{"title":"STELPRO SFE and SFECM Electric Element Furnace | Montreal, Laval, Longueuil, South Shore and North Shore","description":null,"products":[{"product_id":"fournaise-electrique-stelpro-sfe-sfe1021-10-kw-240v","title":"STELPRO SFE SFE1021 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003eA 10 kW furnace that modulates its heat and welcomes a heat pump\u003c\/h2\u003e\n\u003ch3\u003eThe SFE1021 and the homes it suits best\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE1021 is an all-electric furnace: elements heat the air and a 1\/3 HP 4-speed motor moves it through the ducts. What sets it apart is its electronic board, which modulates the elements instead of switching them on all at once. It suits a house or unit that already has ductwork, when the heat loss calculation comes to 10 kW: a bungalow, a two-level condo or a plex unit, for example.\u003c\/p\u003e\n\u003cp\u003eStelpro equips it with an Eco mode, a built-in temperature sensor and two manual-reset thermal cut-outs. The elements are framed individually, and the galvanized steel cabinet, finished in charcoal powder paint, weighs 45 kg (100 lb).\u003c\/p\u003e\n\u003ch3\u003eHow it fits a Quebec home\u003c\/h3\u003e\n\u003cp\u003eIn many ducted homes, the original furnace has been sitting in the basement for decades. The SFE1021 takes its place on the same ductwork. It accepts a 24 V thermostat with 1 or 2 stages, and Stelpro also allows a thermostat with an outdoor sensor. It installs upflow, downflow (with the FSB2 adapter, sold separately) or horizontal, and can stand against a wall with zero clearance, which helps in a narrow mechanical room.\u003c\/p\u003e\n\u003cp\u003eIf a central heat pump is part of your plans, the board is ready: it compensates during defrost and offers two installation modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off while it answers the call. In Type B, it is on the return side and the furnace takes over when the cold reduces its capacity.\u003c\/p\u003e\n\u003cp\u003eOne detail to check: on a 208 V supply, Stelpro publishes 7.5 kW instead of 10 kW. We confirm your building’s voltage before recommending this model.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. It all starts with a free on-site estimate: we measure the space, look at the condition of the ducts and check that the electrical panel can supply a total amperage of 44 A at 240 V. You then receive a written quote.\u003c\/p\u003e\n\u003cp\u003eOn installation day, our technicians:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eremove the old unit and set the SFE1021 in the chosen configuration;\u003c\/li\u003e\n\u003cli\u003econnect it to the ductwork;\u003c\/li\u003e\n\u003cli\u003emake the electrical connection according to Stelpro’s manual and the rating plate;\u003c\/li\u003e\n\u003cli\u003eset up the board and the thermostat, then start the furnace with you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlan for a standard 20 x 20 x 1 in filter: it is not supplied with the furnace.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your home\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIf you live in Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate: we confirm the output you need, give you a written quote and walk you through our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801427116324,"sku":"SFE1021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE1021_00_10_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm1021-10-kw-240v","title":"STELPRO SFECM SFECM1021 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003e10 kW of electric heat and an ECM motor that adjusts airflow to each mode\u003c\/h2\u003e\n\u003ch3\u003eWhat the SFECM version brings\u003c\/h3\u003e\n\u003cp\u003eThe SFECM1021 has the same output as the SFE1021: 10 kW at 240 V, with elements modulated by an electronic board. The difference is in the blower. Stelpro fits it with a 1\/2 HP variable-speed ECM motor, which it highlights for constant airflow and better efficiency. 7-position potentiometers set the airflow for each situation: low or high continuous fan, first- or second-stage heating, cooling.\u003c\/p\u003e\n\u003cp\u003eThis version is for homeowners who keep the fan running for much of the year to move air between the basement and the upper floors, or who plan a humidifier, an air cleaner or a central heat pump.\u003c\/p\u003e\n\u003ch3\u003eIts place in a Quebec home\u003c\/h3\u003e\n\u003cp\u003eTake a semi-detached cottage in \u003cstrong\u003eLaval\u003c\/strong\u003e, heated through ducts, whose original furnace is reaching the end of its life. The SFECM1021 goes in the same spot: upflow, downflow with the FSB2 adapter (sold separately) or horizontal, and with zero clearance against a wall. It accepts a 24 V thermostat with 1 or 2 stages, or a thermostat with an outdoor sensor.\u003c\/p\u003e\n\u003cp\u003eIts board adds terminals the SFE does not have: Y2 for two-stage cooling, plus a humidifier and an air cleaner. With a heat pump, Stelpro provides two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost.\u003c\/p\u003e\n\u003cp\u003eAt 208 V, the published output is 7.5 kW and the total amperage 38 A, compared with 44 A at 240 V.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation, step by step\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eFree on-site estimate: heating needs, duct condition and electrical panel capacity.\u003c\/li\u003e\n\u003cli\u003eWritten quote, with the model and the accessories required: 20 x 20 x 1 in filter, FSB2 adapter or SCOND neutral terminal block if needed.\u003c\/li\u003e\n\u003cli\u003eRemoval of the old unit, placement of the furnace and connection to the ducts.\u003c\/li\u003e\n\u003cli\u003eElectrical connection according to Stelpro’s manual and the rating plate.\u003c\/li\u003e\n\u003cli\u003eSetting of the airflow potentiometers to suit your ductwork, then start-up with you.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the same team handles the ducts, the wiring and, when the time comes, your heat pump.\u003c\/p\u003e\n\u003ch3\u003eYour next step\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, the North Shore and the South Shore, ask for a free estimate of your project. We give you a clear written quote and, if you wish, a \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e option.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801433964836,"sku":"SFECM1021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM1021_00_10_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe1521-15-kw-240v","title":"STELPRO SFE SFE1521 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003e15 kW, precisely modulated, on the ductwork you already have\u003c\/h2\u003e\n\u003ch3\u003eWhat the SFE1521 does\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE1521 is a 15 kW electric furnace at 240 V. Its electronic board modulates individually framed elements instead of switching them on all at once, and a 1\/3 HP motor moves the air through the ducts at one of its four speeds, from 800 to 1,000 CFM at 0.5 in w.c. It also has an Eco mode, a built-in temperature sensor and continuous heat buttons, published at 2.5 kW minimum and 5 kW maximum.\u003c\/p\u003e\n\u003cp\u003eIt is aimed mainly at two-storey houses and cottages heated through ducts, when the heat loss calculation comes to 15 kW. Stelpro sells the SFE models in Quebec only.\u003c\/p\u003e\n\u003ch3\u003eExample: a two-storey cottage\u003c\/h3\u003e\n\u003cp\u003eIn a cottage in \u003cstrong\u003eLongueuil\u003c\/strong\u003e or elsewhere on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, the furnace often sits in the basement, feeding ductwork that serves two floors. The SFE1521 installs there upflow, set against the wall with zero clearance. If the unit has to lie on its side, the horizontal configuration is provided for. For ductwork that runs downward, Stelpro offers the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, Stelpro publishes a total amperage of 65 A at 240 V. In a building supplied at 208 V, the output drops to 11.2 kW and the amperage to 56 A. We always check this before choosing the output.\u003c\/p\u003e\n\u003ch3\u003eWith a central heat pump: Type A or Type B\u003c\/h3\u003e\n\u003cp\u003eStelpro states the SFE1521 is compatible with a heat pump installation and provides two ways to set it up. In Type A, the factory setting, the heat pump is placed downstream: when it is calling, the elements do not heat. In Type B, it is on the return side, and the furnace makes up for its loss of capacity when the cold sets in. In both cases, the board compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eHow we install it\u003c\/h3\u003e\n\u003cp\u003eA family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After a free on-site estimate and a written quote, our technicians remove the old unit, set the furnace, connect it to the ducts and make the electrical connection according to Stelpro’s manual and the rating plate.\u003c\/p\u003e\n\u003cp\u003eThey then choose the motor speed to suit your ductwork, set up the thermostat (24 V, 1 or 2 stages) and check operation with you. The 20 x 20 x 1 in filter is not supplied with the furnace: we account for it in the quote.\u003c\/p\u003e\n\u003ch3\u003eAsk for your estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor a home in Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate. You receive a written quote, advice on the output to choose and, if needed, a \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e solution.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801442648356,"sku":"SFE1521","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE1521_00_15_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm1521-15-kw-240v","title":"STELPRO SFECM SFECM1521 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003eA 15 kW furnace that lets the heat pump work and takes over when needed\u003c\/h2\u003e\n\u003ch3\u003eWhy the ECM version at 15 kW\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM1521 delivers 15 kW at 240 V, with the SFE series’ modulating electronic board and its individually framed elements. Its strength: a 1\/2 HP variable-speed ECM motor. Instead of a few wired speeds, it follows airflow values set with 7-position potentiometers, different for continuous fan, first-stage heating (W1), second-stage heating (W2) and cooling (Y1). Stelpro points to the constant airflow and better efficiency of this type of motor.\u003c\/p\u003e\n\u003cp\u003eIt makes the most sense when the furnace has to work alongside a central heat pump, or when you want to keep a low-speed continuous fan running, within a range of 300 to 700 CFM according to Stelpro.\u003c\/p\u003e\n\u003ch3\u003eExample: a split-level home adding a heat pump\u003c\/h3\u003e\n\u003cp\u003ePicture a split-level home on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, heated through ducts, where the owners are adding a central heat pump. The SFECM1521 goes in the basement upflow, set against the wall with zero clearance, or horizontal if the space calls for it. With the coil downstream, Type A mode (factory setting) keeps the elements off while the heat pump answers the call. With the coil on the return side, Type B mode lets the furnace make up for the heat pump’s loss of capacity in cold weather. In both cases, the board compensates during defrost.\u003c\/p\u003e\n\u003cp\u003eIn summer, the Y2 terminal accepts two-stage cooling, and the cooling airflow is set separately from heating. The board also has terminals for a humidifier and an air cleaner.\u003c\/p\u003e\n\u003ch3\u003eOn the electrical side\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 65 A at 240 V. In a building supplied at 208 V, the output becomes 11.2 kW and the amperage 56 A. Breaker and conductor sizes are confirmed from the installation manual and the rating plate: our team takes care of it before any wiring.\u003c\/p\u003e\n\u003ch3\u003eOn installation day\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After the free estimate and the written quote, our technicians:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eremove the old unit and install the SFECM1521 in the chosen configuration;\u003c\/li\u003e\n\u003cli\u003econnect it to the ducts and, where applicable, to the heat pump coil;\u003c\/li\u003e\n\u003cli\u003emake the electrical connection;\u003c\/li\u003e\n\u003cli\u003eset each airflow to suit your ductwork and configure Type A or Type B mode;\u003c\/li\u003e\n\u003cli\u003estart the system and show you the thermostat settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 20 x 20 x 1 in filter is not supplied, nor are the FSB2 adapter or the SCOND neutral terminal block: we add them to the quote when needed.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMontreal, Laval, Longueuil, North Shore or South Shore: ask for a free estimate. We confirm the model, give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801451331876,"sku":"SFECM1521","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM1521_00_15_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe1821-17-5-kw-240v","title":"STELPRO SFE SFE1821 Electric Furnace | 17.5 kW - 240V","description":"\u003ch2\u003e17.5 kW: the right output when 15 kW is no longer enough\u003c\/h2\u003e\n\u003ch3\u003eAn in-between output, chosen with care\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE1821 delivers 17.5 kW at 240 V. This size fills the gap between the 15 and 20 kW models of the SFE series: it fits when the heat loss calculation is above 15 kW without justifying 20 kW. A correctly sized furnace calls for an electrical supply in proportion to your real needs.\u003c\/p\u003e\n\u003cp\u003eOtherwise, it shares the series’ strengths: an electronic board that modulates individually framed elements, an Eco mode, a built-in temperature sensor, two manual-reset thermal cut-outs and a 1\/3 HP motor with four speeds, from 800 to 1,000 CFM at 0.5 in w.c. Its continuous heat buttons are published at 2.5 kW minimum and 5 kW maximum.\u003c\/p\u003e\n\u003ch3\u003eExample: the owner’s unit in a duplex\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eMontreal\u003c\/strong\u003e, many duplex owners live on the ground floor and in the basement, heated by a furnace and ductwork. When that furnace reaches the end of its life, the SFE1821 goes in the same spot: upflow against a wall with zero clearance, or horizontal. For ductwork that runs downward, Stelpro provides the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eIf a central heat pump is added later, the board is already ready. In Type A mode, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B mode, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eElectricity, to check first\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 75 A at 240 V and 66 A at 208 V, a voltage at which the output drops to 13.2 kW. In an older plex, the capacity of the electrical service deserves a check: it is one of the first things we look at during the estimate.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen does\u003c\/h3\u003e\n\u003cp\u003eA family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We come to you for a free estimate, then give you a written quote. Our technicians remove the old unit, set the SFE1821 and connect it to the ducts, make the electrical connection according to Stelpro’s manual and the rating plate, then set the motor speed and the 24 V thermostat. Plan for a standard 20 x 20 x 1 in filter, not supplied with the furnace.\u003c\/p\u003e\n\u003ch3\u003eYour free estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore and the South Shore, ask for your free estimate: we confirm the output, give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801456705828,"sku":"SFE1821","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE1821_00_17_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm1821-17-5-kw-240v","title":"STELPRO SFECM SFECM1821 Electric Furnace | 17.5 kW - 240V","description":"\u003ch2\u003eA 17.5 kW ECM furnace for better-controlled air, summer and winter\u003c\/h2\u003e\n\u003ch3\u003eThe idea: modulated elements, tailored airflow\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM1821 produces 17.5 kW at 240 V with individually framed elements modulated by an electronic board, like the whole SFE series. What changes is the motor: a 1\/2 HP variable-speed ECM, which Stelpro highlights for constant airflow and better efficiency. 7-position potentiometers set the airflow for each mode, so continuous fan, heating and cooling do not run at the same speed.\u003c\/p\u003e\n\u003cp\u003eThe 18 in its model number is a code: Stelpro publishes 17.5 kW, an output between the 15 and 20 kW sizes.\u003c\/p\u003e\n\u003ch3\u003eWhich homes it suits\u003c\/h3\u003e\n\u003cp\u003eThink of a two-storey house on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e with a finished basement, heated through ducts. The basement stays cool while the upper floor warms up: a low-speed continuous fan helps move air between the levels. The SFECM1821 installs in the basement upflow, against a wall with zero clearance, horizontal, or downflow with the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eIt also suits the owner who is replacing an old furnace and wants the house ready for a central heat pump, without redoing everything the day it arrives.\u003c\/p\u003e\n\u003ch3\u003eDry winters, humid summers: the extra connections\u003c\/h3\u003e\n\u003cp\u003eThe SFECM board has terminals the SFE does not offer: a humidifier for winter, an air cleaner, and Y2 for two-stage cooling. With a central heat pump, Stelpro provides two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eInstallation and electricity\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 75 A at 240 V. At 208 V, the amperage is 66 A and the output 13.2 kW. We check your electrical service during the free estimate, then the breaker and conductor sizes from the installation manual and the rating plate.\u003c\/p\u003e\n\u003cp\u003eAirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After the written quote, our technicians remove the old unit, install and connect the furnace, make the electrical connection, set each airflow to suit your ductwork and explain the thermostat to you. The 20 x 20 x 1 in filter is not supplied: we add it to the quote.\u003c\/p\u003e\n\u003ch3\u003eTaking the next step\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhether you are in Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for a free estimate. You will receive a written quote and, if you wish, a \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e option.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801473843492,"sku":"SFECM1821","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM1821_00_17_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm3021-30-kw-240v","title":"STELPRO SFECM SFECM3021 Electric Furnace | 30 kW - 240V","description":"\u003ch2\u003eThe top of the SFE series: 30 kW, a 1 HP ECM motor and every connection\u003c\/h2\u003e\n\u003ch3\u003eFirst, the electrical question\u003c\/h3\u003e\n\u003cp\u003eAt 30 kW at 240 V, the SFECM3021 draws a total amperage of 130 A according to Stelpro, or 113 A at 208 V, a voltage at which the output drops to 22.5 kW. A project of this size therefore starts with the electrical service: available capacity, room in the panel, then breaker and conductor sizes taken from the installation manual and the rating plate. If the heat loss calculation gives less than 30 kW, we will point you to a smaller SFECM size.\u003c\/p\u003e\n\u003ch3\u003eWhat makes it the most complete model\u003c\/h3\u003e\n\u003cp\u003eIt brings together the highest output in the series, a variable-speed ECM motor and the 1 HP size, plus the Y2, humidifier and air cleaner terminals specific to the SFECM models. Stelpro points to this motor’s constant airflow and better efficiency. Each mode has its own range, set with 7-position potentiometers: 400 to 1,200 CFM on low continuous fan, 1,200 to 2,000 CFM on high, and up to 2,200 CFM in both heating and cooling.\u003c\/p\u003e\n\u003cp\u003eOn the heating side, the elements are individually framed and modulated by the board, which includes an Eco mode, a temperature sensor and two manual-reset thermal cut-outs.\u003c\/p\u003e\n\u003ch3\u003eExample: a large new build\u003c\/h3\u003e\n\u003cp\u003eThink of a new three-level home on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, served by a single duct system, with a two-stage central heat pump, a humidifier and an air cleaner. The SFECM3021 becomes the heart of the system: it heats when the demand calls for it, gives the coil the high airflow it needs and takes the accessories on its board.\u003c\/p\u003e\n\u003cp\u003eDepending on where the coil goes, we configure it in Type A, the factory setting, where the elements give way to the heat pump placed downstream, or in Type B, where the furnace supplements a heat pump installed on the return side when the cold reduces its capacity. Either way, the board compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eWhat our installation includes\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business from \u003cstrong\u003eMontreal\u003c\/strong\u003e, active for more than fifteen years and holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After the free estimate and the written quote, we take care of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003esetting the 48 kg (105 lb) cabinet upflow, horizontal or downflow with the FSB2 adapter, sold separately;\u003c\/li\u003e\n\u003cli\u003econnecting it to the ducts and, where applicable, to the heat pump coil;\u003c\/li\u003e\n\u003cli\u003ethe electrical connection according to Stelpro’s manual and the rating plate;\u003c\/li\u003e\n\u003cli\u003esetting each airflow range and configuring the thermostat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 20 x 20 x 1 in filter is not supplied: we add it to the quote.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your build or renovation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor a project in Montreal, Laval, Longueuil, on the North Shore or the South Shore, book your free estimate. Detailed written quote and \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801486819620,"sku":"SFECM3021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM3021_00_30_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe3021-30-kw-240v","title":"STELPRO SFE SFE3021 Electric Furnace | 30 kW - 240V","description":"\u003ch2\u003e30 kW: the highest output in the SFE series, for homes that truly need it\u003c\/h2\u003e\n\u003ch3\u003eWho it is for, and who it is not for\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE3021 produces 30 kW at 240 V, the largest size in the SFE series. It is the right furnace when the heat loss calculation comes to 30 kW: a very large house, or a home on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e extended several times and heated by a single duct system. If the calculation gives less, a smaller size in the series is a better fit: an oversized furnace calls for a bigger electrical service without making the house more comfortable. We check this before any recommendation.\u003c\/p\u003e\n\u003ch3\u003eWhat it offers\u003c\/h3\u003e\n\u003cp\u003eThe electronic board modulates individually framed elements, with Eco mode, a built-in temperature sensor and two manual-reset thermal cut-outs. Its continuous heat buttons are the highest in the series: 5 kW minimum, 10 kW maximum. The 1 HP motor offers three speeds at 0.5 in w.c.: 1,525, 1,600 and 1,750 CFM.\u003c\/p\u003e\n\u003cp\u003eThe galvanized steel cabinet, finished in charcoal powder paint, weighs 48 kg (105 lb). It installs upflow, downflow with the FSB2 adapter (sold separately) or horizontal, and can stand against a wall with zero clearance.\u003c\/p\u003e\n\u003ch3\u003eAn electrical service that measures up\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 130 A at 240 V. That is the figure that decides whether the project is feasible: electrical service capacity, room in the panel, breaker and conductor sizes according to the installation manual and the rating plate. In a building supplied at 208 V, the output drops to 22.5 kW and the amperage to 113 A.\u003c\/p\u003e\n\u003ch3\u003eInstallation and heat pump\u003c\/h3\u003e\n\u003cp\u003eAirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After a free estimate and a written quote, our technicians remove the old unit, set the SFE3021, connect it to the ducts, make the electrical connection, choose the motor speed and set up the 24 V thermostat with 1 or 2 stages. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003cp\u003eIf a central heat pump is part of the project, Stelpro provides two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eStart with an estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate: we confirm the right output, give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801505431844,"sku":"SFE3021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE3021_00_30_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe2021-20-kw-240v","title":"STELPRO SFE SFE2021 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003e20 kW of modulated electric heat for homes that need more\u003c\/h2\u003e\n\u003ch3\u003eWhat you get with the SFE2021\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE2021 produces 20 kW at 240 V. Like the whole SFE series, it modulates its individually framed elements with an electronic board that has an Eco mode and a built-in temperature sensor. Its 1\/3 HP motor offers four speeds: 900, 1,110 and 1,200 CFM wired at the factory, and an optional 950 CFM speed, all measured at 0.5 in w.c. The continuous heat buttons are published at 2.5 kW minimum and 5 kW maximum, and two manual-reset thermal cut-outs protect the unit.\u003c\/p\u003e\n\u003ch3\u003eSFE2021 or the 1 HP version\u003c\/h3\u003e\n\u003cp\u003eStelpro offers a 1 HP motor from 20 kW up. The SFE2021 keeps the standard motor: it is the logical choice when the existing ducts and the matched equipment are well served by 900 to 1,200 CFM. If the ductwork or a future heat pump coil calls for more air, the SFE20211HP, with the same output, is worth comparing. We check this during the estimate.\u003c\/p\u003e\n\u003ch3\u003eExample: an extended home\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eLaval\u003c\/strong\u003e, many houses have gained a room or two over the years of renovations, and the ductwork has followed. When the old furnace is no longer enough, the SFE2021 goes in the same spot: upflow, set against a wall with zero clearance, horizontal, or downflow with the FSB2 adapter, sold separately. In this kind of house, the ducts often serve rooms far from the furnace: we look at the ductwork before choosing the motor speed.\u003c\/p\u003e\n\u003cp\u003eWith a central heat pump, the board offers two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity when it is cold. On the electrical side, Stelpro publishes 85 A at 240 V. At 208 V, the amperage becomes 74 A and the output 15 kW: a point to confirm before ordering.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work. We start with a free on-site estimate and a written quote. Our technicians then remove the old unit, install the SFE2021, connect it to the ducts, make the electrical connection according to Stelpro’s manual and the rating plate, choose the motor speed and set up the 24 V thermostat with 1 or 2 stages. Plan for the 20 x 20 x 1 in filter: it is not supplied.\u003c\/p\u003e\n\u003ch3\u003eAsk for your quote\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate and receive a written quote. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801521094948,"sku":"SFE2021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE2021_00_20_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm2721-27-5-kw-240v","title":"STELPRO SFECM SFECM2721 Electric Furnace | 27.5 kW - 240V","description":"\u003ch2\u003e27.5 kW and a 1 HP ECM motor: high output, finely tuned\u003c\/h2\u003e\n\u003ch3\u003eWide airflow ranges, set mode by mode\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM2721 produces 27.5 kW at 240 V with the SFE series’ modulating electronic board: individually framed elements, Eco mode, built-in temperature sensor, two manual-reset thermal cut-outs. Its motor is a 1 HP variable-speed ECM, and that is what sets it apart. 7-position potentiometers set an airflow specific to each mode, within wide ranges: continuous fan goes from 400 to 2,000 CFM depending on the low or high setting, and both heating and cooling go up to 2,200 CFM. Stelpro points to this motor’s constant airflow and better efficiency.\u003c\/p\u003e\n\u003cp\u003eThe 27 in the model number is a code: the published output is 27.5 kW.\u003c\/p\u003e\n\u003ch3\u003eExample: a duplex turned single-family home\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eMontreal\u003c\/strong\u003e, owners sometimes convert a duplex into a large single-family home, heated by one duct system over two floors and a basement. If the heat loss calculation comes to 27.5 kW, the SFECM2721 can heat the whole house and supply a central heat pump coil that needs a lot of air. A single, well-adjusted unit then replaces the old duplex’s two furnaces, if there were two.\u003c\/p\u003e\n\u003cp\u003eWith the heat pump, Stelpro provides Type A (factory setting: heat pump downstream, elements off during its call) or Type B (heat pump on the return side: furnace backup in cold weather). The board also compensates during defrost, and the Y2 terminal accepts two-stage cooling. Two other terminals take a humidifier and an air cleaner.\u003c\/p\u003e\n\u003ch3\u003eElectricity: an amperage to plan for\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 119 A at 240 V and 104 A at 208 V, a voltage at which the output drops to 20.7 kW. We check the electrical service’s capacity right at the estimate, then the breaker and conductor sizes from the installation manual and the rating plate.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After the free estimate and the written quote, our technicians set the 48 kg (105 lb) furnace upflow, downflow (FSB2 adapter, sold separately) or horizontal, connect it to the ducts, make the electrical connection, set each airflow range and configure the thermostat. The 20 x 20 x 1 in filter is not supplied, nor is the SCOND neutral terminal block.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your project\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate. You receive a written quote and, if you wish, a \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e option.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801561137444,"sku":"SFECM2721","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM2721_00_27_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe20211hp-20-kw-240v","title":"STELPRO SFE SFE20211HP Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003eThe same 20 kW, with a 1 HP motor for duct systems that need more air\u003c\/h2\u003e\n\u003ch3\u003eWhy a 1 HP motor\u003c\/h3\u003e\n\u003cp\u003eA furnace only heats the house well if air flows through the whole duct system. The Stelpro SFE20211HP keeps the 20 kW output at 240 V and the modulating electronic board of the SFE series, but hands the air moving to a 1 HP motor. Stelpro publishes three speeds: 1,600, 1,650 and 1,800 CFM, measured at 0.5 in w.c.\u003c\/p\u003e\n\u003cp\u003eThe rest of the equipment is all there: Eco mode, built-in temperature sensor, individually framed elements, two manual-reset thermal cut-outs and continuous heat buttons published at 2.5 kW minimum and 5 kW maximum.\u003c\/p\u003e\n\u003ch3\u003eWhen to choose it\u003c\/h3\u003e\n\u003cp\u003eTake a large three-level house on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, heated by a single furnace in the basement. The top-floor bedrooms are far away and the ducts are long. A blower that is too weak shows quickly: distant rooms stay cooler and air barely comes out of the registers. In this kind of system, or when a central heat pump coil needs high airflow, the 1 HP motor makes the difference. Conversely, if the ductwork is fine with more modest airflow, the standard-motor SFE2021 may be enough: we compare the two during the estimate.\u003c\/p\u003e\n\u003cp\u003eThe 48 kg (105 lb) cabinet installs upflow, downflow with the FSB2 adapter (sold separately) or horizontal, and can stand against a wall with zero clearance.\u003c\/p\u003e\n\u003ch3\u003eWith a central heat pump\u003c\/h3\u003e\n\u003cp\u003eStelpro states the furnace is compatible with a heat pump. In Type A, the factory setting, the heat pump is downstream and the elements do not heat during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eInstallation and electricity\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 88 A at 240 V and 77 A at 208 V, a voltage at which the output drops to 15 kW. AirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After a free estimate and a written quote, our technicians set the furnace, connect it to the ducts, make the electrical connection according to the manual and the rating plate, choose the motor speed to suit the ductwork and set up the thermostat. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your ductwork\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for a free estimate: we assess the airflow your home needs, give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801565724964,"sku":"SFE20211HP","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE20211HP_00_20_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe2721-27-5-kw-240v","title":"STELPRO SFE SFE2721 Electric Furnace | 27.5 kW - 240V","description":"\u003ch2\u003e27.5 kW of electric heat for very large homes\u003c\/h2\u003e\n\u003ch3\u003eWhat the SFE2721 brings\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE2721 produces 27.5 kW at 240 V, just below the series’ 30 kW model. At this output, the standard motor is a 1 HP unit with three speeds: 1,525, 1,600 and 1,750 CFM at 0.5 in w.c. The electronic board modulates individually framed elements, with Eco mode, a built-in temperature sensor and two manual-reset thermal cut-outs. Its continuous heat buttons go further than on the smaller models: 2.5 kW minimum, 7.5 kW maximum.\u003c\/p\u003e\n\u003cp\u003eThe 27 in the model number is a code: Stelpro publishes 27.5 kW, and that is the value used for sizing.\u003c\/p\u003e\n\u003ch3\u003eElectricity first\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 119 A at 240 V. That is a significant load, to be checked before any other decision: electrical service capacity, room in the panel, breaker and conductor sizes according to the installation manual and the rating plate. In a building supplied at 208 V, the output drops to 20.7 kW and the amperage to 104 A. In many homes, this check decides the project: if the electrical service needs an upgrade, it is better to know before ordering the furnace.\u003c\/p\u003e\n\u003ch3\u003eExample: a multigenerational home\u003c\/h3\u003e\n\u003cp\u003eOn the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e as in \u003cstrong\u003eLaval\u003c\/strong\u003e, some families share a large multigenerational home heated by a single duct system. When the heat loss calculation comes to 27.5 kW, the SFE2721 replaces the old furnace in the same spot: upflow against a wall with zero clearance, horizontal, or downflow with the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eIf a central heat pump is added, Stelpro provides Type A (factory setting: heat pump downstream, elements off during its call) and Type B (heat pump on the return side: furnace backup in cold weather), with compensation during defrost.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the same team handles the ducts and the wiring of this furnace. After a free estimate and a written quote, our technicians remove the old unit, set the SFE2721, which weighs 48 kg (105 lb), connect it to the ducts, make the electrical connection, choose the motor speed to suit your ductwork and set up the 24 V thermostat with 1 or 2 stages. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eAsk for an estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate. We give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801613566244,"sku":"SFE2721","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE2721_00_27_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm2021-20-kw-240v","title":"STELPRO SFECM SFECM2021 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003e20 kW, an ECM motor and two clearly distinct heating stages\u003c\/h2\u003e\n\u003ch3\u003eHeating in two steps\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM2021 produces 20 kW at 240 V. Its electronic board modulates individually framed elements, and its 1\/2 HP variable-speed ECM motor adapts the airflow to what the thermostat calls for. In mild weather, the first stage (W1) is often enough, with airflow set within a lower range. When the cold deepens, the second stage (W2) takes over with higher airflow. 7-position potentiometers set each of these ranges, as well as those for cooling (Y1) and continuous fan.\u003c\/p\u003e\n\u003cp\u003eStelpro highlights the constant airflow and better efficiency of its ECM motor, and adds Y2, air cleaner and humidifier terminals on the SFECM.\u003c\/p\u003e\n\u003ch3\u003e1\/2 HP or 1 HP version\u003c\/h3\u003e\n\u003cp\u003eAt 20 kW, Stelpro offers two ECM motors. The SFECM2021 uses the 1\/2 HP, while the SFECM20211HP moves up to 1 HP for duct systems that need more air. If your ducts and cooling equipment are well served by the published range, up to 1,450 CFM, the 1\/2 HP version does the job. We check the ductwork before recommending one or the other.\u003c\/p\u003e\n\u003ch3\u003eExample: an open-concept home\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eLongueuil\u003c\/strong\u003e, an open-concept home heated through ducts can see temperature differences between the kitchen, the living room and the upper floor. A low-speed continuous fan, published at 300 to 700 CFM, helps reduce them. The SFECM2021 goes in the basement upflow, against a wall with zero clearance, horizontal, or downflow with the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eIf a central heat pump is added, Stelpro provides Type A (factory setting: heat pump downstream, elements off during its call) or Type B (heat pump on the return side: furnace backup in cold weather), with compensation during defrost.\u003c\/p\u003e\n\u003ch3\u003eOur installation\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 85 A at 240 V and 74 A at 208 V, a voltage at which the output becomes 15 kW. AirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years and holder of RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work, checks these points during the free estimate, then gives you a written quote.\u003c\/p\u003e\n\u003cp\u003eOn the day, our technicians replace the old unit, connect the furnace to the ducts, make the electrical connection according to the manual and the rating plate, set each airflow range and configure the thermostat. Plan for the 20 x 20 x 1 in filter: it is not supplied.\u003c\/p\u003e\n\u003ch3\u003eAsk for your estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore and the South Shore, we come to you for a free estimate and give you a written quote. Ask us about \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options too.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801662062884,"sku":"SFECM2021","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM2021_00_20_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm20211hp-20-kw-240v","title":"STELPRO SFECM SFECM20211HP Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003e20 kW and a 1 HP ECM motor for large duct systems\u003c\/h2\u003e\n\u003ch3\u003eWhat sets it apart\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM20211HP brings together the series’ two options: the SFECM version, with its variable-speed ECM motor, and the 1 HP motor Stelpro offers from 20 kW up. It produces 20 kW at 240 V with individually framed elements, modulated by an electronic board with Eco mode and a built-in temperature sensor. 7-position potentiometers set the airflow for each mode: continuous fan, W1 and W2 heating, Y1 cooling. Stelpro highlights the constant airflow and better efficiency of its ECM motors.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003ePicture a very spread-out bungalow on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, with a full basement and ducts running from one end to the other. The longer the duct system, the harder the blower has to work to deliver air to distant rooms. It is for this kind of house, or for a central heat pump coil that needs high airflow, that Stelpro offers the 1 HP motor. If your ductwork is more compact, the SFECM2021, with a 1\/2 HP motor, may be enough: we compare the two on site.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, we also confirm the airflow ranges specific to this code from Stelpro’s documentation. The final adjustment is made on site, once the furnace is connected, so that each room gets its share of air.\u003c\/p\u003e\n\u003ch3\u003eHeat pump and accessories\u003c\/h3\u003e\n\u003cp\u003eWith a central heat pump, Stelpro provides two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost. The Y2 terminal accepts two-stage cooling, and two other terminals take a humidifier and an air cleaner.\u003c\/p\u003e\n\u003ch3\u003eElectricity and installation\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 88 A at 240 V and 77 A at 208 V, a voltage at which the output becomes 15 kW. The cabinet weighs 48 kg (105 lb). AirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003cp\u003eAfter the free estimate and the written quote, our technicians install the furnace upflow, downflow (FSB2 adapter, sold separately) or horizontal, connect it to the ducts, make the electrical connection according to the manual and the rating plate, then set each airflow. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eYour project, our estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for a free estimate. You receive a detailed written quote and, if needed, a \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e option.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801678971172,"sku":"SFECM20211HP","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM20211HP_00_20_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe2321-22-5-kw-240v","title":"STELPRO SFE SFE2321 Electric Furnace | 22.5 kW - 240V","description":"\u003ch2\u003e22.5 kW for the homes that demand the most heat\u003c\/h2\u003e\n\u003ch3\u003eWhat to know about the SFE2321\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE2321 produces 22.5 kW at 240 V, the highest output in the SFE series with the 1\/3 HP motor. That motor offers four speeds at 0.5 in w.c.: 950, 1,110 and 1,200 CFM wired at the factory, and 900 CFM as an optional speed. The electronic board modulates individually framed elements, with Eco mode, a built-in temperature sensor, continuous heat buttons published at 2.5 kW (min.) and 5 kW (max.) and two manual-reset thermal cut-outs.\u003c\/p\u003e\n\u003cp\u003eA naming detail: the 23 in the model number is a code. Stelpro publishes 22.5 kW, and that is the value that counts for sizing.\u003c\/p\u003e\n\u003ch3\u003eExample: an older brick house\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eMontreal\u003c\/strong\u003e, some older brick houses lose a lot of heat through the walls and windows. An output this high has to be justified by the home’s heat loss calculation. If that calculation comes to 22.5 kW, the SFE2321 replaces the old furnace on the same ductwork. It installs upflow, set against a wall with zero clearance, horizontal, or downflow with the FSB2 adapter, sold separately.\u003c\/p\u003e\n\u003cp\u003eIf you add a central heat pump, Stelpro provides two modes. In Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity when it is very cold. The board also compensates during defrost.\u003c\/p\u003e\n\u003ch3\u003eElectricity: an amperage to plan for\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 96 A at 240 V. That is a significant load for an older electrical panel: we check your electrical service right at the estimate. In a building supplied at 208 V, the output drops to 16.9 kW and the amperage to 84 A. Breaker and conductor sizes are confirmed from the installation manual and the rating plate.\u003c\/p\u003e\n\u003ch3\u003eOur installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After the free estimate and the written quote, our technicians remove the old unit, set and connect the SFE2321, make the electrical connection, choose the motor speed to suit your ductwork and set up the 24 V thermostat with 1 or 2 stages. If the ducts need more air, we will talk to you about the SFE23211HP, with a 1 HP motor. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eA free on-site estimate\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate. We give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801694798116,"sku":"SFE2321","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE2321_00_22_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082502"},{"product_id":"fournaise-electrique-stelpro-sfe-sfe23211hp-22-5-kw-240v","title":"STELPRO SFE SFE23211HP Electric Furnace | 22.5 kW - 240V","description":"\u003ch2\u003e22.5 kW and a 1 HP motor: the heat, and the air to carry it everywhere\u003c\/h2\u003e\n\u003ch3\u003eAn SFE built for large duct systems\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFE23211HP produces 22.5 kW at 240 V, like the SFE2321, but replaces its 1\/3 HP motor with a 1 HP motor. Stelpro publishes three speeds at 0.5 in w.c.: 1,600, 1,650 and 1,800 CFM. The rest follows the SFE series recipe: an electronic board that modulates individually framed elements, an Eco mode, a built-in temperature sensor, continuous heat buttons published at 2.5 kW (min.) and 5 kW (max.) and two manual-reset thermal cut-outs.\u003c\/p\u003e\n\u003cp\u003eWhy airflow matters so much: a 22.5 kW furnace warms the air quickly, but it is the ducts that deliver that heat to the rooms. If the blower lacks push for the length of the ductwork, the rooms at the end of the line get less of it. The 1 HP motor is aimed squarely at that situation.\u003c\/p\u003e\n\u003ch3\u003eThree checks before choosing it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cstrong\u003eThe airflow your ductwork needs.\u003c\/strong\u003e In a large home in \u003cstrong\u003eLaval\u003c\/strong\u003e with long ducts spread over several floors, or with a central heat pump coil that needs a lot of air, this motor is justified. For more modest ductwork, the SFE2321 may be enough.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe capacity of your electrical service.\u003c\/strong\u003e Stelpro publishes 99 A at 240 V and 87 A at 208 V, a voltage at which the output drops to 16.9 kW. We check the panel during the estimate.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpace and access.\u003c\/strong\u003e The cabinet weighs 48 kg (105 lb). It installs upflow, downflow (FSB2 adapter, sold separately) or horizontal, and can stand against a wall with zero clearance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWith a central heat pump\u003c\/h3\u003e\n\u003cp\u003eStelpro states the furnace is compatible with a heat pump installation. In Type A, the factory setting, the heat pump is downstream and the elements do not heat during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost, and the thermostat can be 1- or 2-stage, or fitted with an outdoor sensor.\u003c\/p\u003e\n\u003ch3\u003eInstalled by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We start with a free estimate and a written quote. Our technicians then remove the old unit, set the SFE23211HP, connect it to the ducts, make the electrical connection according to Stelpro’s manual and the rating plate, choose the motor speed and set up the thermostat. Plan for a 20 x 20 x 1 in filter, not supplied.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your home\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate and your written quote. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801696960804,"sku":"SFE23211HP","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFE_SFE23211HP_00_22_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm23211hp-22-5-kw-240v","title":"STELPRO SFECM SFECM23211HP Electric Furnace | 22.5 kW - 240V","description":"\u003ch2\u003e22.5 kW and a 1 HP ECM motor: the most complete version in the series at this output\u003c\/h2\u003e\n\u003ch3\u003eFour 22.5 kW versions: how to tell them apart\u003c\/h3\u003e\n\u003cp\u003eStelpro offers four 22.5 kW furnaces in the SFE family. They share the same output and the same modulating electronic board, but differ in the motor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSFE2321\u003c\/strong\u003e: 1\/3 HP motor with preset speeds;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSFE23211HP\u003c\/strong\u003e: 1 HP motor with preset speeds, for more air;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSFECM2321\u003c\/strong\u003e: 1\/2 HP variable-speed ECM motor;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSFECM23211HP\u003c\/strong\u003e: 1 HP variable-speed ECM motor, the model on this page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SFECM23211HP therefore combines the airflow of a 1 HP motor with the flexibility of an ECM motor, which Stelpro highlights for constant airflow and better efficiency. 7-position potentiometers set the airflow for each mode. The 23 in the model number is a code: the published output is 22.5 kW at 240 V.\u003c\/p\u003e\n\u003ch3\u003eWhich type of home it suits\u003c\/h3\u003e\n\u003cp\u003eIt is aimed at large homes whose heat loss calculation comes to 22.5 kW and whose ductwork is long or highly branched: a cottage in \u003cstrong\u003eLongueuil\u003c\/strong\u003e with a finished basement and a full upper floor, for example, or a home getting a central heat pump whose coil needs high airflow. Before ordering, we confirm the airflow ranges specific to this code from Stelpro’s documentation.\u003c\/p\u003e\n\u003ch3\u003eHeat pump, cooling and air quality\u003c\/h3\u003e\n\u003cp\u003eIn Type A, the factory setting, the heat pump is downstream and the elements stay off during its call. In Type B, it is on the return side and the furnace makes up for its loss of capacity in cold weather. The board also compensates during defrost. The SFECM’s Y2, air cleaner and humidifier terminals allow two-stage cooling and the connection of indoor air quality accessories.\u003c\/p\u003e\n\u003ch3\u003eElectricity and installation\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 99 A at 240 V and 87 A at 208 V, a voltage at which the output becomes 16.9 kW. The cabinet weighs 48 kg (105 lb). AirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years and holder of RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work, checks your electrical service during the free estimate, then gives you a written quote.\u003c\/p\u003e\n\u003cp\u003eOur technicians set the furnace upflow, downflow (FSB2 adapter, sold separately) or horizontal, connect it to the ducts, make the connection according to the manual and the rating plate, then set each airflow. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eLet’s review it together\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate: we help you choose the right version, give you a written quote and present the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801698205988,"sku":"SFECM23211HP","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM23211HP_00_22_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"},{"product_id":"fournaise-electrique-stelpro-sfecm-sfecm2321-22-5-kw-240v","title":"STELPRO SFECM SFECM2321 Electric Furnace | 22.5 kW - 240V","description":"\u003ch2\u003e22.5 kW and an ECM motor to back up the heat pump when winter bites\u003c\/h2\u003e\n\u003ch3\u003eThe SFECM2321 in a few words\u003c\/h3\u003e\n\u003cp\u003eThe Stelpro SFECM2321 produces 22.5 kW at 240 V, the highest output of the SFECM models with the 1\/2 HP motor. It keeps the SFE series’ modulating electronic board, with its individually framed elements, Eco mode and built-in temperature sensor, and adds a variable-speed ECM motor that Stelpro highlights for constant airflow and better efficiency. The 23 in the model number is a code: the published output is 22.5 kW.\u003c\/p\u003e\n\u003ch3\u003eWhen the heat pump slows down, the furnace takes over\u003c\/h3\u003e\n\u003cp\u003eA central heat pump loses capacity as the outdoor temperature drops. With the coil installed on the furnace’s return side, Stelpro’s Type B mode lets the SFECM2321 make up for that loss. With the coil downstream, Type A mode, set at the factory, keeps the elements off while the heat pump answers the call. In both cases, the board compensates during defrost.\u003c\/p\u003e\n\u003cp\u003eTake a large two-storey home on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e: the heat pump heats as long as it can keep up, and the furnace adds its heat when the cold deepens. The choice between the two modes depends mostly on where the coil can be installed in your ductwork: we decide it on site. In summer, the Y2 terminal allows two-stage cooling.\u003c\/p\u003e\n\u003ch3\u003eSettings and accessories\u003c\/h3\u003e\n\u003cp\u003e7-position potentiometers set the airflow for each mode: low or high continuous fan, W1 and W2 heating, Y1 cooling. The board also has terminals for a humidifier and an air cleaner. If the ductwork needs more air than the published range, which goes up to 1,450 CFM, Stelpro offers the SFECM23211HP, with a 1 HP ECM motor.\u003c\/p\u003e\n\u003ch3\u003eElectricity and installation\u003c\/h3\u003e\n\u003cp\u003eStelpro publishes a total amperage of 96 A at 240 V and 84 A at 208 V, a voltage at which the output drops to 16.9 kW. AirGreen, a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work: we check your electrical service during the free estimate, then give you a written quote.\u003c\/p\u003e\n\u003cp\u003eOur technicians install the furnace upflow, downflow (FSB2 adapter, sold separately) or horizontal, connect it to the ducts and to the coil where applicable, make the electrical connection according to the manual and the rating plate, configure Type A or Type B mode and set the airflow. The 20 x 20 x 1 in filter is not supplied.\u003c\/p\u003e\n\u003ch3\u003eA written quote for your project\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate. We will also walk you through the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stelpro","offers":[{"title":"Default Title","offer_id":67801703219492,"sku":"SFECM2321","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_STELPRO_SFECM_SFECM2321_00_22_5_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082501"}],"url":"https:\/\/airgreen.ca\/en\/collections\/fournaise-electrique-a-elements-stelpro-installation-a-montreal-laval-longueuil-rive-sud-et-rive-nord.oembed","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}