{"title":"CONFORTO Electric Furnace | Installation in Montreal, Laval, Longueuil, South Shore and North Shore","description":null,"products":[{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g010-03-10-kw-240v","title":"CONFORTO Hiboy KHE-02-G010-03 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003eTwo 5 kW stages on a 60 A circuit: central electric heat in a compact package\u003c\/h2\u003e\n\u003ch3\u003eWho it suits: small houses, condos and units with ductwork\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G010-03 is the smallest 2nd-generation Hiboy electric furnace. It produces 10 kW, or 34,140 BTU\/h at 240 V, and splits that heat into two 5 kW stages. Its 1\/3 HP three-speed PSC motor pushes air through existing ductwork. It is mostly found in well-insulated bungalows, condos with ducts and units in a plex, where heating needs stay modest.\u003c\/p\u003e\n\u003cp\u003eThe Hiboy cabinet is multiposition. It stands upright in a mechanical closet, runs in downflow or lies on its right side, with a 20 x 21 in footprint. That flexibility helps a great deal when replacing an old furnace in a space that was never designed for a modern unit.\u003c\/p\u003e\n\u003ch3\u003eA unit that is easy on your electrical panel\u003c\/h3\u003e\n\u003cp\u003eIn many homes in \u003cstrong\u003eMontreal\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, the question is not only heat, but how much room is left in the panel. Conforto lists a 60 A minimum circuit ampacity for this model, a breaker of no more than 60 A and 4 AWG wire. It is the smallest circuit in the series, and that is often what makes central electric heat possible without upgrading the service.\u003c\/p\u003e\n\u003cp\u003eThe ComfortMax function analyzes each cycle and modulates the elements: fewer short cycles and a steadier temperature. With a single-stage thermostat, it decides when to bring in the second element.\u003c\/p\u003e\n\u003ch3\u003eCooling, now or later\u003c\/h3\u003e\n\u003cp\u003eThe furnace accepts a central air conditioner or heat pump coil of up to 3 tons, on the supply plenum or the return. DIP switch 3 tells the control where it is. With a heat pump, the elements become the backup heat, and the control turns one or more of them on during defrost so the supply air stays comfortable. Note that a furnace sold alone is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation, step by step\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFree on-site estimate: heating needs, ductwork and panel capacity\u003c\/li\u003e\n\u003cli\u003eWritten quote specifying the furnace, the circuit and the planned work\u003c\/li\u003e\n\u003cli\u003eInstallation in the position that suits your space, connection to the plenums\u003c\/li\u003e\n\u003cli\u003eDedicated 240 V circuit, thermostat hookup and motor speed setting\u003c\/li\u003e\n\u003cli\u003eCommissioning, temperature rise check and installation of the supplied 20 x 20 x 1 in filter\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor simple, well-sized central electric heat, ask for your free estimate. You receive a clear written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the cost of the project.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801418465572,"sku":"KHE-02-G010-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G010_03_00_10_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g010-03-10-kw-240v","title":"CONFORTO Lowboy KLE-02-G010-03 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003eA 10 kW electric Lowboy whose every dimension you know before installation day\u003c\/h2\u003e\n\u003ch3\u003eWhat it is, and who it suits\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KLE-02-G010-03 is an electric element furnace in the Lowboy format, the low version of the line, installed in upflow. It produces 10 kW, or 34,140 BTU\/h at 240 V, in two 5 kW stages, and a 1\/3 HP three-speed PSC motor distributes the warm air through the ducts.\u003c\/p\u003e\n\u003cp\u003eIt suits homeowners replacing an old Lowboy furnace first and foremost, where the ducts were laid out for that format: a bungalow in \u003cstrong\u003eLaval\u003c\/strong\u003e, a semi-detached house on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, a unit in a plex. Its electrical needs are the lightest in the series, which often simplifies the connection to the existing panel.\u003c\/p\u003e\n\u003ch3\u003ePlanning the space without surprises\u003c\/h3\u003e\n\u003cp\u003eConforto publishes all three cabinet dimensions: 21 1\/2 in wide, 44 in deep and 34 1\/2 in high. The Lowboy therefore takes more floor space than a Hiboy, while staying low. Before ordering, we measure the location, the access and the service clearance required by the manual. The furnace weighs 110 lb (50 kg) shipped, a weight we plan for when handling it on the stairs.\u003c\/p\u003e\n\u003cp\u003eThe warm air plenum is 20 x 20 in and the return opening 18 1\/2 x 18 1\/2 in. Existing connections are adapted with transitions where needed, which we confirm on site.\u003c\/p\u003e\n\u003ch3\u003eWith a heat pump, it becomes the backup heat\u003c\/h3\u003e\n\u003cp\u003eIf you plan to add a central heat pump in a few years, this model lends itself to that: it accepts an air conditioner or heat pump coil of up to 3 tons, on the supply plenum or the return according to the DIP switch 3 setting. In heat pump mode, the elements take over in severe cold and during defrost. The QuietComfort function preheats recirculated air at low energy to smooth the step from one stage to the next.\u003c\/p\u003e\n\u003cp\u003eA useful point: sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eWhat we do, from quote to commissioning\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, with RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree estimate and measurement of the location, then a written quote\u003c\/li\u003e\n\u003cli\u003eUpflow installation and connection to the existing ductwork\u003c\/li\u003e\n\u003cli\u003eDedicated 240 V circuit and thermostat hookup\u003c\/li\u003e\n\u003cli\u003eMotor speed setting, temperature rise check and installation of the supplied filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTell us about your basement and your cooling plans: the estimate is free, the quote is in writing, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801422004516,"sku":"KLE-02-G010-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G010_03_00_10_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-01-g010-h3-10-kw-240v","title":"CONFORTO Lowboy KLE-01-G010-H3 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003eA 10 kW Lowboy electric furnace to replace a unit of the same format\u003c\/h2\u003e\n\u003ch3\u003eThe Lowboy format, to keep your duct layout\u003c\/h3\u003e\n\u003cp\u003eWhen a house was fitted with a Lowboy furnace, the supply and return ducts were laid out for that format, and switching formats can mean modifying part of the ductwork. The Conforto KLE-01-G010-H3 avoids that detour: it is an electric element furnace in the upflow Lowboy format, 34 1\/2 in high and 21 1\/2 in wide. Its 20 x 20 in warm air plenum connects to the existing ductwork.\u003c\/p\u003e\n\u003cp\u003eIt delivers 10 kW at 240 V, in two 5 kW stages, and moves air with a 1\/2 HP Ecotech ECM motor with five speeds. At the factory, the heating speed is set to M-LOW for 0.5 in of water column; we adjust it as needed for your ducts.\u003c\/p\u003e\n\u003ch3\u003eA first-generation code: what it means for you\u003c\/h3\u003e\n\u003cp\u003eThe KLE-01 code refers to the first generation of Conforto’s Lowboy line, while the manufacturer’s current documentation covers the 2nd generation (KLE-02). In practice, we confirm with you the exact data sheet for this code, its availability and the dimensions that are not on the basic sheet, such as cabinet depth, before placing the order. It is the model to choose if you are replacing a KLE-01 like for like or if the space was designed around one.\u003c\/p\u003e\n\u003ch3\u003eElectrical and cooling: the figures to know\u003c\/h3\u003e\n\u003cp\u003eConforto’s manual calls for a dedicated 240 V single-phase circuit with a 60 A minimum circuit ampacity, a breaker of no more than 60 A and 4 AWG wire. The listed total amperage is 44 A. During the estimate, we look at the free space in the panel before making any recommendation.\u003c\/p\u003e\n\u003cp\u003eThe furnace can take central air conditioning with a maximum capacity of 3 tons. If summer heat bothers you, mention it from the start: the coil is planned together with the furnace. An electric furnace sold alone, however, is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation, and what follows\u003c\/h3\u003e\n\u003cp\u003eA family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. One crew therefore handles the ducts, the circuit and the commissioning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree on-site estimate and written quote\u003c\/li\u003e\n\u003cli\u003eVerification of the KLE-01 code, dimensions and availability before ordering\u003c\/li\u003e\n\u003cli\u003eConnection to the existing warm air plenum and return\u003c\/li\u003e\n\u003cli\u003e240 V circuit, thermostat hookup and ECM motor setting\u003c\/li\u003e\n\u003cli\u003eCommissioning and installation of the 20 x 20 x 1 in disposable filter supplied by Conforto\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Lowboy furnace is near the end of its life: ask for a free estimate. We give you a written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801428820260,"sku":"KLE-01-G010-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_KHE01_KLE01_KLE_01_G010_H3_00_10_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-01-g010-h3-10-kw-240v","title":"CONFORTO Hiboy KHE-01-G010-H3 Electric Furnace | 10 kW - 240V","description":"\u003ch2\u003eA 10 kW Hiboy electric furnace with an ECM motor, in a 20 x 21 in cabinet\u003c\/h2\u003e\n\u003ch3\u003eA first-generation furnace, for a well-targeted replacement\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-01-G010-H3 is an electric element furnace in the Hiboy format: a tall, multiposition cabinet that heats air and pushes it through your ductwork. It delivers 10 kW at 240 V and moves air with a 1\/2 HP Ecotech ECM motor with five speeds. The KHE-01 code belongs to the first generation of the line. Today, Conforto mainly publishes documentation for the 2nd generation, the KHE-02 models.\u003c\/p\u003e\n\u003cp\u003eThis furnace is therefore aimed first at homeowners and contractors replacing an identical unit, or who want an ECM motor in the smallest size of the series. Before offering it to you, we check the exact code and the data sheet that goes with it. The step is simple, and it avoids an unpleasant surprise on connection day.\u003c\/p\u003e\n\u003ch3\u003eIn a Québec home: what to look at\u003c\/h3\u003e\n\u003cp\u003eA 10 kW furnace targets modest heating needs. The right size, however, is determined on site, not from a rule of thumb: we look at insulation, windows and the condition of the ductwork before recommending an output. If the house needs more, the same series comes in larger sizes, and we will tell you so plainly.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, Conforto lists a total amperage of 44 A at 240 V, single phase. Breaker and wire sizes are confirmed from the manual for this code and the rating plate; we validate them before touching the panel. The cabinet measures 20 in wide by 21 in deep and weighs 105 lb (48 kg) shipped, which is manageable on a basement staircase.\u003c\/p\u003e\n\u003cp\u003eThe furnace can also take central air conditioning with a maximum capacity of 3 tons. If you plan to add cooling later, tell us at the estimate: room for the coil is planned at installation. Finally, an electric furnace sold alone is not a heat pump, so it does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work. We therefore handle the duct connections as well as the electrical hookup, without bringing in extra trades.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree on-site estimate, then a detailed written quote\u003c\/li\u003e\n\u003cli\u003eVerification of the KHE-01 code and its documentation before ordering\u003c\/li\u003e\n\u003cli\u003eConnection of the furnace to the existing supply and return plenums\u003c\/li\u003e\n\u003cli\u003e240 V hookup and motor speed setting to suit your ductwork\u003c\/li\u003e\n\u003cli\u003eInstallation of the supplied filter, commissioning and maintenance pointers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur crews work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your project\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are replacing a Hiboy furnace or planning central electric heat, ask for your free in-home estimate. We confirm the right model, give you a written quote, and you can spread the payments with the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e AirGreen offers.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801429115172,"sku":"KHE-01-G010-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_KHE01_KLE01_KHE_01_G010_H3_00_10_KW_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g015-03-15-kw-240v","title":"CONFORTO Hiboy KHE-02-G015-03 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003e15 kW in three elements: a Hiboy furnace that heats in two steps\u003c\/h2\u003e\n\u003ch3\u003eA furnace designed for the mid-size house\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G015-03 is a 2nd-generation electric element furnace in the multiposition Hiboy format. It produces 15 kW, or 51,216 BTU\/h at 240 V, with three 5 kW elements. A 1\/3 HP three-speed PSC motor pushes the warm air through the ducts. It is aimed mainly at a single-family or semi-detached house that already has ductwork, when the on-site calculation shows that a 10 kW furnace would be too tight.\u003c\/p\u003e\n\u003cp\u003eHeating happens in two stages. The first delivers 10 kW; the second brings the furnace to 15 kW when demand rises. With a 2-stage thermostat, each stage has its own terminal (W1, W2). With a single-stage thermostat, the ComfortMax function analyzes each cycle and decides when to bring in the second stage, which limits short cycles and steadies the temperature.\u003c\/p\u003e\n\u003ch3\u003eThe point to check: your electrical service\u003c\/h3\u003e\n\u003cp\u003eA 15 kW furnace needs a heavier circuit than people expect. Conforto lists an 85 A minimum circuit ampacity, a breaker of no more than 90 A and 4 AWG wire, on a 240 V single-phase supply. Before recommending this model, we look at your panel and your electrical service: the space available, the load already in place and what adding air conditioning would require. If an upgrade is needed, it appears clearly in the written quote.\u003c\/p\u003e\n\u003ch3\u003eWhere to put it in the house\u003c\/h3\u003e\n\u003cp\u003eThe multiposition cabinet is 20 in wide by 21 in deep. In a basement, it is most often installed upright, in upflow. In a main-floor closet feeding ducts in the basement, downflow is allowed, with a non-combustible base if the floor is combustible. It can also lie down, on the right side only: the manual prohibits the left side and installation on the front or back.\u003c\/p\u003e\n\u003cp\u003eIf air conditioning is part of your plans, the furnace accepts an air conditioner or heat pump coil of up to 3 tons. Remember that a furnace sold alone is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. With our RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work, we handle the duct connections, the 240 V circuit, the thermostat hookup and the commissioning. We set the motor speed so the temperature rise stays within the 45 to 60 °F range published by Conforto, then install the supplied 20 x 20 x 1 in filter.\u003c\/p\u003e\n\u003cp\u003eOur technicians travel to \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate: we assess the house and the panel, give you a written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801434816804,"sku":"KHE-02-G015-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G015_03_00_15_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g015-03-15-kw-240v","title":"CONFORTO Lowboy KLE-02-G015-03 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003eA 15 kW Lowboy furnace, protected against power surges and brownouts\u003c\/h2\u003e\n\u003ch3\u003eReplacing a Lowboy, in a 15 kW version\u003c\/h3\u003e\n\u003cp\u003eWhen a Lowboy furnace reaches the end of its life, the simplest route is often to replace it with a unit of the same upflow format, connected to the same ducts. The Conforto KLE-02-G015-03 fills that role for homes that need more than a 10 kW model. It produces 15 kW, or 51,216 BTU\/h at 240 V, with three 5 kW elements: the first stage brings in 10 kW, the second raises output to 15 kW. A 1\/3 HP three-speed PSC motor distributes the air.\u003c\/p\u003e\n\u003cp\u003eIt is found in single-family houses, but also in plex units in \u003cstrong\u003eMontreal\u003c\/strong\u003e where each unit has its own furnace and its own ductwork.\u003c\/p\u003e\n\u003ch3\u003eWhat protects the unit and eases service\u003c\/h3\u003e\n\u003cp\u003eThe 2nd generation of Conforto furnaces focuses on a sturdy electrical section. The elements are staged and controlled by heavy-duty relays. Redundant high limits watch the temperature, and the control board includes surge and brownout protection, with a replaceable fuse. If something goes wrong, LED diagnostics tell the technician where to start, and the programmable DIP switches let the operation be adapted to the installation.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is fully insulated, and the 24 VAC connection accepts accessories such as a central humidifier.\u003c\/p\u003e\n\u003ch3\u003eWhat to plan at the panel and on the floor\u003c\/h3\u003e\n\u003cp\u003eConforto calls for a dedicated 240 V single-phase circuit with an 85 A minimum circuit ampacity, a breaker of no more than 90 A and 4 AWG wire. On the floor, the cabinet takes 21 1\/2 in of width by 44 in of depth, for 34 1\/2 in of height, and it installs in upflow only. We check both points, the panel and the space, during the estimate.\u003c\/p\u003e\n\u003cp\u003eFor summer, the furnace accepts an air conditioner or heat pump coil of up to 3 tons, set through DIP switch 3. Sold alone, it is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eA complete installation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We set the furnace, connect it to the ducts, run the 240 V circuit and hook up the thermostat. At commissioning, we measure the temperature rise, which Conforto puts between 45 and 60 °F for this model, and set the motor speed accordingly.\u003c\/p\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo replace your Lowboy with a unit of the same format, ask for a free estimate: a written quote, clear work, and \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e offered by AirGreen to spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801435734308,"sku":"KLE-02-G015-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G015_03_00_15_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g015-h3-15-kw-240v","title":"CONFORTO Lowboy KLE-02-G015-H3 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003eA 15 kW Lowboy with an ECM motor, for airflow tuned to your home\u003c\/h2\u003e\n\u003ch3\u003eWho it suits: homes with a Lowboy, and people who care about comfort\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KLE-02-G015-H3 is an electric element furnace in the Lowboy format, installed in upflow, in a cabinet of 21 1\/2 x 44 in and 34 1\/2 in high. It produces 15 kW, or 51,216 BTU\/h at 240 V, with three 5 kW elements in two stages: 10 kW, then 15 kW. It replaces a furnace of the same format in a house whose ducts were laid out for a Lowboy.\u003c\/p\u003e\n\u003cp\u003eWhat sets it apart is its 1\/2 HP Ecotech ECM motor with five speeds. For a family that spends its evenings in a finished basement, or for ductwork with unusual pressure, this motor gives more room to set the total airflow.\u003c\/p\u003e\n\u003ch3\u003eFive speeds: what it changes in practice\u003c\/h3\u003e\n\u003cp\u003eConforto publishes a complete airflow table. At 0.5 in of water column, MED-LOW speed gives 600 CFM, MEDIUM 825, MED-HIGH 975 and HIGH 1,200 CFM. At the factory, the heating speed is set to M-LOW. At commissioning, we measure the actual pressure in your ducts and choose the right speed, rather than leaving the default setting.\u003c\/p\u003e\n\u003cp\u003eThe QuietComfort function preheats recirculated air at low energy to even out the step from one stage to the next, and ComfortMax modulates the elements to limit short cycles. A 24 VAC output also allows a central humidifier to be connected, useful when dry winter air makes itself felt in \u003cstrong\u003eLaval\u003c\/strong\u003e as on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eReady for summer and for a heat pump\u003c\/h3\u003e\n\u003cp\u003eThe furnace accepts an air conditioner or heat pump coil of up to 3 tons, on the supply plenum or the return according to the DIP switch 3 setting. With a heat pump, the elements become the backup and come on during defrost. Sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, Conforto calls for a 240 V single-phase circuit with an 85 A minimum circuit ampacity, a breaker of no more than 90 A and 4 AWG wire.\u003c\/p\u003e\n\u003ch3\u003eOur installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, with RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree on-site estimate and written quote\u003c\/li\u003e\n\u003cli\u003eUpflow installation, duct connection and 240 V circuit\u003c\/li\u003e\n\u003cli\u003eThermostat, humidifier where applicable, and ECM speed setting\u003c\/li\u003e\n\u003cli\u003eCommissioning and installation of the supplied 20 x 20 x 1 in disposable filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor a Lowboy that heats well and moves air just right, ask for your free estimate. Written quote, and \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e offered by AirGreen to spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801443762468,"sku":"KLE-02-G015-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G015_H3_00_15_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g015-h3-15-kw-240v","title":"CONFORTO Hiboy KHE-02-G015-H3 Electric Furnace | 15 kW - 240V","description":"\u003ch2\u003e15 kW and a five-speed ECM motor: the Hiboy that gets ready for a heat pump\u003c\/h2\u003e\n\u003ch3\u003eAn electric furnace designed to work with cooling\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G015-H3 produces 15 kW, or 51,216 BTU\/h at 240 V, with three 5 kW elements split into two stages: 10 kW on the first, 15 kW on the second. What sets it apart is its 1\/2 HP Ecotech ECM motor with five speeds. Conforto publishes airflow from 600 CFM at MED-LOW speed, at 0.5 in of water column, up to 1,275 CFM at HIGH speed, at 0.2 in. That range lets the airflow be matched to the ductwork, then to the coil of an air conditioner or heat pump.\u003c\/p\u003e\n\u003cp\u003eIt is aimed at owners of a house with ductwork who want central electric heat today and a central heat pump now or in a few years.\u003c\/p\u003e\n\u003ch3\u003eWith a central heat pump, who does what\u003c\/h3\u003e\n\u003cp\u003eThe furnace accepts an air conditioner or heat pump coil of up to 3 tons, on the supply plenum or the return. DIP switch 3 tells the control where it is. Once the heat pump is in place, it carries most of the heating and the elements become the backup. During defrost, the control turns on one or more elements according to the chosen setting.\u003c\/p\u003e\n\u003cp\u003eFor the thermostat, the manual calls for a 1 or 2 stage heating and cooling model, 24 VAC, and Conforto lists the furnace as compatible with smart thermostats. One point to keep in mind: sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant. Eligibility of a central heat pump is checked separately, based on the model chosen.\u003c\/p\u003e\n\u003ch3\u003eElectrical and location\u003c\/h3\u003e\n\u003cp\u003eConforto calls for a 240 V single-phase circuit with an 85 A minimum circuit ampacity, a breaker of no more than 90 A and 4 AWG wire. In a house in \u003cstrong\u003eLongueuil\u003c\/strong\u003e or \u003cstrong\u003eLaval\u003c\/strong\u003e whose panel already feeds a range, a dryer and a water heater, this check happens before any order.\u003c\/p\u003e\n\u003cp\u003eThe 20 x 21 in Hiboy cabinet is multiposition: upright, downflow (with a non-combustible base on a combustible floor) or lying on its right side only.\u003c\/p\u003e\n\u003ch3\u003eOur installation, from estimate to commissioning\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the furnace, its circuit and any coil are handled by the same team.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree on-site estimate and written quote\u003c\/li\u003e\n\u003cli\u003eInstallation in the right position, connection to the plenums\u003c\/li\u003e\n\u003cli\u003e240 V circuit, thermostat and DIP switch 3 setting\u003c\/li\u003e\n\u003cli\u003eECM motor speed selected from the pressure measured in your ducts\u003c\/li\u003e\n\u003cli\u003eCommissioning and installation of the supplied 20 x 20 x 1 in filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are planning a central heat pump or new electric heat, ask for a free estimate. You receive a written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801449726244,"sku":"KHE-02-G015-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G015_H3_00_15_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g018-03-18-kw-240v","title":"CONFORTO Hiboy KHE-02-G018-03 Electric Furnace | 18 kW - 240V","description":"\u003ch2\u003e18 kW in four elements: a Hiboy for homes that need more heat\u003c\/h2\u003e\n\u003ch3\u003eWhat it is, and for which homes\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G018-03 is a 2nd-generation electric element furnace in the multiposition Hiboy format. With 18 kW, or 61,460 BTU\/h at 240 V, it targets two-storey houses, cottages and older homes whose heating calculation exceeds what a 15 kW model covers. A 1\/3 HP three-speed PSC motor distributes the warm air through the ductwork.\u003c\/p\u003e\n\u003cp\u003eDespite its output, it keeps the same 20 x 21 in cabinet as the smaller sizes in the series, which makes replacing an old furnace in an existing mechanical space easier.\u003c\/p\u003e\n\u003ch3\u003eFour elements, two stages: 9 kW, then 18 kW\u003c\/h3\u003e\n\u003cp\u003eIts 5, 4, 5 and 4 kW elements are split into two stages. The first brings in 9 kW; the second adds the other two elements to reach 18 kW. The thermostat can be two-stage, in which case it controls each group of elements directly, or single-stage: then ComfortMax judges, cycle after cycle, whether to call on the full 18 kW, while avoiding short cycles. The temperature rise published by Conforto runs from 55 to 75 °F.\u003c\/p\u003e\n\u003ch3\u003eA 100 A circuit: the question to settle first\u003c\/h3\u003e\n\u003cp\u003eAt this output, electricity comes before everything else. Conforto calls for a 100 A minimum circuit ampacity, a breaker of no more than 100 A and 3 AWG wire. In a home on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e or in \u003cstrong\u003eLongueuil\u003c\/strong\u003e that already has an electric range, dryer and water heater, we work out the load before recommending this model. If the electrical service needs to be increased, the written quote says so clearly, with no surprises during the job.\u003c\/p\u003e\n\u003cp\u003eFor summer, the furnace accepts an air conditioner or heat pump coil of up to 3 tons. If the house needs more cooling, we will tell you and propose another approach. Reminder: sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eWhat our installation includes\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree estimate: heating needs, ductwork condition, electrical load review\u003c\/li\u003e\n\u003cli\u003eWritten quote, including any electrical upgrade required\u003c\/li\u003e\n\u003cli\u003eUpright, downflow or right-side horizontal installation, depending on the space\u003c\/li\u003e\n\u003cli\u003e240 V circuit in 3 AWG wire, thermostat and commissioning\u003c\/li\u003e\n\u003cli\u003eTemperature rise check and installation of the supplied 20 x 20 x 1 in filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo find out whether 18 kW is the right size and whether your panel can keep up, book a free estimate. The written quote follows, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801453003044,"sku":"KHE-02-G018-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G018_03_00_18_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g018-03-18-kw-240v","title":"CONFORTO Lowboy KLE-02-G018-03 Electric Furnace | 18 kW - 240V","description":"\u003ch2\u003eAn 18 kW electric Lowboy for larger homes built around this format\u003c\/h2\u003e\n\u003ch3\u003eWhy a Lowboy, and why 18 kW\u003c\/h3\u003e\n\u003cp\u003eIn a large bungalow or cottage built with a Lowboy furnace in the basement, the supply and return ducts were designed for that format. When it is time to replace it, keeping the same format limits changes to the ductwork. The Conforto KLE-02-G018-03 is the 18 kW version of this upflow Lowboy: 61,460 BTU\/h at 240 V, for a house that needs more heat than a 15 kW Lowboy can supply.\u003c\/p\u003e\n\u003cp\u003eA 1\/3 HP three-speed PSC motor pushes air through the ducts, with a published airflow of 1,100 CFM at HIGH speed, at 0.2 in of water column.\u003c\/p\u003e\n\u003ch3\u003eSteadier heat\u003c\/h3\u003e\n\u003cp\u003eIts four elements of 5, 4, 5 and 4 kW work in two stages. The first brings in 9 kW; the second raises output to 18 kW. The staged elements are controlled by heavy-duty relays, and the control board offers LED diagnostics. With a single-stage thermostat, the ComfortMax function analyzes each cycle and modulates the elements to avoid short cycles. The QuietComfort function preheats recirculated air at low energy to even out the step from one stage to the next. Conforto publishes a temperature rise of 55 to 75 °F, which we check at commissioning.\u003c\/p\u003e\n\u003ch3\u003eBefore installation: panel, floor and ducts\u003c\/h3\u003e\n\u003cp\u003eThree checks come before any order. First the panel: Conforto calls for a 100 A minimum circuit ampacity, a breaker of no more than 100 A and 3 AWG wire, at 240 V single phase. Then the floor: the cabinet takes 21 1\/2 x 44 in for 34 1\/2 in of height and installs in upflow only. Finally the ducts: the warm air plenum is 20 x 20 in and the return 18 1\/2 x 18 1\/2 in, and we plan the transitions needed.\u003c\/p\u003e\n\u003cp\u003eThe furnace also accepts an air conditioner or heat pump coil of up to 3 tons. Sold alone, it is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. With RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work, we handle the installation, the 240 V circuit, the thermostat and the commissioning; the written quote states what is planned for the old unit. We work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Lowboy is no longer enough: ask for a free estimate. We give you a detailed written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801453822244,"sku":"KLE-02-G018-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G018_03_00_18_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g018-h3-18-kw-240v","title":"CONFORTO Lowboy KLE-02-G018-H3 Electric Furnace | 18 kW - 240V","description":"\u003ch2\u003eAn 18 kW Lowboy with an ECM motor, ready for air conditioning\u003c\/h2\u003e\n\u003ch3\u003eFirst, a solid electric furnace\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KLE-02-G018-H3 is an electric element furnace in the Lowboy format, installed in upflow. It produces 18 kW, or 61,460 BTU\/h at 240 V, with four elements of 5, 4, 5 and 4 kW split into two stages: 9 kW, then 18 kW. It replaces a Lowboy of the same format in a house with high heating needs whose ducts were laid out for this type of unit.\u003c\/p\u003e\n\u003cp\u003eIts 1\/2 HP Ecotech ECM motor offers five speeds. That is what makes this furnace a good base for a cooling project: its five speeds leave room to set the airflow.\u003c\/p\u003e\n\u003ch3\u003eAdding cooling to a house heated by a Lowboy\u003c\/h3\u003e\n\u003cp\u003eYou want to cool a house in \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e or on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e that is already heated by forced air: with this furnace, the coil goes on the supply plenum or the return, and DIP switch 3 tells the control where it is. Its capacity must not exceed 3 tons. The thermostat can be 1 or 2 stage for cooling (terminals Y1 and Y2).\u003c\/p\u003e\n\u003cp\u003eConforto publishes 1,275 CFM at HIGH speed, at 0.2 in of water column, and 1,200 CFM at 0.5 in, with intermediate speeds to fine-tune it all. We choose the settings based on the pressure measured in your ducts and the coil selected.\u003c\/p\u003e\n\u003cp\u003eIf you choose a central heat pump rather than an air conditioner, the elements become the backup heat, and the control turns one or more of them on during defrost. The furnace sold alone is not a heat pump and does not qualify for the LogisVert grant; heat pump eligibility is checked separately, based on the model.\u003c\/p\u003e\n\u003ch3\u003eElectrical and space\u003c\/h3\u003e\n\u003cp\u003eConforto calls for a 240 V single-phase circuit with a 100 A minimum circuit ampacity, a breaker of no more than 100 A and 3 AWG wire. The cabinet takes 21 1\/2 x 44 in of floor space for 34 1\/2 in of height.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, we review your electrical service: air conditioning adds its own load to the panel, on top of the furnace. We also measure the location and the service clearance required by the manual, then check how the 20 x 20 in warm air plenum and the 18 1\/2 x 18 1\/2 in return connect to your ducts.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the furnace, its circuit and the coil are handled by the same team. We serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating and cooling in one project: ask for your free estimate. You receive a written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801459982628,"sku":"KLE-02-G018-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G018_H3_00_18_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g018-h3-18-kw-240v","title":"CONFORTO Hiboy KHE-02-G018-H3 Electric Furnace | 18 kW - 240V","description":"\u003ch2\u003e18 kW, an ECM motor and horizontal installation: a Hiboy that adapts to your space\u003c\/h2\u003e\n\u003ch3\u003eA lot of output in a small cabinet\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G018-H3 produces 18 kW, or 61,460 BTU\/h at 240 V, in a Hiboy cabinet of only 20 x 21 in, the same as the smallest sizes in the series. Its four elements of 5, 4, 5 and 4 kW are split into two stages: 9 kW on the first, 18 kW on the second. It is aimed at homes with high heating needs but limited mechanical space.\u003c\/p\u003e\n\u003cp\u003eThe 1\/2 HP Ecotech ECM motor, with five speeds, completes the picture. Conforto publishes an airflow of 600 CFM at MED-LOW speed, at 0.5 in of water column, and up to 1,275 CFM at HIGH speed, at 0.2 in. At the factory, the heating speed is set to MED; we confirm or change it after measuring the pressure in your ducts.\u003c\/p\u003e\n\u003ch3\u003eUpright, downflow or lying down\u003c\/h3\u003e\n\u003cp\u003eThat is the great advantage of the multiposition Hiboy format. In a basement, the furnace stands upright, in upflow. In a closet feeding ducts under the floor, it installs in downflow, with a non-combustible base if the floor is combustible. And when the height allows neither, it lies horizontally, on the right side only: the manual prohibits the left side as well as installation on the front or back. In every case, we leave the access needed for maintenance and for changing the 20 x 20 x 1 in filter.\u003c\/p\u003e\n\u003ch3\u003eElectrical, cooling and heat pump backup\u003c\/h3\u003e\n\u003cp\u003eAn 18 kW furnace needs a serious circuit: 100 A minimum circuit ampacity, a breaker of no more than 100 A and 3 AWG wire, according to Conforto. A review of the electrical service is part of our estimate.\u003c\/p\u003e\n\u003cp\u003eThe furnace accepts an air conditioner or heat pump coil of up to 3 tons, with DIP switch 3 set according to its location. With a heat pump, the elements become the backup and the control turns them on during defrost. Sold alone, it is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eA family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We choose the position with you, connect the plenums, run the 240 V circuit, hook up the thermostat and commission the furnace. Our crews cover \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour mechanical space is tight and your heating needs are high: ask for a free estimate. You receive a written quote, and AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801468305700,"sku":"KHE-02-G018-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G018_H3_00_18_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g020-03-20-kw-240v","title":"CONFORTO Hiboy KHE-02-G020-03 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003e20 kW in four 5 kW elements: the Hiboy for large heating needs\u003c\/h2\u003e\n\u003ch3\u003eFor which homes\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G020-03 produces 20 kW, or 68,288 BTU\/h at 240 V. It is a 2nd-generation electric element furnace in the multiposition Hiboy format, designed for large houses, cottages with a finished basement or older homes whose envelope lets more heat escape. The size, however, is decided by an on-site calculation, not by eye: the same series comes in 10, 15 and 18 kW, and if a smaller size is enough, that is the one we recommend.\u003c\/p\u003e\n\u003cp\u003eDespite its output, it fits in the same 20 x 21 in cabinet as the smallest sizes, which makes it easier to bring into an existing mechanical space.\u003c\/p\u003e\n\u003ch3\u003eTwo 10 kW stages and airflow set for heat\u003c\/h3\u003e\n\u003cp\u003eIts four 5 kW elements are split into two equal stages: 10 kW on the first, 20 kW on the second. With a single-stage thermostat, the ComfortMax function analyzes each cycle and modulates the elements to limit short cycles; QuietComfort preheats recirculated air at low energy to smooth the step from one stage to the next.\u003c\/p\u003e\n\u003cp\u003eA feature of this model: Conforto sets the 1\/3 HP PSC motor at the factory to HIGH speed for heating, at 0.5 in of water column, which corresponds to 950 CFM in the manufacturer’s table. The published temperature rise runs from 60 to 80 °F; we measure it at commissioning.\u003c\/p\u003e\n\u003ch3\u003eA 125 A circuit: to be validated first\u003c\/h3\u003e\n\u003cp\u003eThe circuit is what sets this model furthest apart from the smaller sizes. Conforto calls for a 110 A minimum circuit ampacity and allows a breaker of no more than 125 A, with 3 AWG wire; the unit’s total amperage is 91 A. In practice, the furnace alone takes a good share of a residential panel’s capacity. Before proposing it, we note the capacity of your service and the appliances already connected. If the margin is short, there are two routes: increase the electrical service, or step down in size if the heating calculation allows it. The written quote sets out the option chosen.\u003c\/p\u003e\n\u003cp\u003eThe furnace also accepts an air conditioner or heat pump coil of up to 3 tons. Sold alone, it is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. On installation day, the same crew sets the furnace in the chosen position, connects it to the plenums, runs the 240 V circuit and hooks up the thermostat. Commissioning ends with a temperature rise measurement, expected between 60 and 80 °F according to Conforto, and the installation of the supplied 20 x 20 x 1 in filter.\u003c\/p\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour house needs a lot of heat: ask for a free estimate to confirm the right size. Written quote, and \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e offered by AirGreen to spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801478398244,"sku":"KHE-02-G020-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G020_03_00_20_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g020-03-20-kw-240v","title":"CONFORTO Lowboy KLE-02-G020-03 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003eA 20 kW low-profile furnace that replaces the old one without turning the basement upside down\u003c\/h2\u003e\n\u003ch3\u003eWho the Conforto KLE-02-G020-03 is for\u003c\/h3\u003e\n\u003cp\u003eMany homes in the area still have a low-profile Lowboy furnace that was installed in the basement a long time ago. When it is time to replace it, the same question always comes back: will a new unit fit in the same space and connect to the same ducts? Conforto’s KLE-02-G020-03 was designed for exactly that situation. It is a 20 kW all-electric furnace, 34 1\/2 in high, that sends warm air upward, straight into the plenum.\u003c\/p\u003e\n\u003cp\u003eIt suits homeowners who want simple central heating, with no outdoor unit for now, while keeping the door open to air conditioning. Its 1\/3 HP PSC motor has three speeds, which we set to match your ductwork. Conforto builds it in Canada.\u003c\/p\u003e\n\u003ch3\u003eHow it fits a Québec home\u003c\/h3\u003e\n\u003cp\u003eIn the middle of winter, a furnace that starts at full power every cycle heats in bursts. Here, the four 5 kW elements are staged: a 10 kW first stage is enough on mild days, then full power takes over when the cold sets in. The ComfortMax control analyses each cycle and modulates the elements, while the QuietComfort function pre-warms recirculated air at low energy. According to Conforto, you get fewer short cycles and a steadier temperature from one room to the next.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is fully insulated and the control board combines redundant high limits, over-voltage and under-voltage protection, and LED diagnostics. A 24 VAC terminal lets you connect an accessory such as a central humidifier, a welcome addition when the air gets dry in January.\u003c\/p\u003e\n\u003cp\u003eThinking about air conditioning? The furnace accepts a central air conditioner or heat pump coil up to 3.0 tons, on either the supply or the return side. With a heat pump, the elements become the backup heat and also take over during defrost.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. A 20 kW furnace needs a serious circuit: Conforto requires a breaker of no more than 125 A and 3 AWG wire. That is why we start with a free on-site estimate to check the panel, the available space and the condition of the ducts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eremoval of the old furnace and placement of the KLE in upflow;\u003c\/li\u003e\n\u003cli\u003econnection to the plenum and the return air, adapted as needed;\u003c\/li\u003e\n\u003cli\u003eelectrical hookup and thermostat connection, 1 or 2 stage, smart if you wish;\u003c\/li\u003e\n\u003cli\u003eblower speed setting, temperature rise check and commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou receive a detailed written quote before work begins, with no surprises about what is included.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your project\u003c\/h3\u003e\n\u003cp\u003eOur crews travel to \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. Send us a photo of your current furnace and where it sits: it is often enough for a first idea of the work involved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate today and ask about our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options to spread the cost of your new furnace.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801483739428,"sku":"KLE-02-G020-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G020_03_00_20_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g020-h3-20-kw-240v","title":"CONFORTO Lowboy KLE-02-G020-H3 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003eA low-profile furnace ready for your future heat pump\u003c\/h2\u003e\n\u003ch3\u003eAn electric furnace designed for what comes next\u003c\/h3\u003e\n\u003cp\u003eYou need to replace your basement furnace this winter, but you are already thinking about a central heat pump for next summer? The Conforto KLE-02-G020-H3 fits that two-step plan. It heats the house today with 20 kW of electric elements, in a 34 1\/2 in high Lowboy format that sends air out through the top. The day the coil arrives, it is already equipped to receive it.\u003c\/p\u003e\n\u003cp\u003eIt is meant for families who want to do things in the right order: first reliable central heating, then air conditioning or a heat pump, without having to replace the furnace a second time.\u003c\/p\u003e\n\u003ch3\u003eThe ECM motor pays off when a coil is added\u003c\/h3\u003e\n\u003cp\u003eA heat pump or air conditioner coil needs a precise airflow. That is where the 1\/2 HP ECM (Ecotech) motor makes the difference: five speeds, and up to 1,275 CFM at 0.2 in. w.c. on HIGH. Conforto also publishes the airflow of the MED-HIGH, MEDIUM and MED-LOW speeds, so our technicians can pick the right speed for heating and for cooling, up to 3.0 tons.\u003c\/p\u003e\n\u003cp\u003eThe coil can go on the supply or the return side. A simple switch, DIP 3, tells the control where it is.\u003c\/p\u003e\n\u003ch3\u003eA Québec winter, with a heat pump and backup elements\u003c\/h3\u003e\n\u003cp\u003eWhen a central heat pump heats the house, the furnace does not disappear: its four 5 kW elements become the backup heat. During defrost cycles, the control turns one or more of them on so the rooms do not get cool air. Without a heat pump, it runs in two stages, with a 10 kW first stage.\u003c\/p\u003e\n\u003cp\u003eIt accepts a 1 or 2 stage 24 VAC thermostat, smart thermostats included, and a 24 VAC terminal powers an accessory such as a central humidifier. On the safety side, Conforto provides redundant high limits and over-voltage and under-voltage protection.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation, step by step\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work, the three trades this kind of project calls for.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFree on-site estimate: electrical panel, basement space, condition of the ducts.\u003c\/li\u003e\n\u003cli\u003eWritten quote, with or without the coil and outdoor unit, on your schedule.\u003c\/li\u003e\n\u003cli\u003eFurnace installed in upflow, connected to a circuit that meets Conforto’s requirements, thermostat wired.\u003c\/li\u003e\n\u003cli\u003eECM speed setting and commissioning; if the heat pump comes later, we come back to adjust the settings for the coil.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eYour project, at your pace\u003c\/h3\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. Tell us where you stand, urgent replacement or planned project, and we build the quote around it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate and ask us about \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options for the furnace, or for the furnace and heat pump together.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801538920740,"sku":"KLE-02-G020-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G020_H3_00_20_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-mhah-1-5-tonnes-18000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 1.5 Tons - 18000 BTU - R410A","description":"\u003ch2\u003eA small Conforto air handler you forget is there\u003c\/h2\u003e\n\u003ch3\u003eThe MHAH118DACFC in brief\u003c\/h3\u003e\n\u003cp\u003eThe MHAH118DACFC is the 1.5-ton (18,000 BTU\/h) size of Conforto’s MHAH series, presented in the manufacturer’s brochure on ducted central heat pump systems. It is the indoor part of the system: installed in a closet, the basement or a mechanical room, it pushes air through the ducts while the outdoor unit produces the heat or cooling.\u003c\/p\u003e\n\u003cp\u003eWhat stands out are its sound levels. Conforto publishes 34 dB at maximum speed, 31 dB at medium and 30 dB at minimum. Airflow reaches 576 CFM maximum, which suits a small duct system.\u003c\/p\u003e\n\u003ch3\u003eWhich homes it suits\u003c\/h3\u003e\n\u003cp\u003eThis size is aimed at small spaces: condos, apartments with ductwork, small well-insulated single-storey houses. In a \u003cstrong\u003eMontreal\u003c\/strong\u003e condo, where the air handler often sits in a closet near the bedrooms, a quiet unit makes a real difference at night. In a small \u003cstrong\u003eLongueuil\u003c\/strong\u003e bungalow, it makes it possible to move to a central heat pump while keeping the existing ducts, after checking their capacity.\u003c\/p\u003e\n\u003cp\u003eThe right size matters as much as noise. An air handler too large for the home blows hard, stops often and leaves the air humid in summer; that is why we calculate the real needs before confirming the 1.5-ton size.\u003c\/p\u003e\n\u003ch3\u003eBefore buying\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is 21.02 in wide, 17.52 in deep and 45.00 in high. It runs on 208\/230 V single phase, 60 Hz, and connects to the outdoor unit with a 3\/8 in liquid line and a 3\/4 in suction line.\u003c\/p\u003e\n\u003cp\u003eIt is sold alone: the outdoor unit is not included, and we confirm the matched Conforto outdoor unit before ordering. Sold alone, it does not qualify for the LogisVert grant, which follows the certified outdoor unit + air handler pair. No heater kit is listed for this model in the data we verified; if you want electric backup heat, we confirm the compatible option before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work. Our work includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe free on-site estimate and written quote;\u003c\/li\u003e\n\u003cli\u003echecking the ducts and return air;\u003c\/li\u003e\n\u003cli\u003einstalling the air handler and connecting it to the plenum;\u003c\/li\u003e\n\u003cli\u003erefrigerant piping, vacuum, condensate drain and electrical connection;\u003c\/li\u003e\n\u003cli\u003ecommissioning and a walkthrough of how to use the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eLaval\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and throughout Greater Montreal. In a condo, we take the syndicate’s rules on the outdoor unit into account.\u003c\/p\u003e\n\u003ch3\u003eA quiet, correctly sized system\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate: we confirm the size and the match, then you receive a written quote. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801540657444,"sku":"MHAH118DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH118DACFC_00_1_5_TONNES_18000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g020-h3-20-kw-240v","title":"CONFORTO Hiboy KHE-02-G020-H3 Electric Furnace | 20 kW - 240V","description":"\u003ch2\u003e20 kW, an ECM motor and a well-protected electrical section: a Hiboy made in Canada\u003c\/h2\u003e\n\u003ch3\u003eWhat it is, and who it suits\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G020-H3 is a 2nd-generation electric element furnace in the multiposition Hiboy format. It produces 20 kW, or 68,288 BTU\/h at 240 V, with four 5 kW elements split into two stages: 10 kW on the first, 20 kW on the second. It is aimed at large houses and older homes with high heating needs, once that need is confirmed by an on-site calculation.\u003c\/p\u003e\n\u003cp\u003eIt differs from the PSC version by its 1\/2 HP Ecotech ECM motor with five speeds. Conforto sets it at the factory to HIGH speed for heating; at 0.5 in of water column, the manufacturer’s table then gives 1,200 CFM, and up to 1,275 CFM at 0.2 in.\u003c\/p\u003e\n\u003ch3\u003eA well-protected electrical section\u003c\/h3\u003e\n\u003cp\u003eA furnace of this output draws a lot of current, and Conforto’s controls combine several safeguards: staged elements and heavy-duty relays, redundant high limits, surge and brownout protection, and a control board with a replaceable fuse. If something goes wrong, LED diagnostics guide the technician, and the programmable DIP switches adapt the operation to the installation. The cabinet is fully insulated, and Conforto states that its furnaces are made in Canada.\u003c\/p\u003e\n\u003cp\u003eFor everyday comfort, ComfortMax analyzes each cycle and modulates the elements to limit short cycles, while QuietComfort preheats recirculated air at low energy. A 24 VAC output accepts accessories such as a central humidifier, welcome during the dry winter months.\u003c\/p\u003e\n\u003ch3\u003eBefore installation\u003c\/h3\u003e\n\u003cp\u003eConforto calls for a 240 V single-phase circuit with a 110 A minimum circuit ampacity, a breaker of no more than 125 A and 3 AWG wire. In a home in \u003cstrong\u003eLongueuil\u003c\/strong\u003e or on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, we assess the electrical service before any recommendation. The 20 x 21 in cabinet installs upright, in downflow or horizontally on the right side, and accepts an air conditioner or heat pump coil of up to 3 tons. Sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant.\u003c\/p\u003e\n\u003ch3\u003eInstallation by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We handle the free estimate, the written quote, the installation, the 240 V circuit, the thermostat hookup and, where applicable, the humidifier, then the commissioning, in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor a high-output electric furnace installed by the book, ask for your free estimate. AirGreen’s \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e then lets you spread the payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801613992228,"sku":"KHE-02-G020-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G020_H3_00_20_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-mhah-2-tonnes-24000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 2 Tons - 24000 BTU - R410A","description":"\u003ch2\u003eConforto’s 2-ton air handler, for the bungalow with ductwork\u003c\/h2\u003e\n\u003ch3\u003eWhat the MHAH124DACFC does\u003c\/h3\u003e\n\u003cp\u003eIn a central system, the outdoor unit produces the heat or cooling, and the air handler distributes it. The MHAH124DACFC is that air handler in the 2-ton (24,000 BTU\/h) size of Conforto’s MHAH series. It belongs to the range presented in Conforto’s brochure on ducted central heat pump systems, and it pushes up to 758 CFM through the ductwork.\u003c\/p\u003e\n\u003ch3\u003eThe bungalow, natural territory of the 2-ton\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, the bungalow with a basement and original ducts is very common. Owners often want the same thing: cooling in summer, heat pump heating in winter, without redoing the whole system. The 2-ton size comes up regularly in our calculations for this type of house, and the MHAH124DACFC makes it possible while keeping the ducts, after checking their capacity.\u003c\/p\u003e\n\u003cp\u003eA useful detail: Conforto publishes exactly the same dimensions for this model as for the 1.5-ton size, namely 21.02 in wide, 17.52 in deep and 45.00 in high. If the final load calculation hesitates between the two sizes, the space to reserve stays the same.\u003c\/p\u003e\n\u003ch3\u003ePublished data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum airflow: 758 CFM.\u003c\/li\u003e\n\u003cli\u003eSound levels: 39, 36 and 33 dB at maximum, medium and minimum speed.\u003c\/li\u003e\n\u003cli\u003ePower supply: 208\/230 V single phase, 60 Hz.\u003c\/li\u003e\n\u003cli\u003eConnections: 3\/8 in liquid, 3\/4 in suction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 33 dB at minimum speed, the air handler stays quiet even near living areas, provided the grilles and ducts are properly sized.\u003c\/p\u003e\n\u003ch3\u003eConditions and installation\u003c\/h3\u003e\n\u003cp\u003eThree points before ordering. The outdoor unit is not part of the purchase: we choose the matching Conforto model with you. The LogisVert grant does not apply to an air handler bought alone; it covers the certified outdoor unit + air handler pair, and we check eligibility when the quote covers the complete system. Finally, our data mentions no heater kit for this model: if electric backup heat interests you, we validate the option with Conforto.\u003c\/p\u003e\n\u003cp\u003eA Montreal family business active for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work. We start with a free on-site estimate and a written quote. Then our technicians remove the old unit, install the air handler, connect it to the plenum, the refrigerant piping, the condensate drain and the electrical supply, pull a vacuum and commission the system. We work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and throughout Greater Montreal.\u003c\/p\u003e\n\u003ch3\u003eYour bungalow, cooled and heated through its ducts\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBook a free estimate: a technician examines your ducts and basement, then we send you a written quote for the complete system. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801626935588,"sku":"MHAH124DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH124DACFC_00_2_TONNES_24000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g027-h5-27-kw-240v","title":"CONFORTO Lowboy KLE-02-G027-H5 Electric Furnace | 27 kW - 240V","description":"\u003ch2\u003e27 kW of electric backup for a large central heat pump\u003c\/h2\u003e\n\u003ch3\u003eWho the Conforto KLE-02-G027-H5 is for\u003c\/h3\u003e\n\u003cp\u003eMore and more owners of large homes want to switch to a central heat pump without giving up reliable backup heat for the coldest nights. That is exactly the role of the KLE-02-G027-H5. This 27 kW Lowboy electric furnace, 34 1\/2 in high, heats the whole house on its own if needed, and accepts a heat pump or air conditioner coil up to 5.0 tons.\u003c\/p\u003e\n\u003cp\u003eIt also suits projects spread over time: the furnace goes in now, in the basement, and the coil and outdoor unit follow when the budget allows.\u003c\/p\u003e\n\u003ch3\u003eDesigned to work as a team with a heat pump\u003c\/h3\u003e\n\u003cp\u003eA high-capacity heat pump needs a steady, well-set airflow. The 12 x 10 in blower of this furnace is driven by a five-speed 3\/4 HP ECM (Ecotech) motor. On HIGH, Conforto publishes 1,575 CFM at 0.2 in. w.c. and 1,475 CFM at 0.5 in. w.c.; the lower speeds are used to adjust the airflow to the coil and the operating mode.\u003c\/p\u003e\n\u003cp\u003eWhen the heat pump is heating, the six elements move into the backup role. During defrost cycles, the control turns one or more of them on, depending on the DIP switch 3 setting. The coil can go on the supply or the return side. And when the furnace heats on its own, it starts with a 15 kW first stage before reaching the full 27 kW.\u003c\/p\u003e\n\u003ch3\u003eWhat to plan\u003c\/h3\u003e\n\u003cp\u003eA 27 kW furnace needs a solid electrical service. Conforto lists a 114 A total current, a breaker of no more than 150 A and 1 AWG wire. You also need a basement that allows an upflow installation, the only position allowed for the Lowboy. The furnace accepts a 1 or 2 stage 24 VAC thermostat, smart or not, and a 24 VAC terminal can power a central humidifier.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen does for you\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the furnace, the coil, the outdoor unit and the electrical hookup are handled by the same team. The estimate is free and done on site; we check the panel, the space and the ducts. You then receive a written quote that clearly separates the furnace and, where applicable, the heat pump. After installation, we set the ECM speed and commission the system.\u003c\/p\u003e\n\u003ch3\u003eLet’s start with a visit\u003c\/h3\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. Whether your project happens in one step or two, we plan it with you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate and ask about our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options for the furnace alone or for the complete system.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801649348900,"sku":"KLE-02-G027-H5","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G027_H5_00_27_KW_ECM_3_4_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g027-05-27-kw-240v","title":"CONFORTO Lowboy KLE-02-G027-05 Electric Furnace | 27 kW - 240V","description":"\u003ch2\u003eThe largest Conforto Lowboy, to heat and cool a large home\u003c\/h2\u003e\n\u003ch3\u003eA low-profile furnace built for big spaces\u003c\/h3\u003e\n\u003cp\u003eIn a large home, the furnace does more than heat: it also has to move a lot of air, through ductwork that is often long, and sometimes serve as the base for a large central air conditioning system. The Conforto KLE-02-G027-05 was designed for that role. At 27 kW, or 92,190 BTU\/h according to Conforto, it is the strongest Lowboy in the series, still in a 34 1\/2 in high cabinet that blows air out through the top.\u003c\/p\u003e\n\u003cp\u003eIt is mainly for homeowners replacing a low-profile furnace in a basement where a tall furnace would not fit, and whose home has high heating needs.\u003c\/p\u003e\n\u003ch3\u003eA blower sized for the house\u003c\/h3\u003e\n\u003cp\u003eWhat changes compared with the smaller sizes is the blower: a 12 x 10 in wheel driven by a four-speed 3\/4 HP PSC motor. On HIGH, Conforto publishes 1,775 CFM at 0.2 in. w.c. and 1,600 CFM at 0.5 in. w.c. That airflow allows a central air conditioner or heat pump coil up to 5.0 tons, on the supply or the return side.\u003c\/p\u003e\n\u003cp\u003eHeating, for its part, happens in stages. The six elements, three of 5 kW and three of 4 kW, do not all start at once: a 15 kW first stage covers most days, and the rest is added during cold snaps. ComfortMax modulates the elements every cycle and QuietComfort pre-warms recirculated air at low energy.\u003c\/p\u003e\n\u003ch3\u003eHow it fits your home\u003c\/h3\u003e\n\u003cp\u003eA furnace this size needs planning. Conforto requires a 240 V single-phase circuit with a 150 A minimum ampacity, a breaker of no more than 150 A and 1 AWG wire. In many homes, that is a large share of the electrical service capacity: it must be checked before choosing this size. On the safety side, the furnace has redundant high limits, over-voltage and under-voltage protection, and a fully insulated cabinet.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years. With our RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work, we handle the whole job:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003evisit and free estimate: heating needs, electrical service, ducts, basement space;\u003c\/li\u003e\n\u003cli\u003ewritten quote, with or without cooling;\u003c\/li\u003e\n\u003cli\u003ereplacement of the old furnace, connection to the ducts and electrical hookup;\u003c\/li\u003e\n\u003cli\u003e1 or 2 stage thermostat, blower speed selection and commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLet’s plan your project\u003c\/h3\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. The bigger the project, the more it pays to talk about it early.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate and find out about the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e available for your furnace and your cooling.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801663078692,"sku":"KLE-02-G027-05","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G027_05_00_27_KW_PSC_3_4_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g023-03-23-kw-240v","title":"CONFORTO Hiboy KHE-02-G023-03 Electric Furnace | 23 kW - 240V","description":"\u003ch2\u003e23 kW of electric heat that adapts to your space, not the other way around\u003c\/h2\u003e\n\u003ch3\u003eA multiposition Hiboy, for whom?\u003c\/h3\u003e\n\u003cp\u003eNot every furnace goes into a large, open basement. In a narrow mechanical room, a utility closet or a home where the ducts run under the floor, the position of the unit changes everything. The Conforto KHE-02-G023-03 was designed for those cases. It is a 23 kW Hiboy electric furnace, or 78,530 BTU\/h according to Conforto, that takes up only 20 in of width by 21 in of depth.\u003c\/p\u003e\n\u003cp\u003eIt appeals as much to the homeowner replacing a tall furnace as to the one reorganizing a mechanical room and wanting to win back space.\u003c\/p\u003e\n\u003ch3\u003eThree ways to install it\u003c\/h3\u003e\n\u003cp\u003eAccording to Conforto’s manual, the KHE accepts three positions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eupflow\u003c\/strong\u003e, the classic basement setup, with warm air leaving upward;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003edownflow\u003c\/strong\u003e, when the ductwork is below the unit, with a non-combustible base mandatory on a combustible floor;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ehorizontal on the right side\u003c\/strong\u003e, when the available height is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHorizontal on the left side and installation on the front or back are not allowed. We confirm the position during the visit, before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow it heats a home around here\u003c\/h3\u003e\n\u003cp\u003eThe five elements, rated 5 and 4 kW, come on in stages. A 15 kW first stage is enough most of the time, then the rest is added as demand rises. The ComfortMax control modulates the elements every cycle and QuietComfort pre-warms recirculated air at low energy. The 10 x 8 in blower, with a 1\/3 HP PSC motor, is factory set to HIGH for heating.\u003c\/p\u003e\n\u003cp\u003eIf you add a central air conditioner or heat pump one day, the furnace accepts a coil up to 3.0 tons, on the supply or the return side. With a heat pump, the elements become the backup and come on during defrost.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eA family business established in Montreal for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. After a free on-site estimate, you receive a written quote. On the day, we remove the old unit, install the KHE in the chosen position, adapt the duct connections, make the electrical hookup on a circuit that meets Conforto’s requirements (125 A, 2 AWG wire), connect the thermostat and commission everything.\u003c\/p\u003e\n\u003ch3\u003eTell us about your space\u003c\/h3\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. A photo of the current location and the ducts helps us point you in the right direction from the first call. If another format would be simpler to install in your home, we will tell you plainly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate and find out about \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e to spread the payment for your furnace.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801680314660,"sku":"KHE-02-G023-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G023_03_00_23_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g027-05-27-kw-240v","title":"CONFORTO Hiboy KHE-02-G027-05 Electric Furnace | 27 kW - 240V","description":"\u003ch2\u003e27 kW and 1,775 CFM in a 20 x 21 in cabinet\u003c\/h2\u003e\n\u003ch3\u003eLarge capacity, small footprint\u003c\/h3\u003e\n\u003cp\u003eA large home does not always have a large, open basement. Often, the furnace has to fit in a mechanical room shared with the water heater and the electrical panel, or in a utility closet. The Conforto KHE-02-G027-05 answers that constraint: 27 kW of heat, or 92,190 BTU\/h according to Conforto, in a Hiboy cabinet 20 in wide by 21 in deep.\u003c\/p\u003e\n\u003cp\u003eIt suits homeowners who need a lot of heat and strong airflow, but not a lot of floor space. It installs upflow, downflow or horizontal on the right side.\u003c\/p\u003e\n\u003ch3\u003eWhat the house gains\u003c\/h3\u003e\n\u003cp\u003eThe 12 x 10 in blower, driven by a four-speed 3\/4 HP PSC motor, moves up to 1,775 CFM at 0.2 in. w.c. on HIGH, and 1,600 CFM at 0.5 in. w.c. That is what allows the furnace to take a central air conditioner or heat pump coil up to 5.0 tons, on the supply or the return side. With a heat pump, the elements become the backup, and the control turns one or more of them on during defrost.\u003c\/p\u003e\n\u003cp\u003eHeating, for its part, stays gradual. Six elements, three of 5 kW and three of 4 kW, come on in stages: 15 kW in the first stage, then the rest as demand requires. ComfortMax modulates the elements every cycle, QuietComfort pre-warms recirculated air at low energy, and redundant high limits look after safety.\u003c\/p\u003e\n\u003ch3\u003eBefore choosing this size\u003c\/h3\u003e\n\u003cp\u003eTwo points are checked first. The electrical side: Conforto lists a 114 A total current, a breaker of no more than 150 A and 1 AWG wire, at 240 V single phase. Then the position: horizontal on the left side is not allowed, nor is placement on the front or back, and a non-combustible base is mandatory in downflow on a combustible floor.\u003c\/p\u003e\n\u003ch3\u003eAirGreen’s installation\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We start with a free on-site estimate, where we measure the space, look at the ducts and check the panel. You receive a written quote, then our team removes the old unit, installs the KHE in the chosen position, makes the electrical hookup and the connection of the 1 or 2 stage thermostat, sets the blower and commissions the system.\u003c\/p\u003e\n\u003ch3\u003eLet’s talk about your home\u003c\/h3\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. If you are torn between several sizes, we compare the options with you during the visit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate now and find out about \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e for your new furnace.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801682510116,"sku":"KHE-02-G027-05","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G027_05_00_27_KW_PSC_3_4_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-mhah-2-5-tonnes-30000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 2.5 Tons - 30000 BTU - R410A","description":"\u003ch2\u003e2.5 tons: the size for homes that fall in between\u003c\/h2\u003e\n\u003ch3\u003eBetween two sizes\u003c\/h3\u003e\n\u003cp\u003eA semi-detached house in \u003cstrong\u003eLongueuil\u003c\/strong\u003e, a renovated two-storey home in \u003cstrong\u003eLaval\u003c\/strong\u003e, a house that just got new windows: the load calculation often lands between 2 and 3 tons. Conforto’s MHAH130DACFC answers that case. It is the 2.5-ton (30,000 BTU\/h) air handler of the MHAH series, presented in Conforto’s brochure on ducted central heat pump systems, with a published maximum airflow of 894 CFM.\u003c\/p\u003e\n\u003cp\u003eThe right size has a direct effect on comfort. Too small, the system struggles in extreme cold or heat; too large, it keeps starting and stopping, leaves differences between rooms and removes humidity poorly. The in-between size avoids both pitfalls when the house calls for it.\u003c\/p\u003e\n\u003ch3\u003eA larger cabinet than the 2-ton\u003c\/h3\u003e\n\u003cp\u003eWith this size, the MHAH series changes footprint: the cabinet is 21.02 in wide, 21.02 in deep and 49.02 in high, a deeper square base and a taller unit than the 1.5 and 2-ton sizes. If you are replacing a smaller air handler, the location and plenum are checked before ordering. The same footprint is also used for the 3 and 4-ton sizes of the series.\u003c\/p\u003e\n\u003cp\u003eConforto publishes 42 dB at maximum speed, 40.5 dB at medium and 36.5 dB at minimum. The air handler runs on 208\/230 V single phase, 60 Hz, and connects to the outdoor unit with a 3\/8 in liquid line and a 3\/4 in suction line.\u003c\/p\u003e\n\u003ch3\u003eWhat is not included\u003c\/h3\u003e\n\u003cp\u003eThe MHAH130DACFC is sold without an outdoor unit; the matched Conforto model is confirmed with you before ordering. Sold alone, it does not qualify for the LogisVert grant, which follows the certified outdoor unit + air handler pair. No heater kit is listed for this model in the data we verified; for electric backup heat, we confirm the compatible option before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation, step by step\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFree on-site estimate and sizing calculation.\u003c\/li\u003e\n\u003cli\u003eWritten quote, matched outdoor unit included.\u003c\/li\u003e\n\u003cli\u003eInstalling the air handler, adapting the plenum and connecting the ducts.\u003c\/li\u003e\n\u003cli\u003eRefrigerant piping, vacuum, condensate drain and electrical connection.\u003c\/li\u003e\n\u003cli\u003eCommissioning and walkthrough.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWe install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and throughout Greater Montreal.\u003c\/p\u003e\n\u003ch3\u003eThe right size, calculated at your home\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate: we confirm whether your house needs 2, 2.5 or 3 tons, then you receive a written quote. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801682903332,"sku":"MHAH130DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH130DACFC_00_2_5_TONNES_30000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g023-03-23-kw-240v","title":"CONFORTO Lowboy KLE-02-G023-03 Electric Furnace | 23 kW - 240V","description":"\u003ch2\u003e23 kW in a low-profile format: more heat without changing the footprint\u003c\/h2\u003e\n\u003ch3\u003eWhen 20 kW is no longer enough\u003c\/h3\u003e\n\u003cp\u003eSome homes need more than a standard-size electric furnace: a house extended over the years, an added storey, or simply a large home where the basement does not have the height for a tall furnace. The Conforto KLE-02-G023-03 answers that exact case. It keeps the 34 1\/2 in high Lowboy format, with air leaving through the top, but goes up to 23 kW, or 78,530 BTU\/h according to Conforto.\u003c\/p\u003e\n\u003cp\u003eIt is a logical choice to replace a low-profile furnace that struggled to keep up during cold snaps, provided the home’s real needs justify it. We always check that point before recommending a size.\u003c\/p\u003e\n\u003ch3\u003eFive elements, two stages\u003c\/h3\u003e\n\u003cp\u003eMore output does not mean heat in bursts. The five elements, rated 5 and 4 kW, come on in stages: the first stage delivers 15 kW, and the rest is added only when the thermostat calls for it. The ComfortMax control analyses each cycle and modulates the elements, and QuietComfort pre-warms recirculated air at low energy to smooth the move from one stage to the next.\u003c\/p\u003e\n\u003cp\u003eThe 10 x 8 in blower, driven by a three-speed 1\/3 HP PSC motor, is factory set to HIGH for heating. Conforto publishes a 65 to 80 °F temperature rise for this model, a useful reference to confirm the setting at commissioning.\u003c\/p\u003e\n\u003ch3\u003eWhat to plan on the electrical side\u003c\/h3\u003e\n\u003cp\u003eA 23 kW furnace connects to a substantial 240 V circuit. Conforto lists a 125 A minimum circuit ampacity, a breaker of no more than 125 A and 2 AWG wire. In an older house, that is often the first thing to check, even before talking about ducts. If you also plan a central air conditioner or heat pump, the furnace accepts a coil up to 3.0 tons, on the supply or the return side.\u003c\/p\u003e\n\u003ch3\u003eHow we install\u003c\/h3\u003e\n\u003cp\u003eA family business established in Montreal for more than fifteen years, AirGreen holds RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. In practice, that means a single team handles the whole project:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eassessment of the heating needs and the electrical service, during a free on-site estimate;\u003c\/li\u003e\n\u003cli\u003ea written quote that spells out what is included;\u003c\/li\u003e\n\u003cli\u003eremoval of the old furnace, installation of the KLE in upflow and connection to the ducts;\u003c\/li\u003e\n\u003cli\u003eelectrical hookup, 1 or 2 stage thermostat, blower setting and commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGet your estimate\u003c\/h3\u003e\n\u003cp\u003eWe install electric furnaces in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. One call is enough to set up the visit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact us for a free estimate and see how \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e can spread the cost of your furnace into monthly payments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801687949604,"sku":"KLE-02-G023-03","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G023_03_00_23_KW_PSC_1_3_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-mhah-3-tonnes-36000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 3 Tons - 36000 BTU - R410A","description":"\u003ch2\u003eThree Conforto tons for a two-storey home that stays comfortable all year\u003c\/h2\u003e\n\u003ch3\u003eThe MHAH136DACFC in the system\u003c\/h3\u003e\n\u003cp\u003eA central heat pump has two parts: the outdoor unit, which produces heat in winter and cooling in summer, and the indoor cabinet, which distributes it through the house via the ducts. The MHAH136DACFC is that cabinet in the 3-ton (36,000 BTU\/h) size of the MHAH series, which Conforto presents in its brochure on ducted central heat pumps. The manufacturer publishes a maximum airflow of 1,082 CFM for it.\u003c\/p\u003e\n\u003ch3\u003eSummer and winter, the air has to reach everywhere\u003c\/h3\u003e\n\u003cp\u003eIn a two-storey home on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e or in \u003cstrong\u003eLaval\u003c\/strong\u003e, the challenge is familiar: the upper floor overheats in July, the basement stays cool in January. A well-chosen 3-ton size helps, but the real work happens in the ducts. The air handler’s airflow has to reach the bedrooms, and the air has to come back through adequate returns. That is what we check first during the estimate, before even talking about equipment.\u003c\/p\u003e\n\u003cp\u003eOn noise, Conforto publishes 45 dB at maximum speed, 43 dB at medium and 41 dB at minimum. Most of the time, a correctly sized system runs at the lower speeds, where it is quietest.\u003c\/p\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cp\u003eIn terms of footprint, allow for a 21.02 x 21.02 in base and 49.02 in of height. Power is 208\/230 V single phase, 60 Hz; the refrigerant connections are 3\/8 in for the liquid and 3\/4 in for the suction. Also plan room for the plenum and the service clearance the manufacturer requires.\u003c\/p\u003e\n\u003cp\u003eOn the purchase side, the MHAH136DACFC is sold without an outdoor unit, and the matched Conforto model is confirmed before ordering. Bought alone, it does not qualify for the LogisVert grant, which is reserved for the certified outdoor unit + air handler pair. Our data mentions no heater kit for this model; electric backup heat is therefore validated with the manufacturer before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow the installation goes\u003c\/h3\u003e\n\u003cp\u003eOur family business has been established in Montreal for more than fifteen years; its RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work. After the free on-site estimate, you receive a written quote that specifies the equipment and, if needed, the duct corrections. On installation day, our technicians remove the old unit, install the air handler, adapt the plenum, connect the refrigerant piping, the condensate drain and the electrical supply, pull a vacuum, then commission and balance the system with you. We work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and throughout Greater Montreal.\u003c\/p\u003e\n\u003ch3\u003eA pleasant upper floor, summer and winter\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate: we examine the upstairs ducts and give you a written quote for the complete system. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801694109988,"sku":"MHAH136DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH136DACFC_00_3_TONNES_36000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"},{"product_id":"fournaise-electrique-conforto-lowboy-kle-02-g023-h3-23-kw-240v","title":"CONFORTO Lowboy KLE-02-G023-H3 Electric Furnace | 23 kW - 240V","description":"\u003ch2\u003eEven heat throughout the house, with 23 kW and an ECM motor\u003c\/h2\u003e\n\u003ch3\u003eWhat the Conforto KLE-02-G023-H3 is\u003c\/h3\u003e\n\u003cp\u003eThis Lowboy electric furnace is installed in the basement and pushes warm air out through the top, straight into the plenum. It combines two things owners of larger homes often look for together: 23 kW of output spread over five elements, and a five-speed 1\/2 HP ECM (Ecotech) motor to set the airflow precisely.\u003c\/p\u003e\n\u003cp\u003eIt is a good fit for a family replacing an old low-profile furnace who wants to modernize the rest of the system at the same time: smart thermostat, central humidifier, air conditioning later.\u003c\/p\u003e\n\u003ch3\u003eComfort, day to day\u003c\/h3\u003e\n\u003cp\u003eWhat sets this furnace apart is the way it heats. The first stage starts at 15 kW, then the other elements are added as demand requires. The ComfortMax control analyses each cycle to modulate the elements, and QuietComfort pre-warms recirculated air at low energy. According to Conforto, the house sees fewer short cycles and a steadier temperature.\u003c\/p\u003e\n\u003cp\u003eThe ECM motor adds another layer of adjustment. Conforto publishes four airflow settings, from 1,275 CFM on HIGH to 600 CFM on MED-LOW depending on duct pressure. We choose the speed that suits your ducts instead of leaving a generic setting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 or 2 stage 24 VAC thermostat, smart or not;\u003c\/li\u003e\n\u003cli\u003e24 VAC connection for a central humidifier;\u003c\/li\u003e\n\u003cli\u003efully insulated cabinet, LED diagnostics and a control board with a replaceable fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn a home around here\u003c\/h3\u003e\n\u003cp\u003eOur winters test a furnace for months. Here, protection is doubled: redundant high limits, over-voltage and under-voltage protection. And if you add a central heat pump, the furnace accepts a coil up to 3.0 tons, on the supply or the return side. Its elements then become the backup heat, and the control turns one or more of them on during defrost.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years, with RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. The project starts with a free in-home estimate: we check that the panel can feed a 125 A circuit with 2 AWG wire, as Conforto requires, and that the space allows an upflow installation. You then receive a written quote. On installation day, we remove the old unit, connect the KLE to the ducts, make the electrical and thermostat connections, set the ECM speed and commission the system.\u003c\/p\u003e\n\u003ch3\u003eTake the first step\u003c\/h3\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. Tell us about your home and what you would like to improve this winter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate and use our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e to pay for your furnace in instalments.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801696043300,"sku":"KLE-02-G023-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_LOWBOY_KLE02_KLE_02_G023_H3_00_23_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082488"},{"product_id":"fournaise-electrique-conforto-hiboy-khe-02-g023-h3-23-kw-240v","title":"CONFORTO Hiboy KHE-02-G023-H3 Electric Furnace | 23 kW - 240V","description":"\u003ch2\u003eA 23 kW ECM Hiboy, the indoor heart of your future central system\u003c\/h2\u003e\n\u003ch3\u003eWhat it is, and who it is for\u003c\/h3\u003e\n\u003cp\u003eThe Conforto KHE-02-G023-H3 is a 23 kW Hiboy electric furnace, or 78,530 BTU\/h according to the manufacturer, equipped with a five-speed 1\/2 HP ECM (Ecotech) motor. It heats a home with solid heating needs on its own, and it becomes the indoor unit of a complete central system as soon as a heat pump or air conditioner coil is added, up to 3.0 tons.\u003c\/p\u003e\n\u003cp\u003eIt is aimed at homeowners converting their central heating to a heat pump, or getting ready to, whose mechanical space calls for a particular position: utility closet, narrow mechanical room, ducts under the floor.\u003c\/p\u003e\n\u003ch3\u003eWhy the ECM motor matters with a heat pump\u003c\/h3\u003e\n\u003cp\u003eA coil works well when the airflow through it is right. This furnace’s ECM motor has five speeds, and Conforto publishes the airflow of four of them: from 1,275 CFM on HIGH to 600 CFM on MED-LOW, depending on duct pressure. Our technicians can therefore set one speed for heating and another for cooling, instead of a compromise.\u003c\/p\u003e\n\u003cp\u003eWhen the heat pump is heating, the five elements switch to backup. During defrost, the control turns on one or more elements depending on the DIP switch 3 setting. The coil can go on the supply or the return side.\u003c\/p\u003e\n\u003ch3\u003eInstalled in the position that fits\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is 20 in wide by 21 in deep. Conforto allows three positions: upflow, downflow, with a non-combustible base mandatory on a combustible floor, or horizontal on the right side. Horizontal on the left side is not allowed, nor is placement on the front or back. On the electrical side, a 240 V single-phase circuit is needed with a 125 A minimum ampacity, a breaker of no more than 125 A and 2 AWG wire.\u003c\/p\u003e\n\u003ch3\u003eOur installation, from start to finish\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eFree on-site estimate: possible position, ducts, electrical panel.\u003c\/li\u003e\n\u003cli\u003eWritten quote, for the furnace alone or for the furnace with the heat pump.\u003c\/li\u003e\n\u003cli\u003eInstallation of the KHE, duct connections, electrical hookup and a 1 or 2 stage thermostat, smart if you like.\u003c\/li\u003e\n\u003cli\u003eECM speed settings and commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAirGreen is a family business established in Montreal for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work: the furnace, the coil and the hookup stay with the same team.\u003c\/p\u003e\n\u003ch3\u003eLet’s take the next step\u003c\/h3\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e. Tell us whether you are after the furnace alone or a complete system, and we prepare the quote accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate and talk to us about your \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options for the furnace and the heat pump.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801702301988,"sku":"KHE-02-G023-H3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/FOURNAISE_ELECTRIQUE_CONFORTO_HIBOY_KHE02_KHE_02_G023_H3_00_23_KW_ECM_1_2_HP_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082487"},{"product_id":"fournaise-electrique-conforto-mhah-4-tonnes-48000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 4 Tons - 48000 BTU - R410A","description":"\u003ch2\u003eA 4-ton Conforto air handler that keeps a compact footprint\u003c\/h2\u003e\n\u003ch3\u003eFor large homes\u003c\/h3\u003e\n\u003cp\u003eThe MHAH148DACFC is the 4-ton (48,000 BTU\/h) air handler of the MHAH series, one of the ranges in Conforto’s brochure on central heat pump systems. It is meant for large homes: two-storey houses with a finished basement, extended residences, homes where the original system is no longer enough. Conforto publishes a maximum airflow of 1,282 CFM for it.\u003c\/p\u003e\n\u003cp\u003eIn \u003cstrong\u003eLaval\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, these homes often have ductwork designed for an older furnace. Before proposing 4 tons, we measure the main ducts and return air: high airflow in ducts that are too narrow makes a system noisy at the grilles, whatever the equipment.\u003c\/p\u003e\n\u003ch3\u003eCompact for its size\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is 21.02 in wide, 21.02 in deep and 49.02 in high. Conforto publishes exactly these dimensions for the 2.5 and 3-ton sizes of the series. For a mechanical room already occupied by a water heater and an electrical panel, that is an advantage: moving to 4 tons takes no more floor space than a 3-ton from the same series.\u003c\/p\u003e\n\u003cp\u003eThe air handler runs on 208\/230 V single phase, 60 Hz, and connects to the outdoor unit with a 3\/8 in liquid line and a 3\/4 in suction line.\u003c\/p\u003e\n\u003ch3\u003eNoise: location matters\u003c\/h3\u003e\n\u003cp\u003eConforto publishes 50 dB at maximum speed, 47 dB at medium and 43.5 dB at minimum. At this size, we place the air handler away from bedrooms when the house allows, and we set up the system so it runs at the lower speeds most of the time, where it is quietest.\u003c\/p\u003e\n\u003ch3\u003eConditions and installation\u003c\/h3\u003e\n\u003cp\u003eThis air handler is bought alone: plan for the matched Conforto outdoor unit, which we confirm with you before ordering. Without it, it does not qualify for the LogisVert grant, which follows the certified outdoor unit + air handler pair. No heater kit appears for this model in our data; we validate any electric backup option with Conforto before ordering.\u003c\/p\u003e\n\u003cp\u003eAirGreen, a family business established in Montreal for more than fifteen years, holds RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work. We offer a free on-site estimate and a written quote. Our technicians install the air handler, adapt the plenum, connect the ducts, the refrigerant piping, the condensate drain and the electrical supply, pull a vacuum and commission the system. We install in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e and throughout Greater Montreal.\u003c\/p\u003e\n\u003ch3\u003eA large home, a system to match\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBook your free estimate: we measure your ducts and mechanical room, then you receive a detailed written quote. \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003eFinancing\u003c\/a\u003e is available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801715769636,"sku":"MHAH148DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH148DACFC_00_4_TONNES_48000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"},{"product_id":"fournaise-electrique-conforto-mhah-5-tonnes-60000-btu-r410a","title":"CONFORTO MHAH Electric Furnace | 5 Tons - 60000 BTU - R410A","description":"\u003ch2\u003e1,582 CFM of airflow for large ducted homes\u003c\/h2\u003e\n\u003ch3\u003eThe largest air handler in the Conforto MHAH series\u003c\/h3\u003e\n\u003cp\u003eThe MHAH160DACFC is the 5-ton (60,000 BTU) indoor unit of Conforto’s MHAH series. Installed in the basement or a mechanical room, it pushes heated or cooled air through the home’s ductwork. Conforto lists it in its brochure on central ducted heat pump systems, with a maximum airflow of 1,582 CFM.\u003c\/p\u003e\n\u003cp\u003eThis size is mainly for large homes, two-storey houses with a finished basement and buildings whose ducts serve many rooms. For a smaller house, a smaller size in the same series is often a better fit. We run the numbers with you rather than default to the biggest unit.\u003c\/p\u003e\n\u003ch3\u003eWhat to plan for in a Quebec home\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures 21.02 x 24.49 x 52.99 in (width x depth x height). In many cottages in the region, the old unit sat in a corner of the basement near the electrical panel. That is often the right spot, as long as you leave the service clearance the manufacturer requires.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, it runs on 208\/230 V, single phase, 60 Hz. On the refrigerant side, it connects with a 3\/8 in liquid line and a 7\/8 in suction line. If you plan to reuse existing lines, we check their size and condition before confirming the quote.\u003c\/p\u003e\n\u003cp\u003eFor sound, Conforto publishes three values: 51 dB at maximum speed, 45.5 dB at medium speed and 41.5 dB at minimum speed. The cabinet spends most of its time at the lower speeds, and the location you choose also affects what you hear upstairs.\u003c\/p\u003e\n\u003ch3\u003eSold alone: what that means for you\u003c\/h3\u003e\n\u003cp\u003eThe air handler is sold without an outdoor unit. It therefore has no certified efficiency rating on its own, and it does not qualify for the LogisVert grant: the grant follows the certified outdoor unit + air handler pair. If your project is to replace the whole system, we offer you the complete central heat pump and check that the pair qualifies before you sign.\u003c\/p\u003e\n\u003ch3\u003eWhat AirGreen’s installation covers\u003c\/h3\u003e\n\u003cp\u003eAirGreen is a family business established in \u003cstrong\u003eMontreal\u003c\/strong\u003e for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. For this air handler, our technicians take care of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe free on-site visit and estimate, followed by a written quote;\u003c\/li\u003e\n\u003cli\u003esetting the cabinet and connecting it to the ductwork, existing or new;\u003c\/li\u003e\n\u003cli\u003ethe refrigerant and electrical connections;\u003c\/li\u003e\n\u003cli\u003ecommissioning the complete system with the matched outdoor unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe work in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAsk for your free estimate: we confirm the match with the outdoor unit, measure the space and walk you through the \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e options.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conforto","offers":[{"title":"Default Title","offer_id":67801811910948,"sku":"MHAH160DACFC","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CABINET_SOUFFLEUR_CONFORTO_MHAH_MHAH160DACFC_00_5_TONNES_60000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082474"}],"url":"https:\/\/airgreen.ca\/en\/collections\/fournaise-electrique-conforto-installation-a-montreal-laval-longueuil-rive-sud-et-rive-nord.oembed?page=2","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}