{"product_id":"thermopompe-monobloc-york-xp-de-12-5-tonnes-triphase-montreal-laval-longueuil-rive-sud-et-rive-nord","title":"Packaged Heat Pump System York XP 12.5 Ton Three-Phase | Montreal, Laval, Longueuil, South Shore and North Shore","description":"\u003ch2\u003eAt the top of the Sun Pro range: 12.5 tons for the largest commercial floor areas\u003c\/h2\u003e\n\u003cp\u003eA supermarket with doors opening non-stop, a reception hall that goes from empty to full in one evening, a gym where classes follow one after the other, a big-box store with endless aisles: these buildings call for a lot of capacity and a lot of air. The YORK Sun Pro XP150 \u003cstrong\u003epackaged heat pump\u003c\/strong\u003e, fed by \u003cstrong\u003e208\/230 V three-phase\u003c\/strong\u003e, is the largest model in a series that runs from 6.5 to 12.5 tons, with a longer cabinet, four condenser fans and a rated airflow of 4,600 CFM. AirGreen takes care of the sizing, the installation and the maintenance in Montreal, Laval and Longueuil, as well as on the North Shore and the South Shore.\u003c\/p\u003e\n\n\u003ch3\u003eA single cabinet on the roof, a clear sales floor\u003c\/h3\u003e\n\u003cp\u003eA packaged heat pump houses the controls, the compressors, the coils and the fans in a single outdoor cabinet. The unit sits on a roof curb, a pad or a frame, then connects to the duct system, on the supply side and the return side; it cools in summer and heats the rest of the year. No mechanical room to plan for, nothing in the sales floor or in the drop ceiling, and maintenance carried out on the roof, without closing an aisle or moving a banquet. Every XP150 leaves the factory wired, tested and charged with \u003cstrong\u003eR-410A\u003c\/strong\u003e, the proven refrigerant of the previous generation.\u003c\/p\u003e\n\n\u003ch3\u003eKey characteristics of the XP150C00R2B1BAA1A3\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRated capacity: 12.5 tons (150,000 BTU\/h)\u003c\/li\u003e\n\u003cli\u003eAHRI net cooling: 141,000 BTU\/h\u003c\/li\u003e\n\u003cli\u003eHeating at 47 °F (8.3 °C): 138,000 BTU\/h, COP of 3.3\u003c\/li\u003e\n\u003cli\u003eHeating at 17 °F (-8.3 °C): 82,000 BTU\/h, COP of 2.15\u003c\/li\u003e\n\u003cli\u003eEfficiency: 10.6 EER, 14.5 IEER with IntelliSpeed\u003c\/li\u003e\n\u003cli\u003ePower supply: 208\/230 V, three-phase, 60 Hz (187 to 252 V applied)\u003c\/li\u003e\n\u003cli\u003eCompressors: 2 scroll on independent circuits (stages of 50% and 100%)\u003c\/li\u003e\n\u003cli\u003eRated airflow: 4,600 CFM (ft³\/min), 5 HP motor\u003c\/li\u003e\n\u003cli\u003eCondenser: 4 fans of 24 in., 14,000 CFM in total\u003c\/li\u003e\n\u003cli\u003eDimensions (length x width x height): 119-7\/16 x 59 x 50-3\/4 in.\u003c\/li\u003e\n\u003cli\u003eOperating weight: 1,403 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEER, IEER and two stages: reading the efficiency of a 12.5 ton unit\u003c\/h3\u003e\n\u003cp\u003eYou will find neither SEER nor HSPF on the data sheet of this model: from 6 tons up, a unit is compared in EER and in IEER. The \u003cstrong\u003e10.6 EER\u003c\/strong\u003e measures full-load performance; the \u003cstrong\u003e14.5 IEER\u003c\/strong\u003e, obtained with the IntelliSpeed drive, weighs performance at part load. That is where the two scroll compressors come in, delivering 50% and then 100% of the capacity: in a supermarket, the first one can be enough on a Tuesday morning, and the second starts on Saturday afternoon, when the lines at the checkouts get longer. The drive then sets the blower speed according to the number of active compressors.\u003c\/p\u003e\n\n\u003ch3\u003eA longer cabinet, four fans and a 5 HP motor\u003c\/h3\u003e\n\u003cp\u003eWhere the 6.5 to 10 ton models measure 89 in., the XP150 stretches to 119-7\/16 in. That length holds a condenser coil of 47.5 ft² (29.0 ft² on the other sizes) and \u003cstrong\u003efour 24 in. fans\u003c\/strong\u003e with direct drive instead of two, moving 14,000 CFM. Inside the cabinet, a 5 HP motor (184T frame), fitted with an adjustable-pitch sheave, belt-drives a 15 x 15 in. double-inlet centrifugal wheel; motor and wheel form a slide-out assembly. The tables in the guide cover external static pressures from 0.2 to 2.0 in. of water column, useful for long duct systems.\u003c\/p\u003e\n\n\u003ch3\u003eDecoding the model number\u003c\/h3\u003e\n\u003cp\u003eAccording to the YORK nomenclature, this number designates a 208\/230 V three-phase unit whose high static pressure drive is controlled by the \u003cstrong\u003eIntelliSpeed drive\u003c\/strong\u003e, with an \u003cstrong\u003eeconomizer with barometric relief damper\u003c\/strong\u003e, a phase monitor, a Smart Equipment control in stand-alone mode, 2 in. disposable filters, standard coils and cabinet. Fitted with low-leakage AMCA 511 Class 1A dampers, the economizer admits up to 100% outdoor air and takes over from the compressors as soon as the outdoor air allows it. The unit is delivered with no service option (disconnect, convenience outlet) and with no electric heat.\u003c\/p\u003e\n\n\u003ch3\u003eElectric heat kits and ampacity: sizing the three-phase service\u003c\/h3\u003e\n\u003cp\u003eIn heat pump mode, the XP150 delivers 138,000 BTU\/h at 47 °F and 82,000 BTU\/h at 17 °F. When the cold gets sharper, YORK offers for this size \u003cstrong\u003eelectric heat\u003c\/strong\u003e kits in four sizes, namely 18, 24, 36 and 54 kW, two-stage and with single-point power. Without electric heat, the YORK tables drawn up for the high static pressure motor, in the version without a powered convenience outlet, give an \u003cstrong\u003eMCA (minimum circuit ampacity) of 78.4 A\u003c\/strong\u003e and a protection of 100 A at most. With the 54 kW kit, the MCA reaches 166.9 A at 208 V and 180.7 A at 230 V. The voltage counts too: this kit delivers 54 kW at 230 V, but 40.6 kW at 208 V.\u003c\/p\u003e\n\n\u003ch3\u003eSmart Equipment and phase monitor: a hard-working unit, closely watched\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSmart Equipment\u003c\/strong\u003e board receives its temperature sensors at the factory (supply air, return air, outdoor air). Its LCD screen displays the fault codes, whose history the USB port keeps. The board also protects the unit during a voltage drop, while the \u003cstrong\u003ephase monitor\u003c\/strong\u003e shuts it down if it detects a missing phase or a reversed rotation, two risks specific to three-phase power. Three safety trips in less than two hours lock out only the associated compressor. Finally, the built-in low-ambient control allows cooling down to 0 °F (-17.8 °C) outdoors, in a comfort application and with no additional component: useful when a hall full of guests warms the air well before spring.\u003c\/p\u003e\n\n\u003ch3\u003eCrane, roof curb and connections: preparing the job site\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e 1,403 lb in operation for the base unit, plus 85 lb for the economizer according to the accessories table. The guide also gives the load per support point and the centre of gravity, useful to the structural engineer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting:\u003c\/strong\u003e the rails that run around the base are drilled with lifting holes for the crane slings and accept the forks of a forklift on three sides; the lift is preferably planned outside business hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof curb:\u003c\/strong\u003e YORK offers curbs with insulated deck, 8 or 14 in. high and shipped knocked down, as well as a 10 in. transition adapter intended for Sunline curbs from 7.5 to 12.5 tons only. Since the XP150 cabinet is longer, we confirm the exact curb with the distributor before ordering; it has to rise at least 8 in. above the finished roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearances:\u003c\/strong\u003e 72 in. clear above the four fans, 12 in. on the right side, 36 in. for the front, the back and the left side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e a single electrical entry, on the side or from below, and a disconnect to plan for in the field; the ducts connect underneath or on the side, with no panel cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrom the visit to the start-up: AirGreen takes charge of your 12.5 ton unit\u003c\/h2\u003e\n\u003cp\u003eOur \u003cstrong\u003efree on-site estimate\u003c\/strong\u003e covers the floor area and the height of the space, the occupancy peaks, the ducts, the three-phase service, the roof structure and the crane access; it makes it possible to confirm the size. We then organize the crane, install the unit and commission it: balancing the 4,600 CFM, setting the IntelliSpeed drive, the economizer and the Smart Equipment control. \u003cstrong\u003ePlanned maintenance\u003c\/strong\u003e then takes over: four 24 x 20 x 2 in. filters, belt, coils cleaned through the service windows, slide-out condensate pan and fault history.\u003c\/p\u003e\n\u003cp\u003eOur territory covers Montreal, Laval, Longueuil, the North Shore and the South Shore, with short response times and careful work. To book your visit, call 514 316-2973 or send your request through the form on airgreen.ca; a detailed quote follows quickly.\u003c\/p\u003e","brand":"York","offers":[{"title":"Default Title","offer_id":56367635398948,"sku":"XP150C00R2B1BAA1A3","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/THERMOPOMPE_MONOBLOC_YORK_SUN_PRO_00_PRINCIPALE_9af310f9-ad90-4802-94be-0fb76bba0f71.png?v=1790086978","url":"https:\/\/airgreen.ca\/en\/products\/thermopompe-monobloc-york-xp-de-12-5-tonnes-triphase-montreal-laval-longueuil-rive-sud-et-rive-nord","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}