{"product_id":"ptac-senville-r32-12000-btu-montreal-laval-rive-sud","title":"PTAC SENVILLE R32 | 12000 BTU | Montreal, Laval, South Shore","description":"\u003ch2 class=\"PDq2pG_selectionAnchorContainer\"\u003eA 12,000 BTU PTAC designed for bedrooms, apartments, and spaces where a standalone unit truly simplifies installation\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e12,000 BTU SENVILLE SENPT-12AEN PTAC\u003c\/strong\u003e belongs to a category of HVAC systems that is very different from a conventional wall-mounted heat pump. Here, the evaporator, condenser, compressor, and fan are all integrated into a single unit passing through the exterior wall. No refrigerant line set between an indoor unit and an outdoor unit is required.\u003c\/p\u003e\n\u003cp\u003eThis design explains why \u003cstrong\u003ePTACs\u003c\/strong\u003e remain particularly attractive for certain hotels, rental buildings, apartments, studios, residences, and buildings where each room must be able to operate independently.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, when we evaluate a replacement or new installation of a \u003cstrong\u003ePTAC in Montreal, Laval, Longueuil, the South Shore, or the North Shore\u003c\/strong\u003e, we do not look only at the 12,000 BTU rating. A PTAC must be selected based on its wall opening, electrical supply, existing sleeve, outdoor grille, expected sound level, and above all its actual heating capacity in Quebec temperatures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENVILLE SENPT-12AEN\u003c\/strong\u003e uses \u003cstrong\u003eR32 refrigerant\u003c\/strong\u003e, operates on a \u003cstrong\u003e208\/230 V single-phase, 60 Hz\u003c\/strong\u003e power supply, and combines three important functions: cooling, heat pump heating, and \u003cstrong\u003e3.5 kW\u003c\/strong\u003e auxiliary electric heating. The manufacturer also indicates a remote control, a digital LED panel, and compatibility with a smart control kit. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eThe main features of the SENVILLE SENPT-12AEN\u003c\/h3\u003e\n\u003cp\u003eHere is the data we consider most important for properly analyzing this PTAC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel: SENPT-12AEN\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated cooling capacity: 12,000 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat pump heating capacity: up to 10,800 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectric heating: 3.5 kW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRefrigerant: R32\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply: 208\/230 V, single-phase, 60 Hz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug: 20 A with built-in resettable circuit breaker\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum airflow: 438 CFM\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEER2: 10.5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdvertised COP: 3.2\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital LED control panel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSmart kit listed as included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions: 42.01 × 20.91 × 15.98 in\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndoor sound level: 51.5 to 52 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutdoor sound level: 67 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer’s warranty listed by AirGreen: 10-10-0\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional warranty: available depending on the option selected\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe technical table in the documentation indicates a cooling capacity of \u003cstrong\u003e12,000 BTU\/h at 230 V and 11,800 BTU\/h at 208 V\u003c\/strong\u003e, with cooling power consumption of only \u003cstrong\u003e1,040 \/ 1,020 W\u003c\/strong\u003e depending on the supply voltage. The corresponding current is \u003cstrong\u003e5.3 \/ 5.8 A\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAn important detail: 12,000 BTU in cooling does not mean 12,000 BTU of heating under all conditions\u003c\/h3\u003e\n\u003cp\u003eThis is a distinction we often explain when preparing an HVAC quote.\u003c\/p\u003e\n\u003cp\u003eIn cooling mode, the SENPT-12AEN provides up to \u003cstrong\u003e12,000 BTU\/h\u003c\/strong\u003e. In heat pump mode, the stated capacity is \u003cstrong\u003e10,800 \/ 10,500 BTU\/h\u003c\/strong\u003e, with power consumption of \u003cstrong\u003e890 \/ 850 W\u003c\/strong\u003e and current of \u003cstrong\u003e5.0 \/ 5.3 A\u003c\/strong\u003e. The manufacturer specifies a \u003cstrong\u003eCOP of 3.2\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis means that under conditions where the heat pump can operate normally, it produces several units of heat for every unit of electricity consumed. This is precisely the energy advantage of a heat pump over a resistive electric element.\u003c\/p\u003e\n\u003cp\u003eHowever, the PTAC also has a \u003cstrong\u003e3.5 kW electric heating element\u003c\/strong\u003e. Its stated capacity reaches \u003cstrong\u003e10,900 \/ 8,900 BTU\/h\u003c\/strong\u003e, with power consumption of \u003cstrong\u003e3,500 \/ 2,897 W\u003c\/strong\u003e and current of \u003cstrong\u003e15.3 \/ 13.7 A\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe difference is significant: electric heating consumes practically as much electricity as the heat it produces, whereas a heat pump moves heat from outdoors to indoors.\u003c\/p\u003e\n\u003ch3\u003eThis PTAC is not a low-temperature heat pump rated for -25 °C or -30 °C\u003c\/h3\u003e\n\u003cp\u003eFor the \u003cstrong\u003eMontréal and Greater Montréal\u003c\/strong\u003e market, this point deserves particular attention.\u003c\/p\u003e\n\u003cp\u003eThe SENPT-12AEN documentation indicates an outdoor operating range of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ecooling: 64 to 109 °F\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eheating: 23 to 76 °F\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe manufacturer also specifies a charge of \u003cstrong\u003e26.81 oz of R32\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn other words, the published lower operating limit in heating mode is approximately \u003cstrong\u003e23 °F\u003c\/strong\u003e, which is slightly below the freezing point.\u003c\/p\u003e\n\u003cp\u003eWe therefore would not present this model as equivalent to a cold-climate wall-mounted heat pump that can maintain heating at -25 °C or -30 °C.\u003c\/p\u003e\n\u003cp\u003eIn a Montréal building, the overall heating system must be planned accordingly. The PTAC does include an electric element, but a homeowner replacing a primary heating system must have the following properly assessed:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe room's heating load;\u003c\/li\u003e\n\u003cli\u003ewall insulation;\u003c\/li\u003e\n\u003cli\u003ethe windows;\u003c\/li\u003e\n\u003cli\u003ewind exposure;\u003c\/li\u003e\n\u003cli\u003ethe floor area;\u003c\/li\u003e\n\u003cli\u003ethe existing heating system;\u003c\/li\u003e\n\u003cli\u003ethe needs during periods of intense cold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is exactly the kind of detail that prevents selecting equipment solely because the label says “heat pump.”\u003c\/p\u003e\n\u003ch3\u003e438 CFM: why airflow matters as much as BTUs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eindoor airflow reaches 438 CFM at high speed and 344 CFM at low speed\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCFM, or \u003cem\u003ecubic feet per minute\u003c\/em\u003e, indicates the volume of air moved by the fan.\u003c\/p\u003e\n\u003cp\u003eFor a PTAC, adequate airflow helps to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003edistribute cool air more quickly throughout a room;\u003c\/li\u003e\n\u003cli\u003ereduce temperature differences between two zones;\u003c\/li\u003e\n\u003cli\u003eimprove heat transfer across the heat exchanger;\u003c\/li\u003e\n\u003cli\u003elimit excessively short cycles when the installation is properly sized;\u003c\/li\u003e\n\u003cli\u003emaintain acceptable air circulation in relatively long rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHowever, more CFM does not automatically mean greater comfort.\u003c\/p\u003e\n\u003cp\u003eThe PTAC’s position is decisive. If a unit is installed behind a sofa, bed, piece of furniture, or thick curtain, some of the airflow may be short-circuited. The cool or warm air then returns too quickly to the unit’s intake without actually treating the entire room.\u003c\/p\u003e\n\u003cp\u003eThis is a problem we seek to eliminate during the planning stage.\u003c\/p\u003e\n\u003ch3\u003eSound level: 51.5 to 52 dB(A) indoors\u003c\/h3\u003e\n\u003cp\u003eA PTAC has its compressor in the same housing as the indoor unit. Therefore, it cannot be directly compared with the sound level of a wall-mounted unit whose compressor is located outside.\u003c\/p\u003e\n\u003cp\u003eFor the SENPT-12AEN, Senville indicates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e51.5 dB(A) at low speed\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e52 dB(A) at high speed\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67 dB(A) on the outdoor side\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe difference of only 0.5 dB between the two indoor speeds also shows that the total noise does not come solely from the fan. The mechanical assembly contributes to the sound level.\u003c\/p\u003e\n\u003cp\u003eIn a hotel room, studio apartment, or bedroom, we always consider the location of the bed and the distance between the occupant and the PTAC. Two installations with exactly the same unit can create a very different perception of sound simply because of the room layout.\u003c\/p\u003e\n\u003ch3\u003eR32: important information for a new generation of PTACs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENVILLE SENPT-12AEN operates with R32 refrigerant\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe documentation indicates a charge of \u003cstrong\u003e26.81 oz\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor the owner, this mainly means that installation, diagnostics, and any necessary repairs must be carried out using tools and procedures appropriate for the refrigerant used.\u003c\/p\u003e\n\u003cp\u003eR32 belongs to the class of mildly flammable refrigerants. This does not make the unit problematic in a compliant installation, but it requires following the appropriate technical procedures when servicing the refrigeration circuit.\u003c\/p\u003e\n\u003cp\u003eSince the PTAC is a factory-precharged self-contained unit, a standard installation does not require connecting a copper \u003cem\u003elineset\u003c\/em\u003e as with a wall-mounted heat pump.\u003c\/p\u003e\n\u003cp\u003eThis is one of the practical advantages of the PTAC format.\u003c\/p\u003e\n\u003ch2\u003eInstalling a SENVILLE 12,000 BTU PTAC in Quebec: the details that really determine the outcome\u003c\/h2\u003e\n\u003ch3\u003eReplacement in an existing PTAC opening: the most advantageous scenario\u003c\/h3\u003e\n\u003cp\u003eThe SENPT-12AEN uses a standard PTAC format, and Senville indicates compatibility with standard PTAC wall openings. For a new installation, the \u003cstrong\u003ewall sleeve and exterior grille are sold separately\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis information changes a lot of things on a job site.\u003c\/p\u003e\n\u003cp\u003eWhen replacing a unit in an existing hotel or building, we check the following before ordering:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ethe exact dimensions of the existing unit\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003ethe sleeve’s width and height;\u003c\/li\u003e\n\u003cli\u003ethe wall depth;\u003c\/li\u003e\n\u003cli\u003ethe condition of the exterior grille;\u003c\/li\u003e\n\u003cli\u003ethe slope of the casing;\u003c\/li\u003e\n\u003cli\u003eair infiltration around the opening;\u003c\/li\u003e\n\u003cli\u003ethe existing electrical supply;\u003c\/li\u003e\n\u003cli\u003ethe space in front of the air intakes and outlets.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe SENPT-12AEN measures \u003cstrong\u003e42.01 in. wide × 20.91 in. deep × 15.98 in. high\u003c\/strong\u003e and weighs approximately \u003cstrong\u003e110.23 lb net\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEven when an opening appears standard, a few millimeters or a deformation in an old sleeve can complicate the replacement.\u003c\/p\u003e\n\u003cp\u003eA proper installation must also prevent water infiltration, drafts, and vibrations transmitted to the wall.\u003c\/p\u003e\n\u003ch3\u003eReplacing a PTAC is not simply a matter of “removing the old one and sliding in the new one”\u003c\/h3\u003e\n\u003cp\u003eThis is a common mistake in buildings where PTACs have been installed for fifteen or twenty years.\u003c\/p\u003e\n\u003cp\u003eAn old casing may have:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecorrosion;\u003c\/li\u003e\n\u003cli\u003ea partially blocked exterior grille;\u003c\/li\u003e\n\u003cli\u003ea deformed sleeve;\u003c\/li\u003e\n\u003cli\u003edeteriorated sealing joints;\u003c\/li\u003e\n\u003cli\u003ean incorrect slope;\u003c\/li\u003e\n\u003cli\u003ean unsuitable electrical outlet;\u003c\/li\u003e\n\u003cli\u003ean opening that is too large;\u003c\/li\u003e\n\u003cli\u003ea poorly insulated interior finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReusing these components without inspection can negate some of the benefits of the new unit.\u003c\/p\u003e\n\u003cp\u003eFor example, an opening that continuously lets in cold air at -15 °C will increase the room’s heating needs even if the PTAC is working perfectly.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, we therefore consider \u003cstrong\u003ethe enclosure around the PTAC to be part of the HVAC installation\u003c\/strong\u003e, not merely a finishing detail.\u003c\/p\u003e\n\u003ch3\u003e208\/230 V power supply and 20 A outlet: verify before installation\u003c\/h3\u003e\n\u003cp\u003eThe Senville SENPT-12AEN operates on \u003cstrong\u003e208\/230 V single-phase at 60 Hz\u003c\/strong\u003e and has a \u003cstrong\u003e20 A outlet with integrated reset protection\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis feature is particularly important when replacing an older unit.\u003c\/p\u003e\n\u003cp\u003eCooling mode requires relatively little current, but electric heating can reach \u003cstrong\u003e15.3 A\u003c\/strong\u003e, depending on the voltage. Therefore, you should never rely solely on the compressor’s power consumption to determine whether the existing power supply is suitable.\u003c\/p\u003e\n\u003cp\u003eBefore installation, we verify the actual electrical configuration.\u003c\/p\u003e\n\u003cp\u003eIn a building with several dozen PTACs, this question becomes even more important: multiple 3.5 kW electric heating elements operating simultaneously represent a considerable load for the building’s electrical system.\u003c\/p\u003e\n\u003ch3\u003ePTAC or ductless heat pump: the two solutions meet different needs\u003c\/h3\u003e\n\u003cp\u003eFor a single-family home in \u003cstrong\u003eLaval, Longueuil, or on the South Shore\u003c\/strong\u003e, a cold-climate ductless heat pump will often be more appealing when efficient heating during the Quebec winter is the goal.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003eSENVILLE PTAC\u003c\/strong\u003e, however, becomes highly relevant when the objective is different.\u003c\/p\u003e\n\u003cp\u003eIt is particularly well suited to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea hotel room;\u003c\/li\u003e\n\u003cli\u003ean apartment requiring independent control;\u003c\/li\u003e\n\u003cli\u003ea multi-unit residence;\u003c\/li\u003e\n\u003cli\u003ea studio apartment;\u003c\/li\u003e\n\u003cli\u003ea room that already has a PTAC opening;\u003c\/li\u003e\n\u003cli\u003ea building where installing refrigerant lines would be difficult;\u003c\/li\u003e\n\u003cli\u003ea quick replacement of an existing terminal unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn these situations, its self-contained design greatly simplifies the installation.\u003c\/p\u003e\n\u003ch3\u003eA typical scenario we analyze at AirGreen\u003c\/h3\u003e\n\u003cp\u003eLet’s consider an apartment in a \u003cstrong\u003eMontreal\u003c\/strong\u003e building where an old 12,000 BTU PTAC needs to be replaced.\u003c\/p\u003e\n\u003cp\u003eThe room is a reasonable size for this capacity, but the owner also wants to use the new unit for heating.\u003c\/p\u003e\n\u003cp\u003eWe do not stop at the 12,000 BTU capacity.\u003c\/p\u003e\n\u003cp\u003eWe first check whether the existing opening is truly compatible. Then, we confirm the \u003cstrong\u003e208\/230 V and 20 A\u003c\/strong\u003e circuit. We inspect the condition of the exterior grille and the wall’s watertightness.\u003c\/p\u003e\n\u003cp\u003eWe then explain to the owner that the SENPT-12AEN provides approximately \u003cstrong\u003e10,800 BTU\/h in heat pump mode\u003c\/strong\u003e, but that the published heating range ends at \u003cstrong\u003e23 °F\u003c\/strong\u003e. For Montreal’s climate, it is therefore necessary to anticipate how the building will behave below this temperature and understand the role of electric heating.\u003c\/p\u003e\n\u003cp\u003eThis conversation avoids unrealistic expectations: buying a heat pump does not automatically mean getting a heat pump designed to operate at -30 °C.\u003c\/p\u003e\n\u003cp\u003eThis is precisely why we prefer to review the complete technical data sheet before approving a unit.\u003c\/p\u003e\n\u003ch3\u003eMaintenance of the SENPT-12AEN PTAC\u003c\/h3\u003e\n\u003cp\u003eA PTAC must be serviced regularly, particularly in rental buildings and hotels where it operates for several hours a day.\u003c\/p\u003e\n\u003cp\u003eWe particularly recommend monitoring:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ethe air filter\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003ethe indoor heat exchanger;\u003c\/li\u003e\n\u003cli\u003ethe outdoor heat exchanger;\u003c\/li\u003e\n\u003cli\u003eair intakes and outlets;\u003c\/li\u003e\n\u003cli\u003ethe outdoor grille;\u003c\/li\u003e\n\u003cli\u003edust accumulation;\u003c\/li\u003e\n\u003cli\u003esigns of water or condensation;\u003c\/li\u003e\n\u003cli\u003evibrations;\u003c\/li\u003e\n\u003cli\u003eabnormal changes in noise;\u003c\/li\u003e\n\u003cli\u003eheating and cooling capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA heavily soiled filter reduces airflow and may prevent the unit from properly delivering its available \u003cstrong\u003e438 CFM\u003c\/strong\u003e at high speed.\u003c\/p\u003e\n\u003cp\u003eA blocked outdoor heat exchanger causes another problem: since the condenser is integrated directly behind the wall, leaves, debris, or a blocked grille can hinder heat rejection.\u003c\/p\u003e\n\u003ch3\u003eThree signs that should prompt a technical inspection\u003c\/h3\u003e\n\u003ch4\u003eThe PTAC runs for a long time without reaching the set temperature\u003c\/h4\u003e\n\u003cp\u003eThis may be caused by a clogged filter, a dirty heat exchanger, a loss of cooling capacity, or simply a unit that is too small for the actual load.\u003c\/p\u003e\n\u003ch4\u003eThe air is warm, but the electricity bill is increasing sharply\u003c\/h4\u003e\n\u003cp\u003eIt is necessary to determine whether the unit is still heating primarily through the heat pump or whether the \u003cstrong\u003e3.5 kW\u003c\/strong\u003e electric element is operating much more often.\u003c\/p\u003e\n\u003cp\u003eThis distinction is particularly important in our climate.\u003c\/p\u003e\n\u003ch4\u003eThe noise or vibrations have increased\u003c\/h4\u003e\n\u003cp\u003eA PTAC weighing more than 110 lb installed in a poorly supported sleeve can transmit vibrations to the wall. An inspection can distinguish a mechanical problem from a support or installation problem.\u003c\/p\u003e\n\u003ch3\u003eWhich customers would AirGreen recommend the SENVILLE 12,000 BTU to?\u003c\/h3\u003e\n\u003cp\u003eWe consider this model particularly interesting when a customer is looking for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ean \u003cstrong\u003e12,000 BTU R32 PTAC\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003ea packaged solution;\u003c\/li\u003e\n\u003cli\u003ea replacement for an old standard PTAC;\u003c\/li\u003e\n\u003cli\u003ea unit capable of cooling and heating;\u003c\/li\u003e\n\u003cli\u003ean integrated electric heating system;\u003c\/li\u003e\n\u003cli\u003ea system powered by \u003cstrong\u003e208\/230 V\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003elocal control via remote control or digital panel;\u003c\/li\u003e\n\u003cli\u003ea solution suited to a hotel, apartment, or residence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHowever, when a customer is primarily looking for \u003cstrong\u003emain heating at very low temperatures\u003c\/strong\u003e, we compare this PTAC with cold-climate heat pumps better suited to Montréal winters.\u003c\/p\u003e\n\u003cp\u003eOur role is not to force one technology into every application. The right system is the one that matches the building, its use, and the actual operating conditions.\u003c\/p\u003e\n\u003ch3\u003eWhy have your PTAC installed or replaced by AirGreen\u003c\/h3\u003e\n\u003cp\u003eAt AirGreen, we serve \u003cstrong\u003eMontréal, Laval, Longueuil, the South Shore, the North Shore, and the Greater Montréal area\u003c\/strong\u003e for air conditioning, heating, heat pumps, and HVAC solutions.\u003c\/p\u003e\n\u003cp\u003eFor a project involving the \u003cstrong\u003eSENVILLE SENPT-12AEN PTAC\u003c\/strong\u003e, we can specifically check:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecompatibility with the wall opening;\u003c\/li\u003e\n\u003cli\u003ethe sleeve dimensions;\u003c\/li\u003e\n\u003cli\u003ethe outdoor grille;\u003c\/li\u003e\n\u003cli\u003ethe electrical supply;\u003c\/li\u003e\n\u003cli\u003erequired capacity;\u003c\/li\u003e\n\u003cli\u003ewinter operating conditions;\u003c\/li\u003e\n\u003cli\u003ethe condition of the existing installation;\u003c\/li\u003e\n\u003cli\u003econtrol requirements;\u003c\/li\u003e\n\u003cli\u003eaccess for future maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis approach avoids choosing a PTAC solely based on price or BTU capacity.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENVILLE SENPT-12AEN\u003c\/strong\u003e offers an interesting combination: \u003cstrong\u003e12,000 BTU cooling capacity, heat pump, 3.5 kW electric heating element, R32, maximum airflow of 438 CFM, and 208\/230 V power supply\u003c\/strong\u003e. The official documentation also confirms its standard PTAC format and the main electrical, acoustic, and dimensional parameters. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIts main advantage is its simplicity as a self-contained terminal unit. Its main limitation in the Quebec context is that its heat-pump heating range does not match that of a cold-climate heat pump designed to operate at -25 °C or -30 °C.\u003c\/p\u003e\n\u003cp\u003eThis is the difference we take into consideration before making every recommendation.\u003c\/p\u003e\n\u003ch3\u003eRequest a quote for your SENVILLE PTAC\u003c\/h3\u003e\n\u003cp\u003eDo you need to replace an old PTAC in an apartment, hotel, residence, or commercial building? \u003cstrong\u003eContact AirGreen\u003c\/strong\u003e for an assessment and quote. We can confirm whether the \u003cstrong\u003eSENVILLE SENPT-12AEN 12,000 BTU R32\u003c\/strong\u003e is truly suitable for your installation in \u003cstrong\u003eMontréal, Laval, Longueuil, the South Shore, or the North Shore\u003c\/strong\u003e and check the technical details before ordering and installation.\u003c\/p\u003e","brand":"Senville","offers":[{"title":"Default Title","offer_id":56120271765796,"sku":"SENPT-12AEN","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/00_PTAC_SENVILLE_R32_12000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1789067669","url":"https:\/\/airgreen.ca\/en\/products\/ptac-senville-r32-12000-btu-montreal-laval-rive-sud","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}