{"product_id":"chauffe-eau-thermodynamique-bradford-white-re2h65t10-1nctt-65-gallons-montreal-laval-longueuil-rive-sud-rive-nord","title":"BRADFORD WHITE RE2H65T10-1NCTT Heat Pump Water Heater (65 gallons) | Montreal, Laval, Longueuil, South Shore \u0026 North Shore","description":"\u003ch2\u003eA 65 US gallon heat pump water heater that draws its heat from basement air\u003c\/h2\u003e\n\u003cp\u003eIn many Greater Montreal homes, hot water still comes from a conventional electric tank that heats water with resistance elements alone. The \u003cstrong\u003eBradford White RE2H65T10-1NCTT heat pump water heater\u003c\/strong\u003e keeps the familiar shape of an upright tank, but hands most of the work to an \u003cstrong\u003eintegrated heat pump\u003c\/strong\u003e mounted on top of the unit. It holds \u003cstrong\u003e65 US gallons (54 imperial gallons, 246 L)\u003c\/strong\u003e and is aimed at homeowners who want to replace an ageing electric tank with a far more efficient unit without changing any of their habits. AirGreen installs it in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis size suits a single-family house where, for example, a family of three or four lives, with a main bathroom and a powder room. Its reserve gives the heat pump time to work between the morning and evening peaks, and that is exactly what allows a unit of this type to run on its compressor most of the time rather than on its elements.\u003c\/p\u003e\n\u003ch3\u003eHow the heat pump heats the water\u003c\/h3\u003e\n\u003cp\u003eA heat pump water heater applies the principle of an ordinary \u003cstrong\u003eheat pump\u003c\/strong\u003e to the tank. A fan moves room air across an evaporator, where the refrigerant picks up the heat contained in that air. The compressor then concentrates this heat and transfers it to the water in the tank. The air leaving the unit is therefore cooler and drier than when it went in. Because a good share of the energy comes from the surrounding air rather than from the meter, the unit delivers more heat to the water than it consumes in electricity.\u003c\/p\u003e\n\u003cp\u003eTwo \u003cstrong\u003ebackup electric elements\u003c\/strong\u003e, screw-in type, complete the heat pump. They take over when demand exceeds what the compressor can supply, or when you select a mode that calls on them. The factory wiring is interlocked: the two elements never heat at the same time (non-simultaneous, single-phase operation).\u003c\/p\u003e\n\u003ch3\u003eManufacturer data for the RE2H65T10-1NCTT\u003c\/h3\u003e\n\u003cp\u003eThe following values come from Bradford White's technical documentation for this model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 65 US gallons, or 54 imperial gallons or 246 L.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUniform Energy Factor (UEF): 3.64\u003c\/strong\u003e, based on the AHRI directory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor only:\u003c\/strong\u003e 6 US gal\/h (5 imperial gal\/h) at a 90 °F rise, or 23 L\/h at a 50 °C rise.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecovery, compressor and element:\u003c\/strong\u003e 24 US gal\/h (20 imperial gal\/h), or 91 L\/h.\u003c\/li\u003e\n\u003cli\u003eTest conditions for these figures: standard hybrid mode, ambient air at 19.7 °C (67.5 °F) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBackup elements:\u003c\/strong\u003e 4,000 W at 240 V; at 208 V, the upper element is 3,000 W.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater connections:\u003c\/strong\u003e 3\/4 in. (19 mm) NPT, dielectric fittings installed at the factory.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e height of 63 3\/4 in. (1,619 mm), diameter of 25 in. (635 mm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 236 lb (107 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFive modes to follow the season and the demand\u003c\/h3\u003e\n\u003cp\u003eThe control panel offers five operating modes. \u003cstrong\u003eHeat pump mode\u003c\/strong\u003e uses the compressor only: it is the most frugal setting, well suited when demand is steady. \u003cstrong\u003eStandard hybrid mode\u003c\/strong\u003e gives priority to the heat pump and calls on the elements only when needed; it is also the mode in which Bradford White establishes its recovery data. \u003cstrong\u003eHybrid plus mode\u003c\/strong\u003e relies more on the elements to rebuild the reserve faster, for example when the house has guests for a few days. \u003cstrong\u003eElectric mode\u003c\/strong\u003e runs on the elements only, which serves as a backup solution. Finally, \u003cstrong\u003evacation mode\u003c\/strong\u003e reduces the unit's activity during an extended absence.\u003c\/p\u003e\n\u003ch3\u003eWhere to put a heat pump water heater in a Quebec home\u003c\/h3\u003e\n\u003cp\u003eBecause it draws its heat from the air, this unit needs enough air volume around it. In Quebec, the basement, the mechanical room or a large laundry room are the most common locations. The manufacturer's location requirements, namely the room volume, the clearances around the unit and the drainage of condensate water, are checked during our visit, before the project is confirmed. At 63 3\/4 in. tall and 236 lb, the path down the stairs and the space under the joists are also part of the assessment.\u003c\/p\u003e\n\u003cp\u003eThe air discharged by the unit is cooler and drier. In summer, it cools and dries the basement, an effect many homeowners in the region appreciate. In winter, if the room is heated, part of the captured heat comes from the home's heating system. We take this into account in our recommendations rather than relying on the published energy factor alone.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right capacity\u003c\/h3\u003e\n\u003cp\u003eA heat pump heats water more slowly than an electric element: with the compressor alone, recovery is 6 US gallons per hour. That is why tank size matters more than with a conventional water heater. The 65 US gallon reserve of this model covers a typical day for a mid-sized family, after which the heat pump quietly rebuilds it during off-peak hours. If several showers follow one another without a break, or if the house has a large soaker tub, we also compare it with the larger-capacity version of the same line before making a recommendation.\u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp\u003eThe tank is protected by Bradford White's \u003cstrong\u003eVitraglas with Microban\u003c\/strong\u003e lining and by a \u003cstrong\u003eprotective anode rod\u003c\/strong\u003e, which wears over time in place of the steel. The 3\/4 in. NPT water connections receive dielectric fittings at the factory, which limits corrosion between dissimilar metals. The \u003cstrong\u003elow-restriction brass drain valve\u003c\/strong\u003e makes maintenance flushing easier, and the backup elements can be replaced without touching the tank since they are screw-in.\u003c\/p\u003e\n\u003cp\u003eAccording to the manufacturer's documentation, the model is \u003cstrong\u003eENERGY STAR\u003c\/strong\u003e certified, UL listed, C.E.C. listed and meets NAECA requirements.\u003c\/p\u003e\n\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\n\u003cp\u003eThe unit is factory-wired for a 240 V\/208 V single-phase supply, with interlocked elements. At 240 V, each backup element is 4,000 W. The existing tank circuit can often be reused, but we always check it: the breaker and conductor sizes are confirmed during the assessment, based on the unit's nameplate and the Code. Electrical connections are made under our RBQ licence 5645-9605-01, which covers ventilation, refrigeration and electrical work.\u003c\/p\u003e\n\u003ch3\u003eManufacturer's warranty\u003c\/h3\u003e\n\u003cp\u003eThis model carries the \"10\" suffix: Bradford White covers it with a 10-year limited warranty on the tank and 10 years on parts. The full warranty terms are provided with your quote.\u003c\/p\u003e\n\u003ch2\u003eInstallation of the Bradford White RE2H65T10-1NCTT by AirGreen in Greater Montreal\u003c\/h2\u003e\n\u003cp\u003eAirGreen is a family-owned heating and cooling company established in Montreal and active for more than fifteen years. Every project begins with a \u003cstrong\u003efree on-site estimate\u003c\/strong\u003e, followed by a \u003cstrong\u003ewritten quote\u003c\/strong\u003e. For this heat pump water heater, our work includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eassessing the location: air volume, clearances, headroom, access and a drain for condensate;\u003c\/li\u003e\n\u003cli\u003echecking the electrical circuit and upgrading it if needed;\u003c\/li\u003e\n\u003cli\u003edraining, disconnecting and removing the old tank;\u003c\/li\u003e\n\u003cli\u003econnecting the cold and hot water lines in 3\/4 in., with the relief valve and its discharge line;\u003c\/li\u003e\n\u003cli\u003ethe electrical connection and the condensate drain line;\u003c\/li\u003e\n\u003cli\u003ecommissioning, selecting the mode and setting the temperature;\u003c\/li\u003e\n\u003cli\u003emaintenance advice tailored to how you use hot water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance that keeps the heat pump efficient\u003c\/h3\u003e\n\u003cp\u003eA heat pump water heater needs little maintenance, but a few steps matter. The air intake and the evaporator must stay clear and clean so the heat pump gets enough air. A partial flush through the brass drain valve removes sediment, and periodic inspection of the anode protects the tank. We recommend one maintenance visit per year, especially in areas where the water is harder.\u003c\/p\u003e\n\u003ch3\u003eService area\u003c\/h3\u003e\n\u003cp\u003eWe install this model in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e and \u003cstrong\u003eLongueuil\u003c\/strong\u003e, as well as in Brossard, Boucherville, Saint-Lambert, Terrebonne, Blainville and throughout the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e and the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e. Payments can be spread out through our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing\u003c\/a\u003e program, presented with the quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest your free estimate for the Bradford White RE2H65T10-1NCTT.\u003c\/strong\u003e Send us a few photos of your current tank and its location: we will schedule the visit and give you a clear written quote.\u003c\/p\u003e","brand":"Bradford White","offers":[{"title":"Default Title","offer_id":67801413648676,"sku":"RE2H65T10-1NCTT","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/CHAUFFE_EAU_THERMODYNAMIQUE_BRADFORD_WHITE_AEROTHERM_RE2H_RE2H65T10_1NCTT_65_GAL_US_00_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1793082279","url":"https:\/\/airgreen.ca\/en\/products\/chauffe-eau-thermodynamique-bradford-white-re2h65t10-1nctt-65-gallons-montreal-laval-longueuil-rive-sud-rive-nord","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}