1NCTT_50_GAL_US_00_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082279"},{"product_id":"chauffe-eau-thermodynamique-bradford-white-re2h65t10-1nctt-65-gallons-montreal-laval-longueuil-rive-sud-rive-nord","title":"BRADFORD WHITE RE2H65T10-1NCTT Heat Pump Water Heater (65 gallons) | Montreal, Laval, Longueuil, South Shore \u0026 North Shore","description":"\u003ch2\u003eA 65 US gallon heat pump water heater that draws its heat from basement air\u003c\/h2\u003e\n\u003cp\u003eIn many Greater Montreal homes, hot water still comes from a conventional electric tank that heats water with resistance elements alone. The \u003cstrong\u003eBradford White RE2H65T10-1NCTT heat pump water heater\u003c\/strong\u003e keeps the familiar shape of an upright tank, but hands most of the work to an \u003cstrong\u003eintegrated heat pump\u003c\/strong\u003e mounted on top of the unit. It holds \u003cstrong\u003e65 US gallons (54 imperial gallons, 246 L)\u003c\/strong\u003e and is aimed at homeowners who want to replace an ageing electric tank with a far more efficient unit without changing any of their habits. AirGreen installs it in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis size suits a single-family house where, for example, a family of three or four lives, with a main bathroom and a powder room. Its reserve gives the heat pump time to work between the morning and evening peaks, and that is exactly what allows a unit of this type to run on its compressor most of the time rather than on its elements.\u003c\/p\u003e\n\u003ch3\u003eHow the heat pump heats the water\u003c\/h3\u003e\n\u003cp\u003eA heat pump water heater applies the principle of an ordinary \u003cstrong\u003eheat pump\u003c\/strong\u003e to the tank. A fan moves room air across an evaporator, where the refrigerant picks up the heat contained in that air. The compressor then concentrates this heat and transfers it to the water in the tank. The air leaving the unit is therefore cooler and drier than when it went in. Because a good share of the energy comes from the surrounding air rather than from the meter, the unit delivers more heat to the water than it consumes in electricity.\u003c\/p\u003e\n\u003cp\u003eTwo \u003cstrong\u003ebackup electric elements\u003c\/strong\u003e, screw-in type, complete the heat pump. They take over when demand exceeds what the compressor can supply, or when you select a mode that calls on them. The factory wiring is interlocked: the two elements never heat at the same time (non-simultaneous, single-phase operation).\u003c\/p\u003e\n\u003ch3\u003eManufacturer data for the RE2H65T10-1NCTT\u003c\/h3\u003e\n\u003cp\u003eThe following values come from Bradford White's technical documentation for this model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 65 US gallons, or 54 imperial gallons or 246 L.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUniform Energy Factor (UEF): 3.64\u003c\/strong\u003e, based on the AHRI directory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor only:\u003c\/strong\u003e 6 US gal\/h (5 imperial gal\/h) at a 90 °F rise, or 23 L\/h at a 50 °C rise.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor and element:\u003c\/strong\u003e 24 US gal\/h (20 imperial gal\/h), or 91 L\/h.\u003c\/li\u003e\n\u003cli\u003eTest conditions for these figures: standard hybrid mode, ambient air at 19.7 °C (67.5 °F) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBackup elements:\u003c\/strong\u003e 4,000 W at 240 V; at 208 V, the upper element is 3,000 W.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater connections:\u003c\/strong\u003e 3\/4 in. (19 mm) NPT, dielectric fittings installed at the factory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e height of 63 3\/4 in. (1,619 mm), diameter of 25 in. (635 mm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 236 lb (107 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFive modes to follow the season and the demand\u003c\/h3\u003e\n\u003cp\u003eThe control panel offers five operating modes. \u003cstrong\u003eHeat pump mode\u003c\/strong\u003e uses the compressor only: it is the most frugal setting, well suited when demand is steady. \u003cstrong\u003eStandard hybrid mode\u003c\/strong\u003e gives priority to the heat pump and calls on the elements only when needed; it is also the mode in which Bradford White establishes its recovery data. \u003cstrong\u003eHybrid plus mode\u003c\/strong\u003e relies more on the elements to rebuild the reserve faster, for example when the house has guests for a few days. \u003cstrong\u003eElectric mode\u003c\/strong\u003e runs on the elements only, which serves as a backup solution. Finally, \u003cstrong\u003evacation mode\u003c\/strong\u003e reduces the unit's activity during an extended absence.\u003c\/p\u003e\n\u003ch3\u003eWhere to put a heat pump water heater in a Quebec home\u003c\/h3\u003e\n\u003cp\u003eBecause it draws its heat from the air, this unit needs enough air volume around it. In Quebec, the basement, the mechanical room or a large laundry room are the most common locations. The manufacturer's location requirements, namely the room volume, the clearances around the unit and the drainage of condensate water, are checked during our visit, before the project is confirmed. At 63 3\/4 in. tall and 236 lb, the path down the stairs and the space under the joists are also part of the assessment.\u003c\/p\u003e\n\u003cp\u003eThe air discharged by the unit is cooler and drier. In summer, it cools and dries the basement, an effect many homeowners in the region appreciate. In winter, if the room is heated, part of the captured heat comes from the home's heating system. We take this into account in our recommendations rather than relying on the published energy factor alone.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right capacity\u003c\/h3\u003e\n\u003cp\u003eA heat pump heats water more slowly than an electric element: with the compressor alone, recovery is 6 US gallons per hour. That is why tank size matters more than with a conventional water heater. The 65 US gallon reserve of this model covers a typical day for a mid-sized family, after which the heat pump quietly rebuilds it during off-peak hours. If several showers follow one another without a break, or if the house has a large soaker tub, we also compare it with the larger-capacity version of the same line before making a recommendation.\u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp\u003eThe tank is protected by Bradford White's \u003cstrong\u003eVitraglas with Microban\u003c\/strong\u003e lining and by a \u003cstrong\u003eprotective anode rod\u003c\/strong\u003e, which wears over time in place of the steel. The 3\/4 in. NPT water connections receive dielectric fittings at the factory, which limits corrosion between dissimilar metals. The \u003cstrong\u003elow-restriction brass drain valve\u003c\/strong\u003e makes maintenance flushing easier, and the backup elements can be replaced without touching the tank since they are screw-in.\u003c\/p\u003e\n\u003cp\u003eAccording to the manufacturer's documentation, the model is \u003cstrong\u003eENERGY STAR\u003c\/strong\u003e certified, UL listed, C.E.C. listed and meets NAECA requirements.\u003c\/p\u003e\n\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\n\u003cp\u003eThe unit is factory-wired for a 240 V\/208 V single-phase supply, with interlocked elements. At 240 V, each backup element is 4,000 W. The existing tank circuit can often be reused, but we always check it: the breaker and conductor sizes are confirmed during the assessment, based on the unit's nameplate and the Code. Electrical connections are made under our RBQ licence 5645-9605-01, which covers ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003ch3\u003eManufacturer's warranty\u003c\/h3\u003e\n\u003cp\u003eThis model carries the \"10\" suffix: Bradford White covers it with a 10-year limited warranty on the tank and 10 years on parts. The full warranty terms are provided with your quote.\u003c\/p\u003e\n\u003ch2\u003eInstallation of the Bradford White RE2H65T10-1NCTT by AirGreen in Greater Montreal\u003c\/h2\u003e\n\u003cp\u003eAirGreen is a family-owned heating and cooling company established in Montreal and active for more than fifteen years. Every project begins with a \u003cstrong\u003efree on-site estimate\u003c\/strong\u003e, followed by a \u003cstrong\u003ewritten quote\u003c\/strong\u003e. For this heat pump water heater, our work includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eassessing the location: air volume, clearances, headroom, access and a drain for condensate;\u003c\/li\u003e\n\u003cli\u003echecking the electrical circuit and upgrading it if needed;\u003c\/li\u003e\n\u003cli\u003edraining, disconnecting and removing the old tank;\u003c\/li\u003e\n\u003cli\u003econnecting the cold and hot water lines in 3\/4 in., with the relief valve and its discharge line;\u003c\/li\u003e\n\u003cli\u003ethe electrical connection and the condensate drain line;\u003c\/li\u003e\n\u003cli\u003ecommissioning, selecting the mode and setting the temperature;\u003c\/li\u003e\n\u003cli\u003emaintenance advice tailored to how you use hot water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance that keeps the heat pump efficient\u003c\/h3\u003e\n\u003cp\u003eA heat pump water heater needs little maintenance, but a few steps matter. The air intake and the evaporator must stay clear and clean so the heat pump gets enough air. A partial flush through the brass drain valve removes sediment, and periodic inspection of the anode protects the tank. We recommend one maintenance visit per year, especially in areas where the water is harder.\u003c\/p\u003e\n\u003ch3\u003eService area\u003c\/h3\u003e\n\u003cp\u003eWe install this model in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e and \u003cstrong\u003eLongueuil\u003c\/strong\u003e, as well as in Brossard, Boucherville, Saint-Lambert, Terrebonne, Blainville and throughout the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e. Payments can be spread out through our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e program, presented with the quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest your free estimate for the Bradford White RE2H65T10-1NCTT.\u003c\/strong\u003e Send us a few photos of your current tank and its location: we will schedule the visit and give you a clear written quote.\u003c\/p\u003e","brand":"Bradford White","offers":[{"title":"Default Title","offer_id":67801413648676,"sku":"RE2H65T10-1NCTT","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CHAUFFE_EAU_THERMODYNAMIQUE_BRADFORD_WHITE_AEROTHERM_RE2H_RE2H65T10_1NCTT_65_GAL_US_00_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082279"},{"product_id":"chauffe-eau-thermodynamique-bradford-white-re2h80t10-1nctt-80-gallons-montreal-laval-longueuil-rive-sud-rive-nord","title":"BRADFORD WHITE RE2H80T10-1NCTT Heat Pump Water Heater (80 gallons) | Montreal, Laval, Longueuil, South Shore \u0026 North Shore","description":"\u003ch2\u003eA large hot water reserve for very busy homes, heated mostly by a heat pump\u003c\/h2\u003e\n\u003cp\u003eTwo full bathrooms, teenagers showering one after another, a large bath in the evening and loads of laundry almost every day: in this kind of home, an ordinary electric tank quickly runs out of reserve. The \u003cstrong\u003eBradford White RE2H80T10-1NCTT heat pump water heater\u003c\/strong\u003e meets that reality with a tank of \u003cstrong\u003e80 US gallons (67 imperial gallons, 303 L)\u003c\/strong\u003e and an \u003cstrong\u003eintegrated heat pump\u003c\/strong\u003e that produces most of the heat from the room air. It is the largest size in the Bradford White heat pump line that we offer, and AirGreen installs it in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt suits a tank replacement in a large family home as well as new construction or a major renovation, where a mechanical room suited to a unit of this size can be planned from the start.\u003c\/p\u003e\n\u003ch3\u003eWhich homes this size is designed for\u003c\/h3\u003e\n\u003cp\u003eThe RE2H80T10-1NCTT targets households whose hot water use is high and concentrated in time: a family of five, for example, or an intergenerational home where two kitchens and several bathrooms draw on the same tank. It also appeals to homeowners who have installed a large tub or a multi-jet shower and run short of hot water in the evening. For a couple or a small family, a more compact size will often make more sense; we will tell you so frankly during the assessment.\u003c\/p\u003e\n\u003ch3\u003eWhy tank size matters with a heat pump\u003c\/h3\u003e\n\u003cp\u003eThe compressor of a heat pump water heater heats water slowly, but with very little electricity. According to Bradford White, this model recovers 6 US gallons per hour with the compressor alone, and 24 US gallons per hour when the compressor and an element work together. In practical terms, the larger the reserve, the less the unit needs its elements during peaks. With 80 US gallons of hot water in reserve, morning showers draw on water that is already hot, and the heat pump rebuilds the reserve during the day and overnight. This is what lets a large family enjoy a heat pump water heater without spending its time in electric mode.\u003c\/p\u003e\n\u003ch3\u003eManufacturer specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 80 US gallons, 67 imperial gallons, 303 L.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUniform Energy Factor (UEF): 3.59\u003c\/strong\u003e, based on the AHRI directory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor only:\u003c\/strong\u003e 6 US gal\/h or 5 imperial gal\/h at a 90 °F rise; 23 L\/h at a 50 °C rise.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor and element:\u003c\/strong\u003e 24 US gal\/h or 20 imperial gal\/h; 91 L\/h.\u003c\/li\u003e\n\u003cli\u003eData measured in standard hybrid mode, at 19.7 °C (67.5 °F) ambient and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e single-phase 240 V\/208 V, interlocked (non-simultaneous) elements.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScrew-in backup elements:\u003c\/strong\u003e 4,000 W at 240 V; upper element of 3,000 W at 208 V.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater connections:\u003c\/strong\u003e 3\/4 in. (19 mm) NPT with factory-installed dielectric fittings.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 70 13\/16 in. (1,799 mm); \u003cstrong\u003ediameter:\u003c\/strong\u003e 25 in. (635 mm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 259 lb (117 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe principle in a few lines\u003c\/h3\u003e\n\u003cp\u003eOn top of the tank, a fan draws in room air and passes it over an evaporator. The refrigerant picks up the heat from the air, the compressor raises its temperature and a condenser transfers it to the water. A large part of the energy thus comes from the room air rather than from the power grid. The discharged air is cooler and drier, and two electric elements take over when demand requires it.\u003c\/p\u003e\n\u003ch3\u003eFive modes at the pace of a large family\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeat pump mode\u003c\/strong\u003e, which uses only the compressor, works very well with a tank this size when the household routine is steady. \u003cstrong\u003eStandard hybrid mode\u003c\/strong\u003e remains the most versatile choice: the heat pump does most of the work and an element steps in as needed. During busier weeks, such as the holidays or a visit from relatives, \u003cstrong\u003ehybrid plus mode\u003c\/strong\u003e relies more on the elements to keep the reserve full. \u003cstrong\u003eElectric mode\u003c\/strong\u003e serves as a backup, and \u003cstrong\u003evacation mode\u003c\/strong\u003e slows the unit down while you are away. At commissioning, we set the mode according to your family's actual schedule.\u003c\/p\u003e\n\u003ch3\u003ePlanning the location of a tall, heavy unit\u003c\/h3\u003e\n\u003cp\u003eAt 70 13\/16 in. tall and 259 lb, this water heater needs a little more planning than a standard replacement. We measure the headroom under the joists, the width of the stairs and doorways, and the strength of the floor at the intended spot. The manufacturer's location requirements, whether the room's air volume, the clearances or the drainage of condensate water, are confirmed on site. In new construction, it is simple to reserve the space and the drain at the planning stage; in an existing house, an unfinished basement or the mechanical room is usually the best choice.\u003c\/p\u003e\n\u003cp\u003eBecause the discharged air is cooler and drier, the unit cools and dries the room in summer. In winter, in a heated room, part of the captured heat comes from the home's heating system, a point we take into account in our advice.\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe tank receives Bradford White's \u003cstrong\u003eVitraglas with Microban\u003c\/strong\u003e lining and a \u003cstrong\u003eprotective anode rod\u003c\/strong\u003e. The \u003cstrong\u003elow-restriction brass drain valve\u003c\/strong\u003e allows quick flushing, and the factory-installed dielectric fittings on the 3\/4 in. connections limit galvanic corrosion. The manufacturer states that the model is \u003cstrong\u003eENERGY STAR\u003c\/strong\u003e certified, UL listed, C.E.C. listed and meets NAECA requirements.\u003c\/p\u003e\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eThe RE2H80T10-1NCTT runs on a 240 V\/208 V single-phase supply, with factory wiring that keeps the two elements from heating at the same time. In a large, well-equipped home, the electrical panel must keep the necessary capacity; we check the existing circuit and the panel load, then confirm the breaker size according to the nameplate. Electrical work is done under our RBQ licence 5645-9605-01 (ventilation, refrigeration and electrical).\u003c\/p\u003e\n\u003ch3\u003eManufacturer's warranty\u003c\/h3\u003e\n\u003cp\u003eBradford White covers this \"10\" suffix model with a 10-year limited warranty on the tank and 10 years on parts. The detailed terms come with your quote.\u003c\/p\u003e\n\u003ch2\u003eAirGreen installs your 80 US gallon heat pump water heater from start to finish\u003c\/h2\u003e\n\u003cp\u003eA family-owned heating and cooling company established in Montreal, AirGreen has been active for more than fifteen years. After a \u003cstrong\u003efree in-home estimate\u003c\/strong\u003e, you receive a \u003cstrong\u003ewritten quote\u003c\/strong\u003e that sets out every step. Installation of the RE2H80T10-1NCTT includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003echecking the location, access, headroom and the drain for condensate water;\u003c\/li\u003e\n\u003cli\u003edraining and removing the old tank, or preparing the space in new construction;\u003c\/li\u003e\n\u003cli\u003econnecting the cold and hot water lines in 3\/4 in. NPT;\u003c\/li\u003e\n\u003cli\u003einstalling the relief valve and its discharge line;\u003c\/li\u003e\n\u003cli\u003ethe electrical connection and a check of the panel;\u003c\/li\u003e\n\u003cli\u003ecommissioning, and setting the temperature and mode to your family's schedule;\u003c\/li\u003e\n\u003cli\u003emaintenance advice: clear air intake, partial flushing, anode inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEverywhere in Greater Montreal\u003c\/h3\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, Saint-Bruno, Varennes, Mirabel, Repentigny, Mascouche and the whole \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and \u003cstrong\u003eNorth Shore\u003c\/strong\u003e. If you wish to spread out the investment, our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e option is presented with the quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate for the Bradford White RE2H80T10-1NCTT.\u003c\/strong\u003e A few photos of your current tank, the stairs and the intended location help us prepare an efficient visit.\u003c\/p\u003e","brand":"Bradford White","offers":[{"title":"Default Title","offer_id":67801413681444,"sku":"RE2H80T10-1NCTT","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CHAUFFE_EAU_THERMODYNAMIQUE_BRADFORD_WHITE_AEROTHERM_RE2H_RE2H80T10_1NCTT_80_GAL_US_00_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082279"}],"url":"https:\/\/airgreen.ca\/en\/collections\/chauffe-eau-thermodynamiques-montreal-laval-longueuil-rive-sud-et-rive-nord.oembed","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}