{"product_id":"ptac-senville-r32-15000-btu-montreal-laval-rive-sud","title":"PTAC SENVILLE R32 | 15000 BTU | Montreal, Laval, South Shore","description":"\u003ch2 class=\"PDq2pG_selectionAnchorContainer\"\u003eA 15,000 BTU PTAC designed for bedrooms, apartments, and commercial spaces where every square foot counts\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e15,000 BTU SENVILLE SENPT-15AEN R32 PTAC\u003c\/strong\u003e meets a very specific need: cooling and heating a space with a self-contained unit installed directly through an exterior wall, without a duct network and without a separate condensing unit to install on a roof, balcony, or façade.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, when we evaluate a \u003cstrong\u003ecooling and heating project in Montreal, Laval, Longueuil, on the South Shore, or on the North Shore\u003c\/strong\u003e, we do not look only at the number of BTUs listed on a specification sheet. With a PTAC, several details determine whether the installation will truly be successful: wall-opening dimensions, available electrical supply, building-envelope quality, acceptable noise level, heat discharge, the presence of a compatible sleeve, and, especially in Quebec, a heating strategy for when the outdoor temperature drops.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENVILLE SENPT-15AEN\u003c\/strong\u003e therefore deserves to be analyzed as a genuine standalone HVAC system, not simply as an “all-in-one” air conditioner.\u003c\/p\u003e\n\u003cp\u003eThe official product sheet confirms, among other things, a \u003cstrong\u003e208\/230 V single-phase, 60 Hz\u003c\/strong\u003e power supply, a \u003cstrong\u003e20 A plug with an integrated resettable circuit breaker\u003c\/strong\u003e, \u003cstrong\u003eR32\u003c\/strong\u003e refrigerant, a heat pump, a \u003cstrong\u003e3.5 kW\u003c\/strong\u003e electric heating element, a remote control, a digital LED control panel, and a smart module listed as included. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eNominally 15,000 BTU, but what does the specification sheet actually show?\u003c\/h3\u003e\n\u003cp\u003eThe SENPT-15AEN is marketed in the \u003cstrong\u003e15,000 BTU\u003c\/strong\u003e category. However, the detailed specification sheet indicates a cooling capacity of \u003cstrong\u003e14,700 \/ 14,500 BTU\/h\u003c\/strong\u003e, depending on the applicable electrical conditions.\u003c\/p\u003e\n\u003cp\u003eThis distinction is important. In the HVAC field, the rounded figure used to identify a product category does not always correspond exactly to the capacity measured under each test condition.\u003c\/p\u003e\n\u003cp\u003eFor this model, the main specifications are as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel: SENPT-15AEN\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal category: 15,000 BTU\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCooling capacity: 14,700 \/ 14,500 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh\/low indoor airflow: 416 \/ 330 CFM\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEER2: 10.6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRefrigerant: R32\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRefrigerant charge: 31.75 oz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply: 208\/230 V, single-phase, 60 Hz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCooling current: 6.5 \/ 7.4 A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCooling power consumption: 1,390 \/ 1,370 W\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat pump capacity: 13,500 \/ 13,200 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdvertised COP: 3.2\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectric heating: 13,500 \/ 13,200 BTU\/h\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectric heating element: 3.5 kW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndoor sound level: 53 \/ 52.5 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutdoor sound level: 67 dB(A)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions: 42.01 × 20.91 × 15.98 in\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight: 113.54 lb\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese values make it easier to determine whether the \u003cstrong\u003eSenville 15,000 BTU PTAC\u003c\/strong\u003e is truly suitable for a bedroom, apartment, office, or commercial space rather than choosing based solely on floor area.\u003c\/p\u003e\n\u003ch3\u003eAn airflow of 416 CFM that must be considered when arranging the room\u003c\/h3\u003e\n\u003cp\u003eWith an airflow of up to \u003cstrong\u003e416 CFM\u003c\/strong\u003e, this PTAC can move a significant amount of air for a self-contained unit.\u003c\/p\u003e\n\u003cp\u003eThis becomes particularly relevant in a relatively long room or when part of the space is far from the exterior wall. A PTAC installed behind a sofa, a large piece of furniture, thick curtains, or a counter may have its air distribution significantly disrupted.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, we emphasize this point during a \u003cstrong\u003eHVAC installation\u003c\/strong\u003e: a good unit installed in the wrong location can provide significantly less comfort than its technical specifications would suggest.\u003c\/p\u003e\n\u003cp\u003eThe location must allow for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eunobstructed indoor air intake;\u003c\/li\u003e\n\u003cli\u003eproper projection of conditioned air;\u003c\/li\u003e\n\u003cli\u003eaccess to the filter;\u003c\/li\u003e\n\u003cli\u003eaccess to the controls;\u003c\/li\u003e\n\u003cli\u003ethe clearance required for maintenance;\u003c\/li\u003e\n\u003cli\u003eair circulation that is not blocked by furniture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a project in \u003cstrong\u003eMontreal or Longueuil\u003c\/strong\u003e, for example, an existing opening in the wall may seem to automatically determine the location of the new PTAC. This is not always the case. We must first check whether this opening and its sleeve are compatible with the dimensions of the new unit and whether the previous installation was carried out correctly.\u003c\/p\u003e\n\u003ch3\u003eHeat pump and 3.5 kW electric heating element: two distinct modes\u003c\/h3\u003e\n\u003cp\u003eOne of the most interesting features of the SENPT-15AEN is its \u003cstrong\u003edual heating\u003c\/strong\u003e system.\u003c\/p\u003e\n\u003cp\u003eThe unit first offers a heat pump mode of approximately \u003cstrong\u003e13,500 \/ 13,200 BTU\/h\u003c\/strong\u003e. The datasheet lists a \u003cstrong\u003eCOP of 3.2\u003c\/strong\u003e, meaning that, under the applicable test conditions, the heat pump can provide much more heat than the amount of electrical energy directly consumed by the compressor.\u003c\/p\u003e\n\u003cp\u003eThe unit also has a \u003cstrong\u003e3.5 kW electric heating element\u003c\/strong\u003e, with a rated capacity of \u003cstrong\u003e13,500 \/ 13,200 BTU\/h\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis distinction is particularly important in Quebec.\u003c\/p\u003e\n\u003ch3\u003eThe limit to understand before installing this PTAC for heating in Quebec\u003c\/h3\u003e\n\u003cp\u003eThe SENPT-15AEN datasheet indicates an outdoor operating range of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 to 109 °F in cooling mode\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e23 to 76 °F in heating mode\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis corresponds approximately to \u003cstrong\u003e-5 °C as the stated lower limit for heating operation\u003c\/strong\u003e. The official specifications also indicate R32, an outdoor noise level of 67 dB(A), an indoor noise level of 53\/52.5 dB(A), and dimensions of 42.01 × 20.91 × 15.98 in. \u003cspan class=\"contents\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an essential detail for a customer in \u003cstrong\u003eMontreal, Laval, Longueuil, the North Shore, or the South Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe would not present this model as equivalent to a \u003cstrong\u003elow-temperature heat pump designed to maintain its capacity at -20 °C, -25 °C, or -30 °C\u003c\/strong\u003e. That is not what the SENPT-15AEN technical specifications demonstrate.\u003c\/p\u003e\n\u003cp\u003eFor a hotel room, dwelling, or commercial space heated by a PTAC, the winter heating strategy must therefore be analyzed carefully: heat-pump operation when it can function efficiently, integrated electric heating when necessary, and, depending on the building, the possible presence of another heating source.\u003c\/p\u003e\n\u003cp\u003eThis analysis avoids a common mistake: considering all appliances bearing the word “heat pump” interchangeable in the climate of \u003cstrong\u003eMontreal\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eR32: an important aspect of the SENPT-15AEN\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSenville SENPT-15AEN operates with R32 refrigerant\u003c\/strong\u003e and contains a stated charge of \u003cstrong\u003e31.75 oz\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIn the case of a PTAC, the refrigeration circuit is part of the assembled appliance. Unlike a traditional split wall-mounted heat pump, installation normally does not require a set of refrigerant lines connecting an indoor unit to a remote outdoor unit.\u003c\/p\u003e\n\u003cp\u003eThis design can simplify certain projects in buildings where individual rooms or units need to be served.\u003c\/p\u003e\n\u003cp\u003eHowever, it completely changes the installation work: wall preparation, the sleeve, sealing, and water management become particularly important.\u003c\/p\u003e\n\u003ch3\u003eNoise level: 52.5 to 53 dB(A) indoors\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer states approximately \u003cstrong\u003e52.5 to 53 dB(A)\u003c\/strong\u003e on the indoor side.\u003c\/p\u003e\n\u003cp\u003eFor a bedroom or small dwelling, this figure should be taken seriously. A PTAC houses the compressor in the same assembly as the indoor section. Its acoustic performance therefore cannot be assessed in the same way as that of a wall-mounted heat pump whose compressor is located several meters away outdoors.\u003c\/p\u003e\n\u003cp\u003eWe recommend considering the noise level based on the room's actual use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ehotel room;\u003c\/li\u003e\n\u003cli\u003ebedroom;\u003c\/li\u003e\n\u003cli\u003estudio;\u003c\/li\u003e\n\u003cli\u003eclosed office;\u003c\/li\u003e\n\u003cli\u003ecommercial area;\u003c\/li\u003e\n\u003cli\u003erental accommodation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a room used primarily at night, expectations are obviously not the same as in an office or commercial space active during the day.\u003c\/p\u003e\n\u003ch2\u003eInstalling a Senville SENPT-15AEN in Quebec: the details that make the difference\u003c\/h2\u003e\n\u003ch3\u003eThe 42-inch format facilitates certain replacements, but compatibility must be verified\u003c\/h3\u003e\n\u003cp\u003eThe SENPT-15AEN measures \u003cstrong\u003e42.01 in. wide × 20.91 in. deep × 15.98 in. high\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer indicates compatibility with a \u003cstrong\u003estandard PTAC opening\u003c\/strong\u003e, but also specifies that the \u003cstrong\u003ewall sleeve and exterior grille are sold separately for a new installation\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis detail directly affects the cost and planning of a project.\u003c\/p\u003e\n\u003cp\u003eWhen replacing a unit, we specifically check:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ethe exact dimensions of the existing sleeve;\u003c\/li\u003e\n\u003cli\u003eits structural condition;\u003c\/li\u003e\n\u003cli\u003ethe presence of corrosion;\u003c\/li\u003e\n\u003cli\u003ethe slope required for water drainage;\u003c\/li\u003e\n\u003cli\u003ethe seal around the opening;\u003c\/li\u003e\n\u003cli\u003ethe condition of the exterior grille;\u003c\/li\u003e\n\u003cli\u003ethe manufacturer’s clearances;\u003c\/li\u003e\n\u003cli\u003ethe existing electrical supply.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eA PTAC with dimensions similar to those of the old unit is not automatically a direct replacement.\u003c\/p\u003e\n\u003ch3\u003eThe wall must be part of the HVAC installation, not merely serve as an opening\u003c\/h3\u003e\n\u003cp\u003eIn older buildings in \u003cstrong\u003eMontreal\u003c\/strong\u003e, multifamily buildings in \u003cstrong\u003eLaval\u003c\/strong\u003e, commercial buildings in \u003cstrong\u003eLongueuil\u003c\/strong\u003e, or certain projects in \u003cstrong\u003eMontérégie\u003c\/strong\u003e, we may encounter very different wall compositions: masonry, concrete, metal siding, wood framing, or assemblies with multiple insulation layers.\u003c\/p\u003e\n\u003cp\u003eA poorly sealed PTAC installation can lead to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eair infiltration;\u003c\/li\u003e\n\u003cli\u003eheat loss;\u003c\/li\u003e\n\u003cli\u003econdensation;\u003c\/li\u003e\n\u003cli\u003ewater infiltration;\u003c\/li\u003e\n\u003cli\u003ediscomfort near the unit;\u003c\/li\u003e\n\u003cli\u003evibrations;\u003c\/li\u003e\n\u003cli\u003eadditional noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe therefore place as much importance on the opening and sleeve as on the PTAC itself.\u003c\/p\u003e\n\u003ch3\u003eA 208\/230 V power supply and a properly planned 20 A plug\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENVILLE SENPT-15AEN\u003c\/strong\u003e requires a \u003cstrong\u003e208\/230 V, single-phase, 60 Hz\u003c\/strong\u003e power supply and uses a \u003cstrong\u003e20 A\u003c\/strong\u003e plug with an integrated reset device.\u003c\/p\u003e\n\u003cp\u003eThis means the electrical circuit must be checked before installation.\u003c\/p\u003e\n\u003cp\u003eThe presence of an outlet nearby is not sufficient confirmation. You must ensure that the voltage, circuit, protection, and outlet configuration actually meet the model’s requirements.\u003c\/p\u003e\n\u003cp\u003eThis verification becomes even more important because the unit has a 3.5 kW electric heater. The specification sheet indicates up to \u003cstrong\u003e15,3 \/ 13,7 A\u003c\/strong\u003e for this electrical component.\u003c\/p\u003e\n\u003ch3\u003eRemote control, digital panel, and smart function\u003c\/h3\u003e\n\u003cp\u003eThe SENPT-15AEN includes a \u003cstrong\u003eremote control\u003c\/strong\u003e and a \u003cstrong\u003edigital LED control panel\u003c\/strong\u003e. The documentation consulted also mentions an \u003cstrong\u003eincluded smart kit\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIn an apartment or room occupied long term, this provides more flexibility than a simple integrated mechanical control.\u003c\/p\u003e\n\u003cp\u003eIn a hotel or rental environment, however, the question of controls must be examined according to the building's management needs. It is useful to determine from the outset who will control the temperature and how occupants will actually use the system.\u003c\/p\u003e\n\u003ch3\u003eFor which projects is the Senville 15,000 BTU PTAC particularly suitable?\u003c\/h3\u003e\n\u003cp\u003eWe consider this type of system when a project requires a standalone HVAC unit for each room and a traditional split system is not desirable.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSENPT-15AEN\u003c\/strong\u003e may be considered in particular for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ehotel and motel rooms;\u003c\/li\u003e\n\u003cli\u003estudios;\u003c\/li\u003e\n\u003cli\u003eapartments;\u003c\/li\u003e\n\u003cli\u003eresidences;\u003c\/li\u003e\n\u003cli\u003eoffices;\u003c\/li\u003e\n\u003cli\u003eadministrative spaces;\u003c\/li\u003e\n\u003cli\u003ecommercial spaces;\u003c\/li\u003e\n\u003cli\u003ereplacement of old PTACs;\u003c\/li\u003e\n\u003cli\u003ebuildings where multiple units must be controlled independently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor property managers, this architecture also makes it possible to service one unit without necessarily affecting the entire building.\u003c\/p\u003e\n\u003ch3\u003eA capacity of 15,000 BTU does not automatically mean that it is suitable for every large room\u003c\/h3\u003e\n\u003cp\u003eProper sizing remains essential.\u003c\/p\u003e\n\u003cp\u003eArea is only one parameter. We must also consider:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003esolar exposure;\u003c\/li\u003e\n\u003cli\u003ethe number of windows;\u003c\/li\u003e\n\u003cli\u003ethe quality of the insulation;\u003c\/li\u003e\n\u003cli\u003ethe number of occupants;\u003c\/li\u003e\n\u003cli\u003ecommercial or residential use;\u003c\/li\u003e\n\u003cli\u003eceiling height;\u003c\/li\u003e\n\u003cli\u003eheat-generating appliances;\u003c\/li\u003e\n\u003cli\u003eair infiltration;\u003c\/li\u003e\n\u003cli\u003ethe type of construction;\u003c\/li\u003e\n\u003cli\u003ethe room's orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn oversized PTAC can quickly reach its target temperature without providing the expected comfort and humidity control. An undersized unit may operate almost continuously.\u003c\/p\u003e\n\u003cp\u003eAt AirGreen, we prefer to verify the actual load of the space rather than recommend a \u003cstrong\u003e15,000 BTU PTAC\u003c\/strong\u003e simply because it appears to match a theoretical area.\u003c\/p\u003e\n\u003ch3\u003eSenville warranty and additional warranty\u003c\/h3\u003e\n\u003cp\u003eOn AirGreen's page for this model, the \u003cstrong\u003emanufacturer's warranty is listed as 10-10-0\u003c\/strong\u003e, with the possibility of an \u003cstrong\u003eadditional warranty\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe exact conditions must always be confirmed according to the installation, product registration, and terms applicable at the time of purchase.\u003c\/p\u003e\n\u003cp\u003eWe also recommend keeping:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe invoice;\u003c\/li\u003e\n\u003cli\u003ethe model number;\u003c\/li\u003e\n\u003cli\u003ethe serial number;\u003c\/li\u003e\n\u003cli\u003einstallation information;\u003c\/li\u003e\n\u003cli\u003ewarranty documents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis documentation considerably simplifies any subsequent follow-up.\u003c\/p\u003e\n\u003ch3\u003eMaintenance: an accessible PTAC does not mean a maintenance-free PTAC\u003c\/h3\u003e\n\u003cp\u003eThe fact that a PTAC is compact and self-contained does not eliminate the need for maintenance.\u003c\/p\u003e\n\u003cp\u003eThe filter must remain clean to maintain adequate airflow. The coils must also be able to exchange heat properly. A unit with a rated airflow of \u003cstrong\u003e416 CFM\u003c\/strong\u003e cannot operate optimally if the filter or heat exchanger is heavily obstructed.\u003c\/p\u003e\n\u003cp\u003eWe also pay attention to the following signs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ereduced airflow;\u003c\/li\u003e\n\u003cli\u003eincreased noise;\u003c\/li\u003e\n\u003cli\u003efrequent starts;\u003c\/li\u003e\n\u003cli\u003einsufficient cooling;\u003c\/li\u003e\n\u003cli\u003ewater around the unit;\u003c\/li\u003e\n\u003cli\u003eodors;\u003c\/li\u003e\n\u003cli\u003esignificant dust buildup;\u003c\/li\u003e\n\u003cli\u003eelectric heating that seems to be operating abnormally often.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePreventive maintenance is especially relevant in hotels, rental properties, and commercial buildings where PTACs may operate for several hours a day.\u003c\/p\u003e\n\u003ch3\u003eWhy have your Senville PTAC installed by AirGreen?\u003c\/h3\u003e\n\u003cp\u003eAt AirGreen, our approach is to look at the \u003cstrong\u003eentire system\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe serve \u003cstrong\u003eMontreal, Laval, Longueuil, the North Shore, the South Shore, and Montérégie\u003c\/strong\u003e for air conditioning, heating, and \u003cstrong\u003eHVAC installation\u003c\/strong\u003e projects.\u003c\/p\u003e\n\u003cp\u003eFor the \u003cstrong\u003eSenville SENPT-15AEN\u003c\/strong\u003e, we can check the following before installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ewhether the 15,000 BTU capacity is actually suitable for the space;\u003c\/li\u003e\n\u003cli\u003ewhether the wall opening is suitable;\u003c\/li\u003e\n\u003cli\u003ewhether a sleeve or grille needs to be added or replaced;\u003c\/li\u003e\n\u003cli\u003ewhether the 208\/230 V power supply is compatible;\u003c\/li\u003e\n\u003cli\u003ewhether the positioning ensures proper distribution of the 416 CFM;\u003c\/li\u003e\n\u003cli\u003ewhether the heating strategy is suitable for Quebec's winter temperatures;\u003c\/li\u003e\n\u003cli\u003ewhether future access to the filter and unit remains convenient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is particularly important for this model, as its documentation indicates a heating operating limit that must be understood before using it as the primary source of heating for a space during a Montreal winter.\u003c\/p\u003e\n\u003ch3\u003eGet a quote for the SENVILLE SENPT-15AEN PTAC\u003c\/h3\u003e\n\u003cp\u003eAre you considering the \u003cstrong\u003eSENVILLE R32 15,000 BTU SENPT-15AEN PTAC\u003c\/strong\u003e for an apartment, bedroom, hotel, office, or commercial building?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact AirGreen for an estimate and technical assessment of your project.\u003c\/strong\u003e We can check the unit, wall opening, electrical supply, actual BTU requirements, and installation conditions before proposing a solution suited to your building in \u003cstrong\u003eMontreal, Laval, Longueuil, the North Shore, or the South Shore\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Senville","offers":[{"title":"Default Title","offer_id":56120271831332,"sku":"SENPT-15AEN","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/00_PTAC_SENVILLE_R32_15000_BTU_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD_RIVE_NORD.png?v=1789067676","url":"https:\/\/airgreen.ca\/en\/products\/ptac-senville-r32-15000-btu-montreal-laval-rive-sud","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}