{"product_id":"thermopompe-centrale-add-on-arcoaire-h4h7t-ion-2-stages-5-tonnes-60000-btu-serpentin-evd4x-24-5-po-r410a","title":"Central Heat Pump ADD-ON ARCOAIRE H4H7T ION 2 stages | 5 Tons - 60,000 BTU (Coil EVD4X 24.5 in.) - R410A","description":"\u003ch2\u003eTwo compressor stages and an electric furnace to share the winter of a large house\u003c\/h2\u003e\u003cp\u003eThe ADD-ON system adds a heat pump to an existing electric furnace: a coil is installed on the furnace and the outdoor unit heats and cools through the same ducts. The furnace's electric elements are only used as backup. The \u003cstrong\u003eCentral Heat Pump ADD-ON ARCOAIRE H4H7T ION 2 stages | 5 Tons - 60,000 BTU (Coil EVD4X 24.5 in.) - R410A\u003c\/strong\u003e pairs the \u003cstrong\u003eH4H7T60AKAAA\u003c\/strong\u003e outdoor unit with the \u003cstrong\u003eEVD4X60M24A\u003c\/strong\u003e coil.\u003c\/p\u003e\u003cp\u003eIts ratings are \u003cstrong\u003e14.3 SEER2\u003c\/strong\u003e, \u003cstrong\u003e10.5 EER2\u003c\/strong\u003e and \u003cstrong\u003e7.5 HSPF2\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIn a large house, winter is not handled by a single heat source. This pairing combines a \u003cstrong\u003etwo-stage compressor\u003c\/strong\u003e with the \u003cstrong\u003eelectric furnace\u003c\/strong\u003e already in place, with capacities published in the AHRI certification directory. This page shows how these three levels of response share the season, and what the certificate's figures let us set up in your home.\u003c\/p\u003e\u003ch3\u003eThe 5-ton size: which home it suits\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003e5-ton\u003c\/strong\u003e size is the largest common residential size. It suits a very large house on two or three levels, a heavily glazed house facing south or west, or an extended house whose \u003cstrong\u003educt\u003c\/strong\u003e system serves many rooms, in \u003cstrong\u003eLaval\u003c\/strong\u003e as on the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e. These examples are only a guide: insulation, sun exposure and airtightness change the actual load considerably.\u003c\/p\u003e\u003cp\u003eIn an ADD-ON, we size the heat pump on the cooling load, established by a room-by-room \u003cstrong\u003eon-site assessment\u003c\/strong\u003e, since the furnace's electric elements cover the deep cold. If the assessment ends up at a smaller size, we tell you: an oversized unit cools in short cycles and dries the air poorly.\u003c\/p\u003e\u003ch3\u003eWhat the certificate shows\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAt -8 °C\u003c\/strong\u003e (17 °F): \u003cstrong\u003e36,200 BTU\/h\u003c\/strong\u003e.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAt -15 °C\u003c\/strong\u003e (5 °F): \u003cstrong\u003e28,800 BTU\/h\u003c\/strong\u003e, with a \u003cstrong\u003eCOP of 1.98\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe two points are measured separately; we report each one as published. These figures come from certificate \u003cstrong\u003eAHRI 213677793\u003c\/strong\u003e, as published in the AHRI certification directory.\u003c\/p\u003e\u003cp\u003eThe manufacturer designs the EVD4X coil for air conditioning (\"AC applications only\"). For a heat pump, AirGreen confirms at the visit a coil approved for heating and the pairing’s AHRI rating, before the quote.\u003c\/p\u003e\u003ch3\u003eWhy capacity drops as the cold deepens\u003c\/h3\u003e\u003cp\u003eA heat pump captures the heat contained in the outdoor air. The colder that air, the less heat there is to capture, and the harder the compressor must work to bring it up to the house. For this system of \u003cstrong\u003e60,000 BTU\u003c\/strong\u003e nominal, the published capacity represents about 60% of the size at -8 °C and about 48% at -15 °C.\u003c\/p\u003e\u003cp\u003eMeanwhile, the house loses more and more heat as the outdoor temperature falls. The two curves cross at a temperature specific to each house, the \u003cstrong\u003ebalance point\u003c\/strong\u003e. We estimate it from your on-site assessment and the certified capacities, then set the thermostat accordingly.\u003c\/p\u003e\u003ch3\u003eA winter in three modes\u003c\/h3\u003e\u003cp\u003eIn mild weather, the compressor runs on its reduced stage: cycles are long and the temperature stays even from one room to the next. When the cold sets in, it moves to its full stage. Below the balance point, the \u003cstrong\u003ethermostat\u003c\/strong\u003e brings in the electric elements of the \u003cstrong\u003efurnace\u003c\/strong\u003e as \u003cstrong\u003eauxiliary heat\u003c\/strong\u003e, alongside the heat pump; on the coldest days, they carry most of the heating.\u003c\/p\u003e\u003cp\u003eThe auxiliary heat threshold takes into account the house and your preferences; we set it at commissioning and show you how to change it. The heat pump's air is less hot than the air from the electric elements, and its cycles are longer: this is normal. During defrost, a plume of vapour comes out of the outdoor unit, and the furnace's elements may come on briefly so that the air at the registers stays warm.\u003c\/p\u003e\u003ch3\u003eThe seasonal ratings, plainly\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSEER2\u003c\/strong\u003e at 14.3 measures cooling efficiency over a typical summer, and \u003cstrong\u003eEER2\u003c\/strong\u003e at 10.5 the efficiency at full load on a hot day. \u003cstrong\u003eHSPF2\u003c\/strong\u003e at 7.5 measures heating efficiency over a full season.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eCOP\u003c\/strong\u003e gives the efficiency at a specific temperature. An electric baseboard has a COP of 1: it delivers the energy it consumes, no more. At -15 °C, this system shows a COP of 1.98: at that test point, it delivers nearly twice the heat it consumes in electricity. These ratings are established under standardized test conditions; in your home, airflow and maintenance affect what the system actually delivers.\u003c\/p\u003e\u003ch3\u003eThe time-delay relay (TDR)\u003c\/h3\u003e\u003cp\u003eThese ratings are certified with the manufacturer's \u003cstrong\u003etime-delay relay (TDR)\u003c\/strong\u003e; we install it with the coil. This relay briefly keeps the blower running after the compressor stops, to make use of the cooling left in the coil. Without it, the installation would not quite match the certified configuration.\u003c\/p\u003e\u003ch3\u003eThe furnace blower and the 24.5 in. coil\u003c\/h3\u003e\u003cp\u003eIn an ADD-ON, the \u003cstrong\u003efurnace blower\u003c\/strong\u003e moves the air through the coil. At this size, it must deliver a large airflow; the furnace documentation states the maximum cooling capacity its blower can serve, and we check it on your model. A blower that is too weak would leave the coil starved of air and deliver less capacity than the certificate shows.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eEVD4X60M24A\u003c\/strong\u003e coil is a \u003cstrong\u003e24.5 in.\u003c\/strong\u003e format, designed for the wide cabinets of high-capacity furnaces. It must match the width of the cabinet, with a sealed sheet-metal transition when needed, and it fits between the air outlet and the plenum.\u003c\/p\u003e\u003ch3\u003eSummer in a large house\u003c\/h3\u003e\u003cp\u003eIn summer, the coil cools the air and removes humidity, which drains through the condensate line to the floor drain or a pump. The compressor's reduced stage suits hot, humid days well: it runs for a long time at low capacity, which gives the coil time to dry the air. During heat waves in \u003cstrong\u003eMontreal\u003c\/strong\u003e, the full stage takes over. In a house on several levels, balancing the dampers helps the upper floor get its share of cool air.\u003c\/p\u003e\u003ch3\u003eLogisVert\u003c\/h3\u003e\u003cp\u003eThis pairing does not carry an amount on Hydro-Québec's LogisVert list of October 19, 2026. If the grant matters for your project, we will point you to an eligible pairing of comparable size.\u003c\/p\u003e\u003ch2\u003eInstallation on the existing furnace\u003c\/h2\u003e\u003cp\u003eThe coil sits on the furnace's air outlet, and a compatible thermostat decides when the heat pump heats alone and when the electric furnace takes over. We check the condition of the furnace, the airflow of its blower and the duct sizes before the quote. The outdoor unit goes on a stand, above the snow line, on a \u003cstrong\u003ededicated circuit\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eThe outdoor unit, the line set and the electrical work\u003c\/h3\u003e\u003cp\u003eAt this size, the outdoor unit is bulky. It sits on a sturdy stand, out of roof drip and away from bedroom windows, according to your municipality's rules. The insulated \u003cstrong\u003erefrigerant line set\u003c\/strong\u003e, with a diameter suited to this pairing, is brazed under nitrogen, pressure-tested and evacuated, then the \u003cstrong\u003eR-410A\u003c\/strong\u003e charge is adjusted at commissioning. Before the quote, we check the capacity of the electrical panel, which already feeds the electric furnace; the connection includes a dedicated circuit, an outdoor disconnect and control wiring to the furnace and thermostat.\u003c\/p\u003e\u003cp\u003eCommissioning ends with a test of each mode: cooling, heat pump heating on both stages, auxiliary heat from the furnace's elements and defrost.\u003c\/p\u003e\u003ch3\u003eMaintenance\u003c\/h3\u003e\u003cp\u003eReplace the system filter according to its format, keep the outdoor unit clear of snow and leaves, and plan annual \u003cstrong\u003eHVAC maintenance\u003c\/strong\u003e of the coil, condensate drain and electrical connections. In winter, white vapour during defrost is normal.\u003c\/p\u003e\u003cp\u003eAt this size, a large volume of air passes through the filter and the coil: a clogged filter quickly costs part of the certified capacity. Check it every month for the first few seasons. The electric furnace keeps its usual maintenance, centred on the blower, the heating elements and their connections.\u003c\/p\u003e\u003ch3\u003eAirGreen, for the life of the installation\u003c\/h3\u003e\u003cp\u003eA family business active for more than fifteen years in \u003cstrong\u003eMontreal\u003c\/strong\u003e, \u003cstrong\u003eLaval\u003c\/strong\u003e, \u003cstrong\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong\u003eSouth Shore\u003c\/strong\u003e, we hold RBQ licences for ventilation, refrigeration and electrical work and carry \u003cstrong\u003e$5,000,000\u003c\/strong\u003e in liability insurance. The in-home assessment is free, the quote is in writing, and our \u003ca href=\"\/en\/pages\/financement-avec-financeit\"\u003efinancing options\u003c\/a\u003e let you choose the right unit rather than the cheapest one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRequest your free estimate for the Central Heat Pump ADD-ON ARCOAIRE H4H7T ION 2 stages | 5 Tons - 60,000 BTU (Coil EVD4X 24.5 in.) - R410A. We assess the home room by room and confirm the right size and your grant eligibility before signing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable while supplies last.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10 years on the compressor, 10 years on parts and 6 years on labor.\u003c\/p\u003e","brand":"Arcoaire","offers":[{"title":"Default Title","offer_id":67799337763108,"sku":"H4H7T60AKAAA","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_CENTRALE_ADD_ON_ARCOAIRE_H4H7T_5_TONNES_60000_BTU_R410A_00_MONTREAL_LAVAL_LONGUEUIL_RIVE_SUD.png?v=1793082528","url":"https:\/\/airgreen.ca\/en\/products\/thermopompe-centrale-add-on-arcoaire-h4h7t-ion-2-stages-5-tonnes-60000-btu-serpentin-evd4x-24-5-po-r410a","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}