{"title":"TCL APEX XS Basalt Grey Central Heat Pump | Installation in Greater Montreal","description":null,"products":[{"product_id":"thermopompe-centrale-tcl-apex-xs-noir-2-tonnes-24000-btu","title":"TCL APEX XS Central Heat Pump (Black) | 2 Tons - 24000 BTU","description":"\u003ch2\u003eWhen the Outdoor Unit Is Visible: Basalt Grey Changes the Conversation\u003c\/h2\u003e\n\u003cp\u003eNo one buys a heat pump for its appearance. But many of our clients in \u003cstrong\u003eOld Longueuil\u003c\/strong\u003e, \u003cstrong\u003eWestmount\u003c\/strong\u003e, \u003cstrong\u003eOutremont\u003c\/strong\u003e, or the heritage areas of \u003cstrong\u003eLe Plateau\u003c\/strong\u003e ask us the same question when choosing a location: is there any way to avoid that large beige box visible from the street?\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e2-ton TCL APEX XS central heat pump\u003c\/strong\u003e in \u003cstrong\u003eBasalt Grey\u003c\/strong\u003e meets this constraint without technical compromise. The unit is mechanically identical to the light-colored version — same components, same certified ratings, same certification. Only the surface treatment of the outdoor unit differs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the dark finish actually solves\u003c\/h3\u003e\n\u003cp\u003eA basalt-gray cabinet visually blends into a concrete foundation, dark brick wall, gray aluminum siding, or dense landscaping. In the real-world situations we encounter:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA narrow backyard visible from the alley\u003c\/strong\u003e, where the unit cannot be concealed behind a screen;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA side of the house exposed to the street\u003c\/strong\u003e, when no other location meets the required clearances;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA rooftop terrace or condo balcony\u003c\/strong\u003e, where the unit remains permanently within the occupants' field of view;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA zoning or condominium regulation\u003c\/strong\u003e requiring discreet integration of mechanical equipment — common in central boroughs and newer condominium corporations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is also a practical benefit: a dark finish better hides limescale marks, splashes, and the gray film that street dust deposits on any outdoor unit in an urban environment. After three winters of salt and slush, the difference in appearance is clear.\u003c\/p\u003e\n\u003cp\u003eTo be clear about what the finish does not change: it has no measurable effect on heat-exchanger performance or energy consumption. The choice is aesthetic, and it is legitimate as such; we will not claim otherwise.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance identical to the light-colored version\u003c\/h3\u003e\n\u003cp\u003eData from the NEEP cold-climate heat pump directory, based on AHRI-certified testing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24,000 BTU\/h at 8.3°C\u003c\/strong\u003e — COP 3.80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24,000 BTU\/h at -8°C\u003c\/strong\u003e — COP 2.50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24,000 BTU\/h at -15°C\u003c\/strong\u003e — COP 1.85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13,300 BTU\/h at -30°C\u003c\/strong\u003e at maximum capacity — COP 1.20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith \u003cstrong\u003e19.0 SEER2\u003c\/strong\u003e, \u003cstrong\u003e12.0 EER2\u003c\/strong\u003e, and \u003cstrong\u003e10.0 HSPF2\u003c\/strong\u003e, this capacity offers the best seasonal heating efficiency in the entire APEX XS series. Its full capacity remains available down to \u003cstrong\u003e-15°C\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler\u003c\/strong\u003e: H24APH20UDE — \u003cstrong\u003eOutdoor unit\u003c\/strong\u003e: H24SDH20XQC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAHRI certificate\u003c\/strong\u003e: 218453815 — \u003cstrong\u003eENERGY STAR number\u003c\/strong\u003e: 4622454\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant\u003c\/strong\u003e: \u003cstrong\u003eR-32\u003c\/strong\u003e, 68.1 oz charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 835 CFM — \u003cstrong\u003estatic pressure\u003c\/strong\u003e: 0.58 \/ 0.8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor power supply\u003c\/strong\u003e: 220 V — \u003cstrong\u003eMCA 19 A\u003c\/strong\u003e, \u003cstrong\u003eMOP 30 A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant piping\u003c\/strong\u003e: 3\/8 in. liquid, 3\/4 in. gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level\u003c\/strong\u003e: 45 dB(A) indoors, 53 dB(A) outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-handler dimensions\u003c\/strong\u003e: 21.00 x 21.00 x 46.44 in. — \u003cstrong\u003efilter\u003c\/strong\u003e 18 x 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor-unit dimensions\u003c\/strong\u003e: 38.50 x 16.56 x 31.63 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogisVert rebate\u003c\/strong\u003e: $2,880 in an existing home\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe air handler's \u003cstrong\u003e45 dB(A)\u003c\/strong\u003e matters just as much as appearance when the unit is installed near a living space — in a mechanical room adjacent to a basement bedroom, for example. It is the quietest level in the series.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the outdoor location: the method, in order\u003c\/h2\u003e\n\u003cp\u003eWhen appearance enters the equation, the temptation is to first choose where the unit will be least visible and then check whether it is feasible. We do the opposite, because starting with appearance leads to rework.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical clearances first.\u003c\/strong\u003e The manufacturer requires a minimum of 12 in. in front of the air return and 40 in. on the discharge side. A discreet but cramped location causes the unit to recirculate its own air, and capacity collapses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnow and condensate management next.\u003c\/strong\u003e The unit is raised above the area's typical snow depth, and defrost water must drain somewhere other than beneath its own feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProperty lines and neighbors.\u003c\/strong\u003e Several municipalities in \u003cstrong\u003eGreater Montreal\u003c\/strong\u003e regulate the noise of mechanical equipment near property lines. This check is done beforehand, not after a complaint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiping length and routing.\u003c\/strong\u003e Every foot added beyond the factory charge requires a charge adjustment and affects efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAesthetics last\u003c\/strong\u003e, among the locations that meet the first four criteria. This is where the Basalt Grey finish truly expands the options.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eWhat the dark finish does not eliminate\u003c\/h3\u003e\n\u003cp\u003eA discreet unit is still a unit that must be maintained. Decorative screens that some homeowners add afterward are the most common cause of capacity loss we see during service visits: a slatted fence installed ten inches from the air discharge, a hedge that has grown three feet in two seasons, or a shelter designed to hide the unit that ends up suffocating it.\u003c\/p\u003e\n\u003cp\u003eIf a screen is desired, it should be designed as part of the installation, while respecting the clearances, not added the following summer.\u003c\/p\u003e\n\n\u003ch3\u003eThe air handler and its three positions\u003c\/h3\u003e\n\u003cp\u003eThe indoor unit can be installed in \u003cstrong\u003eupflow vertical, left horizontal, or right horizontal\u003c\/strong\u003e configuration, covering nearly all basement and mechanical-room layouts. Right-horizontal installation only requires repositioning the condensate pan.\u003c\/p\u003e\n\u003cp\u003eThe system is compatible with \u003cstrong\u003estandard 24 VAC thermostats\u003c\/strong\u003e through RS485 communication; \u003cstrong\u003eWi-Fi connectivity\u003c\/strong\u003e is available as an option through the XK-120D4 module. An \u003cstrong\u003eR-32 leak detector\u003c\/strong\u003e, drain-pan heater, and compressor heater are included as standard.\u003c\/p\u003e\n\n\u003ch3\u003eWhy AirGreen\u003c\/h3\u003e\n\u003cp\u003eWe install \u003cstrong\u003eHVAC\u003c\/strong\u003e systems in areas where visual integration matters as much as performance — central boroughs, condominiums, and heritage buildings. A unit's finish never replaces a proper installation, but it can sometimes make it possible to keep the technically optimal location instead of settling for a compromise.\u003c\/p\u003e\n\u003cp\u003eOur job is to prioritize these criteria correctly: first what makes the system work, then what makes it acceptable to look at.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for a technical visit and a complete quote for the 2-ton TCL APEX XS in Basalt Grey\u003c\/strong\u003e, in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 years on the compressor, 10 years on parts and 6 years on labor, straight from the distributor.\u003c\/p\u003e","brand":"TCL","offers":[{"title":"Default Title","offer_id":56286077714724,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_CENTRALE_TCL_APEX_XS_R32_BASALT_GREY_2_TONNES_24000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD_51793383-b168-4c9e-b7af-35262bd7850c.png?v=1790972814"},{"product_id":"thermopompe-centrale-tcl-apex-xs-noir-3-tonnes-36000-btu","title":"TCL APEX XS Central Heat Pump (Black) | 3 Tons - 36000 BTU","description":"\u003ch2\u003eHow Do You Determine That a House Needs Three Tons, Not Four?\u003c\/h2\u003e\n\u003cp\u003eThe most consequential question in a central heat pump project is not the brand. It is the capacity. A one-ton difference in either direction affects comfort, energy costs, and compressor life—and this decision is made before even discussing a model.\u003c\/p\u003e\n\u003cp\u003eHere, we use the \u003cstrong\u003e3-ton TCL APEX XS central heat pump\u003c\/strong\u003e in \u003cstrong\u003eBasalt Grey\u003c\/strong\u003e as a practical example to explain how proper sizing is determined and why the rule of thumb so often fails in Quebec.\u003c\/p\u003e\n\n\u003ch3\u003eWhy “One Ton per 500 Square Feet” Does Not Work\u003c\/h3\u003e\n\u003cp\u003eThis rule has been around for decades. It originated in the southern United States, where the dominant load is air conditioning and the housing stock is relatively uniform. Applied to the \u003cstrong\u003eGreater Montreal Area\u003c\/strong\u003e housing stock, it produces errors in both directions.\u003c\/p\u003e\n\u003cp\u003eTwo 1,800-square-foot homes can have loads that differ by as much as two to one. What separates them includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYear of construction and actual insulation.\u003c\/strong\u003e An unrenovated 1955 cottage and a 2015 construction have nothing in common thermally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow area and orientation.\u003c\/strong\u003e A wall of south-facing windows is a major solar gain in summer and a significant heat loss in winter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir tightness.\u003c\/strong\u003e Infiltration accounts for a considerable share of the load in older buildings, and it cannot be seen on a floor plan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign temperature for the area.\u003c\/strong\u003e It is not the same in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eSaint-Jérôme\u003c\/strong\u003e, or \u003cstrong\u003eSainte-Agathe\u003c\/strong\u003e. Using the wrong one throws everything else off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume, not just floor area.\u003c\/strong\u003e Nine-foot ceilings add 12% more volume to heat than eight-foot ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of occupants and internal gains.\u003c\/strong\u003e These matter more than people generally assume for air conditioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat We Actually Calculate\u003c\/h3\u003e\n\u003cp\u003eA proper assessment produces two distinct numbers: the \u003cstrong\u003eheating load\u003c\/strong\u003e at the winter design temperature and the \u003cstrong\u003ecooling load\u003c\/strong\u003e at the summer design temperature. These two loads do not occur at the same time and do not necessarily point to the same capacity.\u003c\/p\u003e\n\u003cp\u003eWe then determine the \u003cstrong\u003ebalance point\u003c\/strong\u003e: the outdoor temperature at which the heat pump’s capacity exactly matches the building’s load. Below this point, supplemental heat takes over. This is the most useful figure we can provide a client because it concretely predicts how many hours per season the supplemental heating will operate.\u003c\/p\u003e\n\u003cp\u003eWith the 3-ton APEX XS, this calculation is clearer than usual for one specific reason: the unit maintains \u003cstrong\u003e36,000 BTU\/h down to -15°C\u003c\/strong\u003e. Its capacity curve is flat, so the balance point falls low and does not depend on questionable extrapolations.\u003c\/p\u003e\n\n\u003ch3\u003eCertified Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36,000 BTU\/h at 8.3°C\u003c\/strong\u003e — COP 3.60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36,000 BTU\/h at -8°C\u003c\/strong\u003e — COP 2.30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36,000 BTU\/h at -15°C\u003c\/strong\u003e — COP 1.85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18,800 BTU\/h at -30°C\u003c\/strong\u003e at maximum capacity — COP 1.20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eValues from the NEEP cold-climate heat pump directory, based on AHRI-certified testing. Seasonal efficiency: \u003cstrong\u003e18.0 SEER2\u003c\/strong\u003e, \u003cstrong\u003e11.0 EER2\u003c\/strong\u003e, \u003cstrong\u003e9.5 HSPF2\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Happens When the Capacity Is Chosen Incorrectly\u003c\/h3\u003e\n\u003cp\u003eThe two errors have distinct signatures, and we regularly diagnose them in systems installed by others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn oversized unit\u003c\/strong\u003e reaches the setpoint quickly and then shuts off. In cooling mode, short cycles do not allow enough time to remove humidity: the air becomes cold and clammy, the occupant lowers the setpoint, and energy consumption rises without improving comfort. In heating mode, repeated starts wear out the compressor and create noticeable temperature fluctuations. The paradox is consistent: an oversized system uses more energy and provides less comfort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn undersized unit\u003c\/strong\u003e causes the electric auxiliary heat to start far too often. Since auxiliary heat has an efficiency of 1.0 compared with 2.30 for the heat pump at -8°C, every hour of auxiliary operation costs more than twice as much. The expected project savings never materialize, and the homeowner wrongly concludes that “heat pumps do not work in Quebec.”\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler\u003c\/strong\u003e: H36APH20UDE — \u003cstrong\u003eOutdoor unit\u003c\/strong\u003e: H36SDH20XQC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAHRI certificate\u003c\/strong\u003e: 218453817 — \u003cstrong\u003eENERGY STAR number\u003c\/strong\u003e: 4622453\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant\u003c\/strong\u003e: \u003cstrong\u003eR-32\u003c\/strong\u003e, 105.8 oz charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 1,200 CFM — \u003cstrong\u003estatic pressure\u003c\/strong\u003e: 0.58 \/ 0.8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor power supply\u003c\/strong\u003e: 220 V — \u003cstrong\u003eMCA 30 A\u003c\/strong\u003e, \u003cstrong\u003eMOP 50 A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine set\u003c\/strong\u003e: 3\/8 in. liquid, 3\/4 in. gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level\u003c\/strong\u003e: 52 dB(A) indoors, 54 dB(A) outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor unit dimensions\u003c\/strong\u003e: 43.13 x 19.44 x 33.75 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary heat kits\u003c\/strong\u003e: 5, 10, or 15 kW — \u003cstrong\u003efilter\u003c\/strong\u003e 18 x 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogisVert assistance\u003c\/strong\u003e: $4,320 for existing homes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSizing the Auxiliary Heat: The Other Half of the Decision\u003c\/h2\u003e\n\u003cp\u003eChoosing the heat pump is not enough. You must decide what takes over below the balance point, and that choice has a direct impact on electricity use.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eauxiliary heating kits\u003c\/strong\u003e available for this model are 5, 10, or 15 kW. The instinct is to choose the largest one “for safety”—and that is precisely what should be avoided. An unjustified 15 kW element adds a considerable electrical load, may require a panel upgrade, and will never be fully used if the balance point is low.\u003c\/p\u003e\n\u003cp\u003eWhen an existing furnace is retained in a retrofit, the question does not even arise: it provides the auxiliary heat, and no electric element is required. This is often the most economical configuration in homes already equipped with a gas or dual-energy system.\u003c\/p\u003e\n\n\u003ch3\u003eThe Basalt Grey Finish\u003c\/h3\u003e\n\u003cp\u003eThis version differs from the Zinc White variant in the outdoor unit’s surface finish, with no mechanical or efficiency differences. The dark grey integrates better with a foundation, dark brick, or contemporary siding—a consideration that matters when the unit is visible from the street or an outdoor living area.\u003c\/p\u003e\n\n\u003ch3\u003eWhy AirGreen\u003c\/h3\u003e\n\u003cp\u003eRigorous sizing takes time and is not billed separately. Yet it is the step that determines whether a client will be satisfied for fifteen years or call us every winter. At \u003cstrong\u003eAirGreen\u003c\/strong\u003e, we calculate the loads, establish the balance point, size the auxiliary heat accordingly, and verify the available electrical capacity before providing a quote.\u003c\/p\u003e\n\u003cp\u003eWe often recommend a lower capacity than the one requested. It is rarely what the client expects to hear, and it is almost always the right decision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for a proper load calculation and a detailed quote for the 3-ton TCL APEX XS in Basalt Grey\u003c\/strong\u003e in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, and on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 years on the compressor, 10 years on parts and 6 years on labor, straight from the distributor.\u003c\/p\u003e","brand":"TCL","offers":[{"title":"Default Title","offer_id":56286077747492,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_CENTRALE_TCL_APEX_XS_R32_BASALT_GREY_3_TONNES_36000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD_07d58ba3-a66d-44f3-aca1-164161b0d138.png?v=1790972791"},{"product_id":"thermopompe-centrale-tcl-apex-xs-noir-4-tonnes-48000-btu","title":"TCL APEX XS Central Heat Pump (Black) | 4 Tons - 48000 BTU","description":"\u003ch2\u003eThe noise of a central system in a densely populated area: what 53 dB(A) means at the neighbor's home\u003c\/h2\u003e\n\u003cp\u003eIn neighborhoods where houses are only a few feet apart — \u003cstrong\u003eRosemont\u003c\/strong\u003e, \u003cstrong\u003eVilleray\u003c\/strong\u003e, \u003cstrong\u003eVerdun\u003c\/strong\u003e, \u003cstrong\u003eOld Longueuil\u003c\/strong\u003e, and the duplex areas of \u003cstrong\u003eLaval\u003c\/strong\u003e — the location of the outdoor unit is a neighborhood issue before it is a technical one. We have seen flawless installations become complaint cases because no one had checked where the neighboring bedroom window was.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTCL APEX XS 4-ton central heat pump\u003c\/strong\u003e in \u003cstrong\u003eBasalt Grey\u003c\/strong\u003e finish performs well in this regard: \u003cstrong\u003e53 dB(A)\u003c\/strong\u003e outdoors for a capacity of 48,000 BTU\/h. This is the lowest sound level among the four capacities in the series, including the lower-capacity models. Still, you need to understand what this figure means and what it does not guarantee.\u003c\/p\u003e\n\u003ch3\u003eHow to read a sound level correctly\u003c\/h3\u003e\n\u003cp\u003eA level of \u003cstrong\u003e53 dB(A)\u003c\/strong\u003e is measured at a standardized distance, in free field, with the unit operating at full capacity. Three factors change what the neighbor actually perceives:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance.\u003c\/strong\u003e The level decreases by approximately 6 dB each time the distance doubles. At six feet rather than three, the unit sounds noticeably less intrusive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflective surfaces.\u003c\/strong\u003e A unit placed in a narrow corridor between two brick walls does not lose sound energy: it bounces back. The same unit at the same level seems several decibels louder in this configuration than in an open area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure-borne transmission.\u003c\/strong\u003e This is the most underestimated factor. A unit rigidly attached to a wall or placed on a slab connected to the foundation transmits its vibrations through the building. The occupant then hears a low rumble indoors, which the level measured outside does not predict at all.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA real advantage of inverter technology is worth highlighting: the unit modulates. It operates most of the time well below its maximum capacity, and therefore well below its stated sound level. The 53 dB(A) corresponds to a peak, not its usual operating level.\u003c\/p\u003e\n\u003ch3\u003eOur placement guidelines in densely populated areas\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystematic anti-vibration mounts\u003c\/strong\u003e, and never rigidly fastened to the building structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance from bedroom windows\u003c\/strong\u003e — both yours and your neighbor's. This check is done on-site, by looking at the adjacent façade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not install in a narrow corridor closed at both ends\u003c\/strong\u003e when an alternative exists. The reverberation effect there is significant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrient the air outlet\u003c\/strong\u003e toward the most open space available, never toward a nearby window at close range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck municipal regulations\u003c\/strong\u003e on mechanical equipment noise at the property line — thresholds vary from one borough to another in \u003cstrong\u003eGreater Montreal\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe vertical shape of the 4-ton outdoor unit is helpful in these situations: it takes up little ground space, making it possible to position it farther from the property line where a wider appliance would not fit.\u003c\/p\u003e\n\u003ch3\u003eCertified data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e48,000 BTU\/h at 8.3 °C\u003c\/strong\u003e — COP 3.60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48,000 BTU\/h at -8 °C\u003c\/strong\u003e — COP 2.30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48,000 BTU\/h at -15 °C\u003c\/strong\u003e — COP 1.85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24,000 BTU\/h at -30 °C\u003c\/strong\u003e at maximum capacity — COP 1.20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eValues from the NEEP cold-climate heat pump directory, based on AHRI-certified tests. Full capacity down to \u003cstrong\u003e-15 °C\u003c\/strong\u003e, with 24,000 BTU\/h still available at \u003cstrong\u003e-30 °C\u003c\/strong\u003e. Seasonal performance: \u003cstrong\u003e18.0 SEER2\u003c\/strong\u003e, \u003cstrong\u003e11.0 EER2\u003c\/strong\u003e, \u003cstrong\u003e9.5 HSPF2\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical data sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler\u003c\/strong\u003e : H48APH20UDE — \u003cstrong\u003eOutdoor unit\u003c\/strong\u003e : H48SDH20XQC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAHRI certificate\u003c\/strong\u003e : 218453819 — \u003cstrong\u003eENERGY STAR number\u003c\/strong\u003e : 4622452\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant\u003c\/strong\u003e: \u003cstrong\u003eR-32\u003c\/strong\u003e, 123.5 oz charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 1,530 CFM — \u003cstrong\u003estatic pressure\u003c\/strong\u003e: 0.58 \/ 0.8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor power supply\u003c\/strong\u003e: 220 V — \u003cstrong\u003eMCA 36 A\u003c\/strong\u003e, \u003cstrong\u003eMOP 60 A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiping\u003c\/strong\u003e: 3\/8 in liquid, 7\/8 in gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level\u003c\/strong\u003e: 52 dB(A) indoors, 53 dB(A) outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler dimensions\u003c\/strong\u003e: 24.50 x 21.00 x 56.00 in (D cabinet) — \u003cstrong\u003efilter\u003c\/strong\u003e 22 x 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor unit dimensions\u003c\/strong\u003e: 40.69 x 16.13 x 52.69 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplementary heat kits\u003c\/strong\u003e: 5, 10, 15, or 20 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogisVert assistance\u003c\/strong\u003e: $5,760 for existing homes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIndoor noise, the other half of acoustic comfort\u003c\/h2\u003e\n\u003cp\u003eMuch is said about the outdoor unit and rarely about the air handler. Yet it is the one located inside the building, often in the basement and sometimes next to an occupied room.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e52 dB(A)\u003c\/strong\u003e measured at the appliance are a starting point. What the occupant hears then depends almost entirely on the installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA plenum that is too short\u003c\/strong\u003e at the fan outlet creates audible turbulence throughout the network of \u003cstrong\u003educts\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn undersized return-air system\u003c\/strong\u003e produces a characteristic whistling sound at the grille, indicating that the unit is drawing in more air than the opening allows through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA rigid connection between the unit and the ducts\u003c\/strong\u003e transmits fan vibrations throughout the house. A flexible connection solves the problem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow set too high\u003c\/strong\u003e to compensate for a restricted duct system turns a quiet system into a wind tunnel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn a unit that moves \u003cstrong\u003e1,530 CFM\u003c\/strong\u003e, these details are not cosmetic. A central system's quiet operation is achieved during installation, not at the time of purchase.\u003c\/p\u003e\n\u003ch3\u003eThe Basalt Grey finish in an urban setting\u003c\/h3\u003e\n\u003cp\u003eIn a backyard in a central neighborhood, the outdoor unit is visible from the lane, the neighbor's balcony, and often the kitchen window. Basalt grey blends in better against a concrete foundation or dark brick than the lighter finish, and it maintains a clean appearance longer despite street dust and salt residue.\u003c\/p\u003e\n\u003cp\u003eMechanically, the two finishes are strictly identical: same components, same dimensions, same \u003cstrong\u003eENERGY STAR Cold Climate\u003c\/strong\u003e certification.\u003c\/p\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eA new noise is almost always the first sign that maintenance is needed. A rumble outdoors often indicates a loose mount or a sunken support; an indoor whistling sound, a clogged \u003cstrong\u003e22 x 20 filter\u003c\/strong\u003e or obstructed return air; a rattling sound at startup, a loose panel.\u003c\/p\u003e\n\u003cp\u003eWe recommend annual professional maintenance covering the indoor coil, condensate pan and drain, \u003cstrong\u003eR-32\u003c\/strong\u003e charge, outdoor coil, supports, and airflow balancing.\u003c\/p\u003e\n\u003ch3\u003eWhy AirGreen\u003c\/h3\u003e\n\u003cp\u003eWe have been installing central \u003cstrong\u003eHVAC\u003c\/strong\u003e systems in dense neighborhoods for years, with all the constraints that entails: narrow lanes, shared yards, neighboring properties, and municipal regulations. Choosing the location, installing vibration-damping mounts, using a flexible connection, and sizing the return-air system are part of our standard method—not optional add-ons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for a technical assessment and a complete quote for the 4-ton TCL APEX XS in Basalt Grey finish\u003c\/strong\u003e, in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 years on the compressor, 10 years on parts and 6 years on labor, straight from the distributor.\u003c\/p\u003e","brand":"TCL","offers":[{"title":"Default Title","offer_id":56286077780260,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_CENTRALE_TCL_APEX_XS_R32_BASALT_GREY_4_TONNES_48000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD_949df9f0-5ddd-4fb7-9bef-eae659f6018a.png?v=1790972769"},{"product_id":"thermopompe-centrale-tcl-apex-xs-noir-5-tonnes-60000-btu","title":"TCL APEX XS Central Heat Pump (Black) | 5 Tons - 60000 BTU","description":"\u003ch2\u003eMoving away from oil or all-electric heating: converting a large building\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e5-ton\u003c\/strong\u003e projects rarely come to us as simple replacements. They are conversions: a building still heated with oil, a property whose electric baseboards cost a fortune every winter, or a commercial space equipped with a gas system at the end of its service life. The question is not only which heat pump to choose, but also what heating architecture to put in place for the next fifteen years.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e5-ton TCL APEX XS central heat pump\u003c\/strong\u003e in \u003cstrong\u003eBasalt Grey\u003c\/strong\u003e finish is well suited to these conversions because it integrates equally well into a complete system or as an add-on to an existing heating appliance.\u003c\/p\u003e\n\u003ch3\u003eThree architectures, three economic rationales\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDual fuel with an existing furnace.\u003c\/strong\u003e The heat pump provides heating as long as its efficiency exceeds that of the fossil-fuel appliance; below the switchover point, the furnace takes over. This configuration has the advantage of adding almost no electrical load—the backup already exists and does not consume electricity. In a building with limited electrical service, this is often the only practical option in the short term.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll-electric with electric resistance backup.\u003c\/strong\u003e The heat pump handles the load down to its balance point; a \u003cstrong\u003e5, 10, 15, or 20 kW heating kit\u003c\/strong\u003e supplements it below that threshold. This is a simple configuration with no on-site fuel, but it requires substantial electrical capacity and careful sizing of the element.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetrofit with a coil in a cabinet.\u003c\/strong\u003e Only the heat pump section is replaced, while the existing air handler is retained. This is the most economical option when the existing blower is recent and properly sized—but it requires verifying that the blower can actually move \u003cstrong\u003e1,800 CFM\u003c\/strong\u003e at the required pressure, which is not always the case.\u003c\/p\u003e\n\u003cp\u003eWe evaluate all three before making a recommendation. The best choice depends on the current fuel, available electrical capacity, applicable rate, and the building's expected holding period.\u003c\/p\u003e\n\u003ch3\u003eSizing the supplemental heat without overloading the electrical service\u003c\/h3\u003e\n\u003cp\u003eThis is the central trade-off in a project of this size. The outdoor unit already requires a minimum ampacity of \u003cstrong\u003e42 A\u003c\/strong\u003e with \u003cstrong\u003e60 A\u003c\/strong\u003e protection. Adding a \u003cstrong\u003e20 kW\u003c\/strong\u003e element at 230 V represents a major additional load, with its own power supply and protection.\u003c\/p\u003e\n\u003cp\u003eThe reflex of choosing the largest available kit is costly and rarely justified. The correct approach:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalculate the building load\u003c\/strong\u003e at the design temperature for the area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstablish the balance point\u003c\/strong\u003e using the heat pump’s capacity curve—which remains at \u003cstrong\u003e50,000 BTU\/h at -15 °C\u003c\/strong\u003e for this model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize the supplemental heat for the remaining gap\u003c\/strong\u003e below this point, not for the building’s total load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the electrical load calculation according to the Code\u003c\/strong\u003e, including all other building loads.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis method frequently results in a 10 kW element where 20 kW had been considered, avoiding an electrical service upgrade costing several thousand dollars.\u003c\/p\u003e\n\u003ch3\u003eCertified data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e54,000 BTU\/h at 8.3 °C\u003c\/strong\u003e — COP 3.40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54,000 BTU\/h at -8 °C\u003c\/strong\u003e — COP 2.20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50,000 BTU\/h at -15 °C\u003c\/strong\u003e — COP 1.85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25,000 BTU\/h at -30 °C\u003c\/strong\u003e maximum capacity — COP 1.20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eValues from the NEEP cold-climate heat pump directory, based on AHRI-certified tests. Note: the commercial designation of this model is “60,000 BTU\/h,” but \u003cstrong\u003ethe certified nominal capacity is 54,000 BTU\/h\u003c\/strong\u003e, with a peak that can reach 60,000 BTU\/h in cooling mode. The certified value must be used for sizing.\u003c\/p\u003e\n\u003cp\u003eSeasonal performance: \u003cstrong\u003e17.0 SEER2\u003c\/strong\u003e, \u003cstrong\u003e10.0 EER2\u003c\/strong\u003e, \u003cstrong\u003e9.5 HSPF2\u003c\/strong\u003e. \u003cstrong\u003eENERGY STAR cold-climate\u003c\/strong\u003e certified.\u003c\/p\u003e\n\u003ch3\u003eTechnical data sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler\u003c\/strong\u003e : H60APH20UDE — \u003cstrong\u003eOutdoor unit\u003c\/strong\u003e : H60SDH20XQC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAHRI certificate\u003c\/strong\u003e : 218453821 — \u003cstrong\u003eENERGY STAR number\u003c\/strong\u003e : 4622451\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant\u003c\/strong\u003e: \u003cstrong\u003eR-32\u003c\/strong\u003e, 134.0 oz charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 1,800 CFM — \u003cstrong\u003estatic pressure\u003c\/strong\u003e: 0.58 \/ 0.8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor power supply\u003c\/strong\u003e: 220 V — \u003cstrong\u003eMCA 42 A\u003c\/strong\u003e, \u003cstrong\u003eMOP 60 A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiping\u003c\/strong\u003e: 3\/8 in. liquid, 7\/8 in. gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level\u003c\/strong\u003e: 53 dB(A) indoors, 54 dB(A) outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir handler dimensions\u003c\/strong\u003e: 24.50 x 21.00 x 56.00 in. (D cabinet) — \u003cstrong\u003efilter\u003c\/strong\u003e 22 x 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor unit dimensions\u003c\/strong\u003e: 40.69 x 16.13 x 52.69 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating range\u003c\/strong\u003e: down to -30 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogisVert grant\u003c\/strong\u003e: $6,480 in an existing home\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat a conversion changes beyond the equipment\u003c\/h2\u003e\n\u003cp\u003eRemoving an oil- or gas-fired appliance is not limited to disconnecting the old system. Several elements are part of the project and must be included in the budget from the outset:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank removal\u003c\/strong\u003e and, where applicable, checking the soil in the case of heating oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing the chimney\u003c\/strong\u003e or repurposing the exhaust flue, depending on what remains connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModifications to the ductwork system\u003c\/strong\u003e if the required airflow exceeds what the original installation can provide—a critical point at 1,800 CFM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh-air treatment\u003c\/strong\u003e in a commercial building, which is subject to specific requirements and represents a separate load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment of the electricity rate\u003c\/strong\u003e and reassessment of the demand charge, particularly in dual-energy systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA quote covering only the equipment gives an appealing price and a higher final bill. We prefer to price the entire project.\u003c\/p\u003e\n\u003ch3\u003eThe Basalt Grey finish\u003c\/h3\u003e\n\u003cp\u003eThe 5-ton outdoor unit is tall: \u003cstrong\u003e52.69 in\u003c\/strong\u003e. On a commercial property or in an apartment building's backyard, it is visible. Basalt Grey blends much better with a concrete foundation, metal siding, or dark brick than the light finish, and it maintains a clean appearance despite salt residue and street dust. There is no mechanical difference from the Zinc White version.\u003c\/p\u003e\n\u003ch3\u003eMaintenance in demanding conditions\u003c\/h3\u003e\n\u003cp\u003eA 5-ton system that provides a building's primary heating justifies professional maintenance at least annually, and every six months in commercial use. The program covers the indoor coil, the \u003cstrong\u003e22 x 20 filter\u003c\/strong\u003e, the condensate pan and drain, the \u003cstrong\u003eR-32\u003c\/strong\u003e charge, the outdoor coil, clearances, backup heat operation, and airflow measurement.\u003c\/p\u003e\n\u003cp\u003eThe condensate drain requires particular attention: the volume of water produced during full cooling by a unit of this capacity can turn a partially clogged drain into water damage within a few hours.\u003c\/p\u003e\n\u003ch3\u003eWhy AirGreen\u003c\/h3\u003e\n\u003cp\u003eA heating conversion in a large building involves the electrical system, \u003cstrong\u003eductwork\u003c\/strong\u003e, ventilation, removal of the old system, and financial assistance programs. At \u003cstrong\u003eAirGreen\u003c\/strong\u003e, we handle these aspects together rather than sequentially because the decisions influence one another: the choice of backup heat depends on the electrical service, which depends on the balance point, which depends on the load calculation.\u003c\/p\u003e\n\u003cp\u003eWe provide the customer with a quote that reflects the complete project, including the necessary corrections identified in advance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for a conversion analysis, electrical load calculation, and complete quote for the 5-ton TCL APEX XS in Basalt Grey finish\u003c\/strong\u003e in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e, and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 years on the compressor, 10 years on parts and 6 years on labor, straight from the distributor.\u003c\/p\u003e","brand":"TCL","offers":[{"title":"Default Title","offer_id":56286077813028,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_CENTRALE_TCL_APEX_XS_R32_BASALT_GREY_5_TONNES_60000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD_d597c9e9-bafb-4e67-a3d0-a95a572eeaa4.png?v=1790972738"}],"url":"https:\/\/airgreen.ca\/en\/collections\/thermopompe-centrale-tcl-apex-xs-gris-basalt-installation-grand-montreal.oembed","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}