{"product_id":"mini-split-york-serie-x-23-seer-12000-btu-220v","title":"YORK X Series Mini Split 23 SEER | 12000 BTU 220V","description":"\u003ch2 class=\"PDq2pG_selectionAnchorContainer\"\u003eA 12,000 BTU YORK wall-mounted heat pump whose technical details matter just as much as the series name\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYORK Series X 12,000 BTU 220V Mini Split\u003c\/strong\u003e is a single-zone wall-mounted heat pump consisting of the \u003cstrong\u003eDHX12NWB21S\u003c\/strong\u003e indoor unit and the \u003cstrong\u003eDHX12CSB21S\u003c\/strong\u003e outdoor unit. For a homeowner in \u003cstrong\u003eMontreal, Laval, Longueuil, the North Shore, or the South Shore\u003c\/strong\u003e, this combination may be appealing when only one zone needs to be heated and cooled without installing a duct network.\u003c\/p\u003e\n\u003cp\u003eThe YORK brochure classifies this family among the \u003cstrong\u003eSeries X, up to 23 SEER\u003c\/strong\u003e single-zone systems and expressly confirms that the DHX12NWB21S \/ DHX12CSB21S pair is available in a \u003cstrong\u003e12,000 BTU\/h, 208\/230 V\u003c\/strong\u003e version. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis clarification is important because YORK also marketed a 12,000 BTU version of the Series X operating at 115 V. When we prepare a \u003cstrong\u003ewall-mounted heat pump installation\u003c\/strong\u003e, we always work from the complete model number rather than relying solely on “YORK Series X 12,000 BTU.” The model suffix confirms the power supply, piping, condenser specifications, and performance data.\u003c\/p\u003e\n\u003ch3\u003eSeries X “23 SEER”: what the brochure states for this specific model\u003c\/h3\u003e\n\u003cp\u003eThe commercial name \u003cstrong\u003eSeries X 23 SEER\u003c\/strong\u003e refers to a product line that can reach 23 SEER. However, for the exact \u003cstrong\u003eDHX12NWB21S \/ DHX12CSB21S combination at 208\/230 V\u003c\/strong\u003e, the 2020 YORK brochure publishes the following values:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRated cooling capacity: 12,000 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCooling range: 3,099 to 12,999 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated heating capacity: 13,000 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeating range: 2,400 to 14,000 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEER: 12.5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSEER: 22\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHSPF: 10.1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply: 208\/230 V, single-phase, 60 Hz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated cooling current: 4.5 A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated heating current: 5.5 A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMCA: 9 A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMOCP: 15 A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndoor airflow: 400 \/ 318 \/ 241 \/ 194 CFM\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndoor sound pressure: 45 \/ 39 \/ 35 \/ 29 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndoor dimensions: 33 × 11 × 8 in\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutdoor sound pressure: 54 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutdoor dimensions: 33 × 21 × 13 in\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRefrigerant: R-410A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePiping: 1\/4 in liquid and 1\/2 in gas\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrain: 5\/8 in\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum piping length: 65.5 ft, or approximately 20 m\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum elevation difference: 33 ft, or approximately 10 m\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCooling operation: down to -18 °C\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeating operation: down to -20 °C\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese values come from the table covering the Series X 208\/230 V models. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIt is therefore necessary to distinguish between \u003cstrong\u003ethe maximum rating of the X Series family\u003c\/strong\u003e and \u003cstrong\u003ethe rating of the specific 12,000 BTU 220 V model\u003c\/strong\u003e. For this combination, the documentation provided indicates \u003cstrong\u003e22 SEER\u003c\/strong\u003e, not 23 SEER. At AirGreen, we consider this distinction essential when a customer compares several heat pumps based on their energy efficiency.\u003c\/p\u003e\n\u003ch3\u003eA nominal capacity of 12,000 BTU does not mean constant operation at 12,000 BTU\u003c\/h3\u003e\n\u003cp\u003eThe compressor uses \u003cstrong\u003eInverter\u003c\/strong\u003e technology. The unit therefore does not need to constantly operate at its full nominal capacity.\u003c\/p\u003e\n\u003cp\u003eThe brochure gives an approximate cooling range of \u003cstrong\u003e3,099 to 12,999 BTU\/h\u003c\/strong\u003e. In heating, the range extends from \u003cstrong\u003e2,400 to 14,000 BTU\/h\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis modulation is particularly relevant during milder spring and fall days. When a room approaches its setpoint temperature, the system can reduce its output instead of repeatedly cycling through complete starts and stops.\u003c\/p\u003e\n\u003cp\u003eIn an \u003cstrong\u003eHVAC installation in Montréal or Laval\u003c\/strong\u003e, this behavior can help maintain a more stable temperature in a living room, an open floor, a work area, or a dwelling. However, the result depends directly on proper sizing.\u003c\/p\u003e\n\u003cp\u003eInstalling a 12,000 BTU unit in an area that requires much less capacity is not automatically advantageous. Conversely, asking a 12,000 BTU wall-mounted unit to handle several rooms separated by doors and hallways can lead to significant temperature differences.\u003c\/p\u003e\n\u003ch3\u003eHeating at -20 °C: an operating limit, not a guaranteed capacity of 13,000 BTU\u003c\/h3\u003e\n\u003cp\u003eThe YORK brochure indicates a heating operating range from \u003cstrong\u003e-20 °C to 24 °C\u003c\/strong\u003e for the DHX12CSB21S model. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe meaning of this data must be stated precisely. \u003cstrong\u003e-20 °C is the published outdoor operating limit for heating\u003c\/strong\u003e. This does not mean that the heat pump will still automatically provide its nominal 13,000 BTU\/h at -20 °C.\u003c\/p\u003e\n\u003cp\u003eThe AirGreen product sheet also lists heating capacities of \u003cstrong\u003e10,400 BTU at -8 °C\u003c\/strong\u003e and \u003cstrong\u003e9,100 BTU at -15 °C\u003c\/strong\u003e. These figures are much more useful than a simple minimum temperature when assessing how a heat pump will perform in the Greater Montréal climate.\u003c\/p\u003e\n\u003cp\u003eIn a home in \u003cstrong\u003eLongueuil, Boucherville, Terrebonne, Laval, or Montréal\u003c\/strong\u003e, heating needs increase precisely when the outdoor temperature drops. The available capacity at -8 °C and -15 °C must therefore be compared with the zone’s actual heat losses.\u003c\/p\u003e\n\u003cp\u003eThat is why we never determine the suitability of a heat pump solely based on the statement “heats down to -20 °C.”\u003c\/p\u003e\n\u003ch3\u003eAn interesting unit for one well-defined zone\u003c\/h3\u003e\n\u003cp\u003eThe X Series is designed as a \u003cstrong\u003esingle-zone\u003c\/strong\u003e system: one outdoor unit is paired with one indoor unit. YORK specifically describes this architecture as a solution intended for the heating and cooling needs of a single indoor space. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn practice, a 12,000 BTU unit may be considered for different types of spaces, but we always analyze the actual layout.\u003c\/p\u003e\n\u003cp\u003eA moderately sized open ground floor can allow good air circulation. A home with a large central living room may also be a logical candidate. A bedroom with a very high ceiling, extensive glazing and strong solar exposure, however, has a very different load from a well-insulated interior bedroom.\u003c\/p\u003e\n\u003cp\u003eThe number of square feet is therefore only one of several factors. We also consider \u003cstrong\u003einsulation, glazing, orientation, floor, ceiling height, air infiltration, sunlight and airflow between rooms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eFour airflow speeds and indoor operation as quiet as 29 dB(A)\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDHX12NWB21S\u003c\/strong\u003e indoor unit provides four airflow levels: \u003cstrong\u003e400, 318, 241 and 194 CFM\u003c\/strong\u003e. Its sound pressure ranges from \u003cstrong\u003e45 dB(A) at high speed to 29 dB(A) at the lowest setting\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis range gives us a better idea of the unit’s actual behavior than a single minimum value.\u003c\/p\u003e\n\u003cp\u003eAt low load, the system can operate at a quieter speed. When the room quickly requires more heating or cooling, the fan must move more air and naturally becomes more noticeable.\u003c\/p\u003e\n\u003cp\u003eFor a \u003cstrong\u003eheat pump installation in a bedroom\u003c\/strong\u003e, we pay particular attention to the direction of the airflow. Even a relatively quiet unit can become uncomfortable if it is installed directly above the bed or continuously blows air toward the sleeping area.\u003c\/p\u003e\n\u003cp\u003eIn a living room, the challenge is different: we often seek to achieve the best possible reach toward adjacent areas without directing the airflow straight at occupants.\u003c\/p\u003e\n\u003ch3\u003eAutomatic horizontal and vertical louvers\u003c\/h3\u003e\n\u003cp\u003eThe AirGreen product sheet indicates \u003cstrong\u003eautomatic control of the vertical and horizontal louvers\u003c\/strong\u003e. This feature makes it possible to change the direction of the air stream without manually repositioning the fins each time.\u003c\/p\u003e\n\u003cp\u003eThe general X Series documentation also describes functions related to airflow control, and YORK describes the control center as allowing users to manage the temperature, mode, fan speed, and airflow direction. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn a larger space, this feature can improve air distribution by preventing a single part of the room from continuously receiving most of the airflow.\u003c\/p\u003e\n\u003ch3\u003eWi-Fi is optional, and the appropriate adapter is required\u003c\/h3\u003e\n\u003cp\u003eOne detail comes up regularly in our conversations with homeowners: \u003cstrong\u003e“Can I control my YORK with my phone?”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor this X Series model, Wi-Fi is \u003cstrong\u003eoptional\u003c\/strong\u003e. YORK identifies the \u003cstrong\u003eCS532AH\u003c\/strong\u003e adapter as a required accessory. The \u003cstrong\u003eDRCPX\u003c\/strong\u003e wireless remote, on the other hand, comes standard with P and X Series units. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe app indicated in this documentation is the \u003cstrong\u003eEWPE Smart App\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis point should be verified before installation when a customer considers phone control essential. A “Wi-Fi compatible” statement is not equivalent to “Wi-Fi module included.”\u003c\/p\u003e\n\u003ch3\u003eConstruction and features designed for a residential mini-split\u003c\/h3\u003e\n\u003cp\u003eThe page dedicated to the X Series highlights the \u003cstrong\u003ehigh-efficiency Inverter technology\u003c\/strong\u003e, a heavy-gauge steel structure, quiet operation, room-temperature display on the indoor unit, and a corrosion-resistant coating. YORK also emphasizes that the system defrosts as needed rather than according to a rigid schedule, which is intended to reduce energy consumption associated with defrost cycles. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor Quebec’s climate, defrosting deserves particular attention. When the outdoor unit operates in heating mode during cold, humid weather, frost can accumulate on the outdoor coil. The system must periodically remove this buildup to maintain heat exchange.\u003c\/p\u003e\n\u003cp\u003eDuring a \u003cstrong\u003eHVAC service call\u003c\/strong\u003e, a homeowner may sometimes interpret a temporary change in operation during winter as a breakdown when it is simply a normal defrost cycle. Proper installation must also allow the water produced by this defrosting to drain away without creating a block of ice beneath the unit.\u003c\/p\u003e\n\u003ch2\u003eInstallation in Montreal, Laval, Longueuil, the North Shore, and the South Shore: the details that influence the outcome\u003c\/h2\u003e\n\u003ch3\u003eThe 1\/4 in – 1\/2 in piping is a critical detail when replacing equipment\u003c\/h3\u003e\n\u003cp\u003eThe DHX12CSB21S uses a \u003cstrong\u003e1\/4 in liquid line\u003c\/strong\u003e and a \u003cstrong\u003e1\/2 in gas line\u003c\/strong\u003e. The maximum total length is \u003cstrong\u003e65.5 feet\u003c\/strong\u003e, with a maximum elevation difference of \u003cstrong\u003e33 feet\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003e1\/2 in diameter on the gas side\u003c\/strong\u003e deserves careful checking when replacing an old heat pump.\u003c\/p\u003e\n\u003cp\u003eHere is a scenario we regularly encounter in HVAC work: a homeowner already has a wall-mounted unit, the lines are hidden behind trim, and they wish to keep the entire existing installation. The mere fact that the pipes “look like” those of the new unit is not enough.\u003c\/p\u003e\n\u003cp\u003eWe check the actual diameters, the condition of the copper, the length, the routing, and compatibility with the new unit. Automatically reusing a 3\/8 in gas line for a unit that requires \u003cstrong\u003e1\/2 po\u003c\/strong\u003e is not good practice.\u003c\/p\u003e\n\u003cp\u003eThis verification can prevent performance, oil return, refrigerant pressure, and long-term reliability problems.\u003c\/p\u003e\n\u003ch3\u003e220 V simplifies certain projects, but the circuit must remain compliant with the manufacturer's data\u003c\/h3\u003e\n\u003cp\u003eThis version of the YORK Series X is powered by \u003cstrong\u003e208\/230 V\u003c\/strong\u003e. The brochure lists an \u003cstrong\u003eMCA of 9 A\u003c\/strong\u003e and an \u003cstrong\u003eMOCP of 15 A\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMCA refers to the minimum circuit ampacity required by the equipment. MOCP establishes the maximum overcurrent protection based on the manufacturer's data.\u003c\/p\u003e\n\u003cp\u003eWhen replacing equipment, the presence of an old 240 V circuit does not allow us to immediately conclude that everything can be kept. The wiring, protection, disconnect switch, and entire connection must be compatible with the new equipment and applicable requirements.\u003c\/p\u003e\n\u003cp\u003eThis is also why it is useful to have the \u003cstrong\u003eexact model numbers before installation day\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e33 inches of width indoors: wall selection remains important\u003c\/h3\u003e\n\u003cp\u003eThe indoor unit measures approximately \u003cstrong\u003e33 × 11 × 8 in\u003c\/strong\u003e. This size is relatively compact for a 12,000 BTU wall-mounted unit, but the space available on the wall is not the only criterion.\u003c\/p\u003e\n\u003cp\u003eWe must also consider the necessary clearances, access to the filters, the possibility of carrying out \u003cstrong\u003ewall-mounted heat pump cleaning\u003c\/strong\u003e, the drain route, the piping layout, and the projected airflow.\u003c\/p\u003e\n\u003cp\u003eA location that looks ideal in a photo may be less suitable on-site if a beam, plumbing drainpipe, electrical panel, or exterior constraint is located behind the wall.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHVAC installation\u003c\/strong\u003e must be designed as a whole, from the indoor evaporator to the outdoor condenser.\u003c\/p\u003e\n\u003ch3\u003eThe 33 × 21 × 13 in. condenser and winter management\u003c\/h3\u003e\n\u003cp\u003eThe outdoor unit measures approximately \u003cstrong\u003e33 in. wide, 21 in. deep, and 13 in. high\u003c\/strong\u003e, with a published sound pressure level of \u003cstrong\u003e54 dB(A)\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn \u003cstrong\u003eMontreal, Laval, and Longueuil\u003c\/strong\u003e, we must consider snow, ice, drainage, and proximity to windows or neighboring properties.\u003c\/p\u003e\n\u003cp\u003eInstalling the condenser too low can increase the risk of snow accumulating around the heat exchanger. Placing it in an area where defrost water remains trapped can create a mass of ice beneath the unit. A location too close to a bedroom can also make outdoor noise more noticeable at night.\u003c\/p\u003e\n\u003cp\u003eThe quality of an installation is therefore not measured solely by the appearance of the decorative line sets.\u003c\/p\u003e\n\u003ch3\u003eR-410A: a previous-generation platform that must be serviced according to its own specifications\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDHX12CSB21S uses R-410A\u003c\/strong\u003e. The brochure specifies a refrigerant charge of 47.61 oz, or approximately 1.4 kg for this model. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe type of refrigerant is particularly important for servicing and repairs. Practices applicable to different refrigerants must never be mixed, and the gas used should not be assumed simply because two condensers appear similar.\u003c\/p\u003e\n\u003cp\u003eDuring an \u003cstrong\u003eHVAC service call or diagnostic\u003c\/strong\u003e, the nameplate and manufacturer information remain the primary references.\u003c\/p\u003e\n\u003ch3\u003eENERGY STAR: a difference between the 2020 brochure and the current product sheet that must be noted\u003c\/h3\u003e\n\u003cp\u003eOne documentary point deserves particular attention.\u003c\/p\u003e\n\u003cp\u003eThe AirGreen product sheet currently indicates \u003cstrong\u003eENERGY STAR: No\u003c\/strong\u003e and \u003cstrong\u003eENERGY STAR Cold Climate: No\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eHowever, the 2020 YORK brochure includes a note stating that all models shown on the X Series page were ENERGY STAR certified, with the exception of the 18,000 BTU models \u003cstrong\u003eDHX18NWB21S and DHX18CSB21S\u003c\/strong\u003e. According to this historical brochure, the 12,000 BTU 220 V model was therefore among the models identified as ENERGY STAR certified at that time. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese two sources do not necessarily describe the same certification status at the same time.\u003c\/p\u003e\n\u003cp\u003eFor a \u003cstrong\u003ecurrent Hydro-Québec or LogisVert subsidy\u003c\/strong\u003e, never rely solely on an old catalog. We must verify the current eligibility of the AHRI number and exact combination at the time of the project. The AirGreen listing provided mentions \u003cstrong\u003eAHRI 8578573\u003c\/strong\u003e and currently shows no provincial subsidy amount for this combination.\u003c\/p\u003e\n\u003cp\u003eThis is particularly relevant for homeowners comparing an older R-410A unit with a recent cold-climate-certified heat pump.\u003c\/p\u003e\n\u003ch3\u003eThe DHX12NWB21S indoor unit also appears in multizone systems: do not confuse the pairings\u003c\/h3\u003e\n\u003cp\u003eOne more technical detail can help avoid incorrect parts and documentation searches: \u003cstrong\u003eDHX12NWB21S\u003c\/strong\u003e also appears in the YORK catalog as a compatible wall-mounted indoor unit for certain W Series multizone systems. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn the product discussed here, it is paired with condenser \u003cstrong\u003eDHX12CSB21S\u003c\/strong\u003e, forming the \u003cstrong\u003e12,000 BTU 208\/230 V Single-Zone X Series\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis distinction becomes important when a homeowner is looking for a manual, circuit board, remote control, or warranty information. The indoor unit number alone is not always enough to identify the entire installed configuration.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, we check both nameplates when a question depends on the exact pairing.\u003c\/p\u003e\n\u003ch3\u003eMaintenance: symptoms not to attribute immediately to the compressor\u003c\/h3\u003e\n\u003cp\u003eTo maintain good airflow, filters must remain clean, and the indoor heat exchanger must not gradually become dirty. An airflow restriction can reduce comfort, increase operating time, and give the impression that the heat pump has lost capacity.\u003c\/p\u003e\n\u003cp\u003eThe same principle applies to the condenser. Dust, debris, outdoor buildup, and ice can hinder heat exchange.\u003c\/p\u003e\n\u003cp\u003eWhen a customer tells us that their heat pump “isn’t heating as well as before,” we do not begin by assuming that the compressor needs to be replaced. We first examine the installation’s overall condition, airflow, temperatures, pressures, heat exchangers, controls, and system performance.\u003c\/p\u003e\n\u003cp\u003eThe YORK brochure also outlines diagnostic, defrost, and control functions that must be taken into account before concluding that there is a major failure.\u003c\/p\u003e\n\u003ch3\u003eWarranty: system registration is a document to keep\u003c\/h3\u003e\n\u003cp\u003eYORK documentation from this generation indicates a standard warranty of \u003cstrong\u003e7 years on the compressor and 5 years on parts\u003c\/strong\u003e, with the possibility of obtaining \u003cstrong\u003e10 years on the compressor and 10 years on parts\u003c\/strong\u003e for certain residential installations registered in accordance with the manufacturer's conditions. Ten-year labour coverage was also presented as a separate option requiring an additional purchase. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe AirGreen information sheet indicates \u003cstrong\u003e10-10-0 years\u003c\/strong\u003e for the compressor, parts, and labour, with an additional warranty potentially available.\u003c\/p\u003e\n\u003cp\u003eIt is therefore important to keep the installation invoice, serial numbers, and any registration confirmation. A warranty stated on a product sheet remains subject to the conditions applicable to the system actually installed.\u003c\/p\u003e\n\u003ch3\u003eFor which customer does this YORK X Series 12,000 BTU make the most sense?\u003c\/h3\u003e\n\u003cp\u003eThis \u003cstrong\u003eYORK ductless heat pump\u003c\/strong\u003e is primarily intended for a single-zone project where a capacity of approximately 12,000 BTU truly meets the requirements.\u003c\/p\u003e\n\u003cp\u003eIt can be a coherent solution when a homeowner prioritizes a 208\/230 V Inverter system, a relatively compact indoor unit, a heating operating range down to -20 °C, optional Wi-Fi, and a ductless installation.\u003c\/p\u003e\n\u003cp\u003eIt is less obvious for a project where the top priority is a \u003cstrong\u003ecurrent cold-climate certification\u003c\/strong\u003e, a significant LogisVert rebate, or high heating capacity at the lowest winter temperatures. In that case, comparing this YORK with newer models may be worthwhile before making a decision.\u003c\/p\u003e\n\u003cp\u003eThat is precisely the role we play at \u003cstrong\u003eAirGreen Heat Pumps, Air Conditioning \u0026amp; Heating\u003c\/strong\u003e: not choosing a unit solely because its BTU rating seems to match the square footage, but analyzing the complete system and its installation context.\u003c\/p\u003e\n\u003ch3\u003eHave AirGreen review your project before choosing the capacity\u003c\/h3\u003e\n\u003cp\u003eFor a \u003cstrong\u003eYORK heat pump installation in Montreal, Laval, Longueuil, on the North Shore, South Shore, or in Montérégie\u003c\/strong\u003e, we can verify the required capacity, indoor and outdoor placement, piping, electrical circuit, and building-specific constraints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for a quote, a comparison with other ductless heat pumps, or technical validation before installation.\u003c\/strong\u003e A good choice starts with the exact model, but also with an installation designed around the actual building.\u003c\/p\u003e","brand":"York","offers":[{"title":"Default Title","offer_id":56120414404900,"sku":"DHX12CSB21S","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/00_MINI_SPLIT_YORK_SERIE_X_12000_BTU_220V_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD_4bd4eb50-1e11-4a91-a6e4-0ee8523d2ff8.png?v=1789426029","url":"https:\/\/airgreen.ca\/en\/products\/mini-split-york-serie-x-23-seer-12000-btu-220v","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}