{"product_id":"thermopompe-murale-kinghome-charmo-r32-12000-btu-220v","title":"KINGHOME Charmo R32 Wall-Mounted Heat Pump | 12000 BTU 220V","description":"\u003ch2 data-section-id=\"101h79f\" data-start=\"76\" data-end=\"157\"\u003eA compact, efficient wall-mounted heat pump well-suited for Quebec winters\u003c\/h2\u003e\n\u003cp data-start=\"159\" data-end=\"849\"\u003eThe \u003cstrong data-start=\"162\" data-end=\"221\"\u003eKINGHOME Charmo R32 Wall-Mounted Heat Pump | 12000 BTU 220V\u003c\/strong\u003e addresses a very concrete need that we at AirGreen see every week: obtaining a reliable wall-mounted system for heating and cooling a main room, a condo, a home office, a rental unit, or a medium-sized living area, without falling into an unnecessarily complex installation. In \u003cstrong data-start=\"534\" data-end=\"546\"\u003eMontreal\u003c\/strong\u003e, \u003cstrong data-start=\"548\" data-end=\"557\"\u003eLaval\u003c\/strong\u003e, \u003cstrong data-start=\"559\" data-end=\"572\"\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong data-start=\"581\" data-end=\"594\"\u003eNorth Shore\u003c\/strong\u003e, and on the \u003cstrong data-start=\"605\" data-end=\"617\"\u003eSouth Shore\u003c\/strong\u003e, many homeowners are looking for a high-performance solution, eligible for subsidies, with a good level of comfort in both winter and summer. This \u003cstrong data-start=\"793\" data-end=\"807\"\u003e12,000 BTU\u003c\/strong\u003e KINGHOME Charmo R32 model fits precisely into this logic.\u003c\/p\u003e\n\u003cp data-start=\"851\" data-end=\"1502\"\u003eThis is not a randomly chosen machine. It combines a nominal capacity of \u003cstrong data-start=\"933\" data-end=\"947\"\u003e12,000 BTU\u003c\/strong\u003e, a \u003cstrong data-start=\"966\" data-end=\"974\"\u003e220V\u003c\/strong\u003e power supply, \u003cstrong data-start=\"991\" data-end=\"999\"\u003eR-32\u003c\/strong\u003e refrigerant, \u003cstrong data-start=\"1019\" data-end=\"1048\"\u003eENERGY STAR® Cold Climate\u003c\/strong\u003e certification, \u003cstrong data-start=\"1053\" data-end=\"1068\"\u003eWiFi included\u003c\/strong\u003e, as well as heating capacity down to \u003cstrong data-start=\"1113\" data-end=\"1123\"\u003e-25 °C\u003c\/strong\u003e. According to the manufacturer's technical sheet, the system uses models \u003cstrong data-start=\"1195\" data-end=\"1210\"\u003eKW12HQ19CDI\u003c\/strong\u003e for the indoor unit and \u003cstrong data-start=\"1238\" data-end=\"1253\"\u003eKW12HQ19CDO\u003c\/strong\u003e for the outdoor unit, with AHRI number \u003cstrong data-start=\"1294\" data-end=\"1312\"\u003e217956851\u003c\/strong\u003e and ENERGY STAR ID \u003cstrong data-start=\"1342\" data-end=\"1353\"\u003e4514328\u003c\/strong\u003e. The brochure also indicates a SEER2 efficiency of 19, an HSPF2 of 8.5, an EER of 2.85 W\/W, and a COP of 3.5 W\/W.\u003c\/p\u003e\n\u003cp data-start=\"1504\" data-end=\"2018\"\u003eIn a Quebec residential context, these technical details are genuinely important. A \u003cstrong data-start=\"1597\" data-end=\"1619\"\u003ewall-mounted heat pump\u003c\/strong\u003e shouldn't just cool well in July. It must also start correctly during intense cold, manage defrosting, maintain a stable airflow, and be installed in a way that avoids classic problems: poorly oriented drainage, outdoor unit too low in the snow, poorly protected refrigerant lines, noise transmitted to the structure, or poorly chosen indoor location.\u003c\/p\u003e\n\u003cp data-start=\"2020\" data-end=\"2273\"\u003eAt AirGreen, we often see clients come in with a simple idea: \"I want a 12,000 BTU heat pump.\" Our role is to transform this request into a truly durable, well-sized, and well-positioned \u003cstrong data-start=\"2193\" data-end=\"2214\"\u003eHVAC installation\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1mez17o\" data-start=\"2275\" data-end=\"2363\"\u003eWhy the KINGHOME Charmo R32 12,000 BTU is suitable for several residential projects\u003c\/h3\u003e\n\u003cp data-start=\"2365\" data-end=\"2418\"\u003eThe \u003cstrong data-start=\"2375\" data-end=\"2389\"\u003e12,000 BTU\u003c\/strong\u003e size is often appropriate for:\u003c\/p\u003e\n\u003cul data-start=\"2420\" data-end=\"2746\"\u003e\n\u003cli data-section-id=\"18q7g4a\" data-start=\"2420\" data-end=\"2461\"\u003ea medium-sized open room;\u003c\/li\u003e\n\u003cli data-section-id=\"ljwty9\" data-start=\"2462\" data-end=\"2502\"\u003ea well-insulated condo or apartment;\u003c\/li\u003e\n\u003cli data-section-id=\"113v0yn\" data-start=\"2503\" data-end=\"2537\"\u003ea living room with an adjacent kitchen;\u003c\/li\u003e\n\u003cli data-section-id=\"15mfio0\" data-start=\"2538\" data-end=\"2583\"\u003ea home office used year-round;\u003c\/li\u003e\n\u003cli data-section-id=\"1w21cng\" data-start=\"2584\" data-end=\"2655\"\u003ea rental unit where the owner wants to improve comfort;\u003c\/li\u003e\n\u003cli data-section-id=\"1kbw5cb\" data-start=\"2656\" data-end=\"2746\"\u003ean extension, a basement, or a room difficult to cool with the existing system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2748\" data-end=\"3210\"\u003eIn \u003cstrong data-start=\"2750\" data-end=\"2762\"\u003eMontreal\u003c\/strong\u003e, we regularly install this type of system in plexes where outdoor space is limited. In these cases, compact dimensions become an asset. The sheet indicates an indoor unit of approximately \u003cstrong data-start=\"2969\" data-end=\"2996\"\u003e32.88 x 7.88 x 10.83 inches\u003c\/strong\u003e and an outdoor unit of approximately \u003cstrong data-start=\"3031\" data-end=\"3059\"\u003e28.81 x 12.98 x 21.88 inches\u003c\/strong\u003e, which facilitates integration in courtyards, technical balconies, or side facades when local regulations and clearances allow.\u003c\/p\u003e\n\u003cp data-start=\"3212\" data-end=\"3709\"\u003eOn the \u003cstrong data-start=\"3219\" data-end=\"3231\"\u003eSouth Shore\u003c\/strong\u003e, we often encounter single-family homes where the client wants to add a wall-mounted heat pump to a specific area, without modifying the entire central system. In a home in Boucherville, for example, a 12,000 BTU installation in an open living area can sometimes resolve summer discomfort in the main room while providing supplementary heating in the mid-season. The choice of wall location then becomes as important as the choice of machine.\u003c\/p\u003e\n\u003cp data-start=\"3711\" data-end=\"4232\"\u003eIn \u003cstrong data-start=\"3713\" data-end=\"3722\"\u003eLaval\u003c\/strong\u003e and on the \u003cstrong data-start=\"3733\" data-end=\"3746\"\u003eNorth Shore\u003c\/strong\u003e, several clients are looking for a solution for a floor or a room facing direct sunlight. A wall-mounted system with automatic vertical and horizontal louvers, like this one, allows for better air distribution and prevents a direct jet from constantly hitting occupants. The technical sheet mentions automatic control of vertical and horizontal airflow, a useful detail for improving real comfort, not just the temperature displayed on the thermostat.\u003c\/p\u003e\n\u003ch3 data-section-id=\"ytw8o1\" data-start=\"4234\" data-end=\"4314\"\u003eR-32, Cold Climate and heating to -25 °C: what this concretely means\u003c\/h3\u003e\n\u003cp data-start=\"4316\" data-end=\"4829\"\u003e\u003cstrong data-start=\"4319\" data-end=\"4327\"\u003eR-32\u003c\/strong\u003e is a new generation refrigerant increasingly present in modern wall-mounted systems. For the customer, the goal remains simple: obtain an efficient, recent heat pump that complies with current market trends and is suitable for prolonged use. For the installer, R-32 also requires a good understanding of HVAC practices: proper handling, rigorous vacuuming, checking connections, controlling piping lengths, and respecting refrigerant charges.\u003c\/p\u003e\n\u003cp data-start=\"4831\" data-end=\"5210\"\u003eThe heating capacity down to \u003cstrong data-start=\"4864\" data-end=\"4874\"\u003e-25 °C\u003c\/strong\u003e is particularly relevant for Greater Montreal. This does not mean that the heat pump will automatically replace all heating systems in all buildings. Rather, it means that it can provide useful heating at very low temperatures, within the limits of its capacity and the installation context.\u003c\/p\u003e\n\u003cp data-start=\"5212\" data-end=\"5250\"\u003eThe technical data sheet notably indicates:\u003c\/p\u003e\n\u003cul data-start=\"5252\" data-end=\"5663\"\u003e\n\u003cli data-section-id=\"5upaim\" data-start=\"5252\" data-end=\"5320\"\u003e\n\u003cstrong data-start=\"5254\" data-end=\"5268\"\u003e12,000 BTU\u003c\/strong\u003e nominal heating capacity at 47 °F \/ 8.3 °C;\u003c\/li\u003e\n\u003cli data-section-id=\"1v9l4pp\" data-start=\"5321\" data-end=\"5363\"\u003eapproximately \u003cstrong data-start=\"5331\" data-end=\"5344\"\u003e9,700 BTU\u003c\/strong\u003e at 17 °F \/ -8.3 °C;\u003c\/li\u003e\n\u003cli data-section-id=\"3tfsrt\" data-start=\"5364\" data-end=\"5404\"\u003eapproximately \u003cstrong data-start=\"5374\" data-end=\"5387\"\u003e9,100 BTU\u003c\/strong\u003e at 5 °F \/ -15 °C;\u003c\/li\u003e\n\u003cli data-section-id=\"9wqrew\" data-start=\"5405\" data-end=\"5458\"\u003ean announced heating range down to \u003cstrong data-start=\"5447\" data-end=\"5457\"\u003e-25 °C\u003c\/strong\u003e;\u003c\/li\u003e\n\u003cli data-section-id=\"1078w53\" data-start=\"5459\" data-end=\"5570\"\u003e8 °C heating included, useful for certain spaces where an excessive temperature drop is to be avoided;\u003c\/li\u003e\n\u003cli data-section-id=\"fplszh\" data-start=\"5571\" data-end=\"5663\"\u003eforced defrosting and an outdoor base heater, useful for winter cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"5665\" data-end=\"6138\"\u003eIn an installation in \u003cstrong data-start=\"5689\" data-end=\"5702\"\u003eLongueuil\u003c\/strong\u003e, for example, this type of performance can be interesting for an owner who wants to reduce the use of electric baseboards in a main room, while retaining a complementary heat source for the most demanding days. The right approach always involves analyzing insulation, surface area, ceiling height, sun exposure, air circulation, and usage habits.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1oq4luo\" data-start=\"6140\" data-end=\"6178\"\u003eSound level and daily comfort\u003c\/h3\u003e\n\u003cp data-start=\"6180\" data-end=\"6343\"\u003eA wall-mounted heat pump is not only evaluated by its BTUs. Noise matters a lot, especially in a living room, bedroom, office, or rental unit.\u003c\/p\u003e\n\u003cp data-start=\"6345\" data-end=\"6845\"\u003eAccording to the provided data, the indoor unit operates between \u003cstrong data-start=\"6409\" data-end=\"6427\"\u003e27 and 47 dB(A)\u003c\/strong\u003e depending on the speed, with a Sleep mode at \u003cstrong data-start=\"6467\" data-end=\"6479\"\u003e27 dB(A)\u003c\/strong\u003e. The outdoor unit is rated at \u003cstrong data-start=\"6515\" data-end=\"6527\"\u003e52 dB(A)\u003c\/strong\u003e. For installations in dense urban environments, these figures must be combined with a good mechanical installation. Even a relatively quiet machine can become bothersome if installed on a poorly secured support, too close to a bedroom window, or on a structure that transmits vibrations.\u003c\/p\u003e\n\u003cp data-start=\"6847\" data-end=\"6910\"\u003eAt AirGreen, we therefore pay particular attention to:\u003c\/p\u003e\n\u003cul data-start=\"6912\" data-end=\"7212\"\u003e\n\u003cli data-section-id=\"brzuoq\" data-start=\"6912\" data-end=\"6963\"\u003ethe quality of the wall or ground mount;\u003c\/li\u003e\n\u003cli data-section-id=\"aed0s1\" data-start=\"6964\" data-end=\"7017\"\u003ethe use of suitable anti-vibration pads;\u003c\/li\u003e\n\u003cli data-section-id=\"1f3hkbp\" data-start=\"7018\" data-end=\"7058\"\u003ethe location relative to neighbors;\u003c\/li\u003e\n\u003cli data-section-id=\"h6btcn\" data-start=\"7059\" data-end=\"7091\"\u003ethe distance from bedrooms;\u003c\/li\u003e\n\u003cli data-section-id=\"iilfza\" data-start=\"7092\" data-end=\"7133\"\u003ethe protection of refrigerant lines;\u003c\/li\u003e\n\u003cli data-section-id=\"1qjmikq\" data-start=\"7134\" data-end=\"7212\"\u003ecompliance with necessary clearances around the outdoor unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"7214\" data-end=\"7285\"\u003eThe goal is to obtain a discreet, stable, and easy-to-maintain system.\u003c\/p\u003e\n\u003ch3 data-section-id=\"evdkn0\" data-start=\"7287\" data-end=\"7340\"\u003eInstallation: the details that make the difference\u003c\/h3\u003e\n\u003cp data-start=\"7342\" data-end=\"7817\"\u003eThe brochure mentions \u003cstrong data-start=\"7382\" data-end=\"7414\"\u003e1\/4 inch piping for the liquid line\u003c\/strong\u003e and \u003cstrong data-start=\"7418\" data-end=\"7446\"\u003e3\/8 inch for the gas line\u003c\/strong\u003e, a minimum piping length of \u003cstrong data-start=\"7487\" data-end=\"7496\"\u003e10 ft\u003c\/strong\u003e, a maximum length of \u003cstrong data-start=\"7523\" data-end=\"7533\"\u003e100 ft\u003c\/strong\u003e, and a maximum vertical height of \u003cstrong data-start=\"7571\" data-end=\"7580\"\u003e60 ft\u003c\/strong\u003e. This data is important for an \u003cstrong data-start=\"7622\" data-end=\"7643\"\u003eHVAC installation\u003c\/strong\u003e in typical \u003cstrong data-start=\"7675\" data-end=\"7687\"\u003eMontreal\u003c\/strong\u003e buildings, where brick walls, narrow courtyards, balconies, and paths to the electrical panel can complicate the route.\u003c\/p\u003e\n\u003cp data-start=\"7819\" data-end=\"8130\"\u003eThe electrical supply is \u003cstrong data-start=\"7852\" data-end=\"7877\"\u003e208-230V \/ 60Hz \/ 1Ph\u003c\/strong\u003e, with a minimum circuit ampacity of \u003cstrong data-start=\"7920\" data-end=\"7927\"\u003e12A\u003c\/strong\u003e and a maximum protection of \u003cstrong data-start=\"7958\" data-end=\"7965\"\u003e15A\u003c\/strong\u003e. In practice, this means checking the electrical panel, the wire path, available space for a breaker, and installation compliance.\u003c\/p\u003e\n\u003cp data-start=\"8132\" data-end=\"8181\"\u003eA well-done installation generally includes:\u003c\/p\u003e\n\u003col data-start=\"8183\" data-end=\"9352\"\u003e\n\u003cli data-section-id=\"1ml56wa\" data-start=\"8183\" data-end=\"8367\"\u003e\n\u003cstrong data-start=\"8186\" data-end=\"8228\"\u003eValidation of indoor positioning\u003c\/strong\u003e\u003cbr data-start=\"8228\" data-end=\"8231\"\u003eWe choose a wall that allows for good air diffusion, without blowing directly onto a bed, sofa, or work table.\u003c\/li\u003e\n\u003cli data-section-id=\"1gqb54\" data-start=\"8369\" data-end=\"8558\"\u003e\n\u003cstrong data-start=\"8372\" data-end=\"8413\"\u003eValidation of outdoor location\u003c\/strong\u003e\u003cbr data-start=\"8413\" data-end=\"8416\"\u003eThe unit must breathe correctly, remain accessible for \u003cstrong data-start=\"8480\" data-end=\"8498\"\u003eHVAC maintenance\u003c\/strong\u003e, and be protected against excessive snow accumulation.\u003c\/li\u003e\n\u003cli data-section-id=\"1qdykjo\" data-start=\"8560\" data-end=\"8819\"\u003e\n\u003cstrong data-start=\"8563\" data-end=\"8590\"\u003eRespect for clearances\u003c\/strong\u003e\u003cbr data-start=\"8590\" data-end=\"8593\"\u003eThe sheet indicates that the outdoor unit must be placed a minimum of \u003cstrong data-start=\"8669\" data-end=\"8709\"\u003e18 in \/ 45 cm above surfaces\u003c\/strong\u003e to allow for snow clearance and drainage during defrosting. This is a crucial point in Quebec.\u003c\/li\u003e\n\u003cli data-section-id=\"17vau9h\" data-start=\"8821\" data-end=\"9007\"\u003e\n\u003cstrong data-start=\"8824\" data-end=\"8857\"\u003eCondensate drain management\u003c\/strong\u003e\u003cbr data-start=\"8857\" data-end=\"8860\"\u003ePoor drainage can cause leaks, stains, odors, or freezing. We plan the slope and drain exit from the start.\u003c\/li\u003e\n\u003cli data-section-id=\"1pmisc\" data-start=\"9009\" data-end=\"9233\"\u003e\n\u003cstrong data-start=\"9012\" data-end=\"9059\"\u003eVacuuming and refrigerant check\u003c\/strong\u003e\u003cbr data-start=\"9059\" data-end=\"9062\"\u003eSerious commissioning is not limited to plugging in the machine. The circuit must be properly prepared to protect the compressor and maintain performance.\u003c\/li\u003e\n\u003cli data-section-id=\"11ny3rf\" data-start=\"9235\" data-end=\"9352\"\u003e\n\u003cstrong data-start=\"9238\" data-end=\"9261\"\u003eAesthetic finish\u003c\/strong\u003e\u003cbr data-start=\"9261\" data-end=\"9264\"\u003eThe lines must be protected, straight, clean, and well integrated into the building.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-start=\"9354\" data-end=\"9488\"\u003eIn many residential projects, these are precisely the steps that separate a correct installation from a durable one.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1evjest\" data-start=\"9490\" data-end=\"9598\"\u003eAn interesting solution for homeowners seeking comfort, subsidies, and peace of mind\u003c\/h2\u003e\n\u003cp data-start=\"9600\" data-end=\"10113\"\u003eThe KINGHOME Charmo R32 12,000 BTU is also appealing because it is eligible for a \u003cstrong data-start=\"9689\" data-end=\"9736\"\u003e$1,164 provincial LogisVert subsidy\u003c\/strong\u003e, according to the information displayed on your product page updated on November 26, 2025. For many clients, this financial aid changes the overall project calculation. It can make the purchase of a wall-mounted heat pump more accessible, especially when comparing the net cost after subsidy with potential savings on traditional electric heating use.\u003c\/p\u003e\n\u003cp data-start=\"10115\" data-end=\"10598\"\u003eIn our conversations with clients, we always emphasize one point: eligibility depends on the model, context, applicant, and program conditions at the time of application. Therefore, it is essential to keep documents, the paid invoice, model numbers, and required information. At AirGreen, we prepare clear quotes so that the client can fully understand what is being installed and what information will be needed for the application.\u003c\/p\u003e\n\u003ch3 data-section-id=\"adohed\" data-start=\"10600\" data-end=\"10648\"\u003eWiFi included and useful daily functions\u003c\/h3\u003e\n\u003cp data-start=\"10650\" data-end=\"11003\"\u003e\u003cstrong data-start=\"10653\" data-end=\"10668\"\u003eWiFi included\u003c\/strong\u003e has become an important criterion for many customers. Being able to adjust the temperature remotely, program usage, or check system operation allows for smarter use. For a cottage, a rental unit, a home office, or a condo, this function can truly enhance the experience.\u003c\/p\u003e\n\u003cp data-start=\"11005\" data-end=\"11082\"\u003eThe indoor unit's data sheet also mentions several included functions:\u003c\/p\u003e\n\u003cul data-start=\"11084\" data-end=\"11262\"\u003e\n\u003cli data-section-id=\"g95h97\" data-start=\"11084\" data-end=\"11100\"\u003eWiFi control;\u003c\/li\u003e\n\u003cli data-section-id=\"xkisxw\" data-start=\"11101\" data-end=\"11118\"\u003e8 °C heating;\u003c\/li\u003e\n\u003cli data-section-id=\"16ve3gl\" data-start=\"11119\" data-end=\"11137\"\u003eI-Feel function;\u003c\/li\u003e\n\u003cli data-section-id=\"t9iwkv\" data-start=\"11138\" data-end=\"11155\"\u003eself-cleaning;\u003c\/li\u003e\n\u003cli data-section-id=\"1tumt0m\" data-start=\"11156\" data-end=\"11174\"\u003eforced defrosting;\u003c\/li\u003e\n\u003cli data-section-id=\"1m64iwz\" data-start=\"11175\" data-end=\"11198\"\u003esoft start;\u003c\/li\u003e\n\u003cli data-section-id=\"6kby7n\" data-start=\"11199\" data-end=\"11227\"\u003elow voltage start-up;\u003c\/li\u003e\n\u003cli data-section-id=\"eop2z3\" data-start=\"11228\" data-end=\"11262\"\u003einfrared remote control included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"11264\" data-end=\"11552\"\u003eThe \u003cstrong data-start=\"11276\" data-end=\"11286\"\u003eI-Feel\u003c\/strong\u003e function, when used correctly, can help better adjust comfort around the occupied area. Self-cleaning can also help keep the unit cleaner between maintenance, although this does not replace proper periodic \u003cstrong data-start=\"11522\" data-end=\"11540\"\u003eHVAC maintenance\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1uvibwe\" data-start=\"11554\" data-end=\"11628\"\u003eCommon mistakes to avoid with a 12,000 BTU wall-mounted heat pump\u003c\/h3\u003e\n\u003cp data-start=\"11630\" data-end=\"11745\"\u003eWe often see the same mistakes in existing installations that clients ask us to correct.\u003c\/p\u003e\n\u003cp data-start=\"11747\" data-end=\"12050\"\u003eThe first mistake is choosing capacity based solely on surface area, without considering insulation, solar orientation, the number of windows, and air circulation. A very windowed room in \u003cstrong data-start=\"11959\" data-end=\"11971\"\u003eMontreal\u003c\/strong\u003e may require a different approach than a well-insulated basement in \u003cstrong data-start=\"12040\" data-end=\"12049\"\u003eLaval\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"12052\" data-end=\"12435\"\u003eThe second mistake is placing the indoor unit too close to an obstacle. A bookshelf, a beam, a return wall, or a ceiling that is too low can impede airflow. The brochure mentions minimum clearances around the indoor unit, including about \u003cstrong data-start=\"12316\" data-end=\"12351\"\u003e6 inches on the sides and above\u003c\/strong\u003e, as well as significant clearance in front of the unit to avoid blocking airflow.\u003c\/p\u003e\n\u003cp data-start=\"12437\" data-end=\"12715\"\u003eThe third mistake is installing the outdoor unit too low. In Quebec, snow, ice, and defrost water must be considered from the outset. A unit placed too close to the ground can become blocked in winter, which reduces performance and can cause shutdowns.\u003c\/p\u003e\u003cp data-start=\"12717\" data-end=\"13007\"\u003eThe fourth mistake is neglecting after-sales service. A wall-mounted heat pump is a mechanical device. It must be installed by competent refrigeration technicians, but it must also remain accessible for inspection, cleaning, checks, and eventual repairs.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1qagpis\" data-start=\"13009\" data-end=\"13067\"\u003eRealistic installation example: a condo in Longueuil\u003c\/h3\u003e\n\u003cp data-start=\"13069\" data-end=\"13394\"\u003eA typical case we encounter in \u003cstrong data-start=\"13107\" data-end=\"13120\"\u003eLongueuil\u003c\/strong\u003e: a client lives in a medium-sized condo with an open-plan living room-kitchen, electric baseboard heaters, and intense summer heat on the sunny side. They don't want to transform the entire dwelling, but they desire an effective solution for the main room.\u003c\/p\u003e\n\u003cp data-start=\"13396\" data-end=\"13984\"\u003eIn this type of scenario, a \u003cstrong data-start=\"13426\" data-end=\"13459\"\u003e12,000 BTU wall-mounted heat pump\u003c\/strong\u003e can be an excellent choice if the configuration allows. The indoor unit is positioned to project air towards the open area, rather than directly at the couch. The outdoor unit is installed on an appropriate bracket, with special attention to noise and clearance. The routing of the pipes is planned to minimize visual impact. The client then gets a system capable of quickly air-conditioning the space in summer and providing efficient heating for a large part of the cold season.\u003c\/p\u003e\n\u003cp data-start=\"13986\" data-end=\"14259\"\u003eThis kind of installation seems simple on paper, but its success depends on several details: wall height, access to the electrical panel, line length, drain outlet, type of exterior cladding, and the unit's position relative to neighbors.\u003c\/p\u003e\n\u003ch3 data-section-id=\"zl2hdc\" data-start=\"14261\" data-end=\"14312\"\u003eWhy have this model installed by AirGreen\u003c\/h3\u003e\n\u003cp data-start=\"14314\" data-end=\"14638\"\u003eAirGreen is not just a heat pump seller. We are an \u003cstrong data-start=\"14413\" data-end=\"14421\"\u003eHVAC\u003c\/strong\u003e specialized company that intervenes daily on residential, commercial, and multi-housing projects in Greater Montreal. Our advantage lies in on-site analysis, installation quality, and after-sales service.\u003c\/p\u003e\n\u003cp data-start=\"14640\" data-end=\"14754\"\u003eFor the \u003cstrong data-start=\"14648\" data-end=\"14707\"\u003eKINGHOME Charmo R32 Wall-Mounted Heat Pump | 12000 BTU 220V\u003c\/strong\u003e, we pay particular attention to:\u003c\/p\u003e\n\u003cul data-start=\"14756\" data-end=\"15063\"\u003e\n\u003cli data-section-id=\"1bj1cwx\" data-start=\"14756\" data-end=\"14790\"\u003ethe selection of the right location;\u003c\/li\u003e\n\u003cli data-section-id=\"1vlcwp5\" data-start=\"14791\" data-end=\"14831\"\u003ecompliance with technical clearances;\u003c\/li\u003e\n\u003cli data-section-id=\"1a0yhup\" data-start=\"14832\" data-end=\"14873\"\u003ethe aesthetic integration of conduits;\u003c\/li\u003e\n\u003cli data-section-id=\"shtsxy\" data-start=\"14874\" data-end=\"14903\"\u003eelectrical verification;\u003c\/li\u003e\n\u003cli data-section-id=\"1xuxkvm\" data-start=\"14904\" data-end=\"14941\"\u003eprofessional commissioning;\u003c\/li\u003e\n\u003cli data-section-id=\"1e6xw0m\" data-start=\"14942\" data-end=\"14971\"\u003eclarity of the quote;\u003c\/li\u003e\n\u003cli data-section-id=\"1e2meck\" data-start=\"14972\" data-end=\"15012\"\u003eexplanation of functions to the client;\u003c\/li\u003e\n\u003cli data-section-id=\"17nnk5k\" data-start=\"15013\" data-end=\"15063\"\u003eavailability for maintenance and service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"15065\" data-end=\"15338\"\u003eWe also know that a client doesn't just compare technical specifications. They compare peace of mind. A well-installed heat pump often costs less in the long run than a poorly positioned, noisy, difficult-to-maintain, or carelessly installed unit.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1xho7r4\" data-start=\"15340\" data-end=\"15408\"\u003eWarranty and maintenance: thinking beyond installation day\u003c\/h3\u003e\n\u003cp data-start=\"15410\" data-end=\"15888\"\u003eThe product page indicates a \u003cstrong data-start=\"15447\" data-end=\"15505\"\u003e12-year compressor, 12-year parts, and 0-year labor\u003c\/strong\u003e warranty, with possible additional warranty. The manufacturer's sheet also specifies a standard 7-year parts and compressor warranty, as well as a registered 12-year parts and compressor warranty, according to applicable conditions. For the client, this means understanding the difference between the parts warranty, the compressor warranty, and labor.\u003c\/p\u003e\n\u003cp data-start=\"15890\" data-end=\"16257\"\u003e\u003cstrong data-start=\"15892\" data-end=\"15910\"\u003eHVAC maintenance\u003c\/strong\u003e remains essential to preserve performance. Filters must be cleaned, the indoor unit must remain clean, the outdoor coil must be clear, and drains must be checked. In areas with a lot of dust, pollen, pet hair, or urban traffic, maintenance becomes even more important.\u003c\/p\u003e\n\u003cp data-start=\"16259\" data-end=\"16290\"\u003eGood maintenance can help to:\u003c\/p\u003e\n\u003cul data-start=\"16292\" data-end=\"16496\"\u003e\n\u003cli data-section-id=\"1v3oabz\" data-start=\"16292\" data-end=\"16327\"\u003emaintain adequate airflow;\u003c\/li\u003e\n\u003cli data-section-id=\"vfthif\" data-start=\"16328\" data-end=\"16349\"\u003ereduce odors;\u003c\/li\u003e\n\u003cli data-section-id=\"v747c4\" data-start=\"16350\" data-end=\"16388\"\u003elimit dust accumulation;\u003c\/li\u003e\n\u003cli data-section-id=\"1uzuzml\" data-start=\"16389\" data-end=\"16412\"\u003eimprove comfort;\u003c\/li\u003e\n\u003cli data-section-id=\"k000ia\" data-start=\"16413\" data-end=\"16451\"\u003ereduce the risk of water leaks;\u003c\/li\u003e\n\u003cli data-section-id=\"1w9frtk\" data-start=\"16452\" data-end=\"16496\"\u003eprolong equipment life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"rb74rl\" data-start=\"16498\" data-end=\"16581\"\u003eA relevant choice for Montreal, Laval, Longueuil, the North Shore, and the South Shore\u003c\/h3\u003e\n\u003cp data-start=\"16583\" data-end=\"16983\"\u003eThe KINGHOME Charmo R32 12,000 BTU is a serious option for customers who want a compact, modern \u003cstrong data-start=\"16674\" data-end=\"16696\"\u003ewall-mounted heat pump\u003c\/strong\u003e eligible for a significant subsidy. Its heating capacity down to \u003cstrong data-start=\"16793\" data-end=\"16803\"\u003e-25 °C\u003c\/strong\u003e, its \u003cstrong data-start=\"16809\" data-end=\"16817\"\u003eR-32\u003c\/strong\u003e, its \u003cstrong data-start=\"16823\" data-end=\"16838\"\u003eincluded WiFi\u003c\/strong\u003e, its practical dimensions, and its \u003cstrong data-start=\"16885\" data-end=\"16914\"\u003eENERGY STAR® Cold Climate\u003c\/strong\u003e certification make it a product well-aligned with the needs of the Quebec market.\u003c\/p\u003e\n\u003cp data-start=\"16985\" data-end=\"17241\"\u003eAt AirGreen, we always recommend validating the project with a complete space analysis. A good heat pump must be well chosen, but most importantly, well installed. It is this combination that yields a comfortable, efficient, and durable result.\u003c\/p\u003e\n\u003cp data-start=\"17243\" data-end=\"17643\"\u003eTo get a clear estimate, verify model eligibility, compare available options, or plan an installation of a \u003cstrong data-start=\"17381\" data-end=\"17440\"\u003eKINGHOME Charmo R32 Wall-Mounted Heat Pump | 12000 BTU 220V\u003c\/strong\u003e, contact AirGreen directly. Our team serves \u003cstrong data-start=\"17495\" data-end=\"17507\"\u003eMontreal\u003c\/strong\u003e, \u003cstrong data-start=\"17509\" data-end=\"17518\"\u003eLaval\u003c\/strong\u003e, \u003cstrong data-start=\"17520\" data-end=\"17533\"\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong data-start=\"17538\" data-end=\"17551\"\u003eNorth Shore\u003c\/strong\u003e, the \u003cstrong data-start=\"17556\" data-end=\"17568\"\u003eSouth Shore\u003c\/strong\u003e, and \u003cstrong data-start=\"17575\" data-end=\"17589\"\u003eMontérégie\u003c\/strong\u003e with HVAC solutions adapted to local buildings.\u003c\/p\u003e","brand":"Kinghome","offers":[{"title":"Default Title","offer_id":53811205931300,"sku":"KW12HQ19CDO","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/KINGHOMECHARMOR32THERMOPOMPEMURALE_9cc6a48f-8c22-419c-9fc1-81d70d255e2c.png?v=1780497520","url":"https:\/\/airgreen.ca\/en\/products\/thermopompe-murale-kinghome-charmo-r32-12000-btu-220v","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}