{"product_id":"thermopompe-murale-kinghome-charmo-r32-24000-btu","title":"KINGHOME Charmo R32 Wall-Mounted Heat Pump | 24000 BTU","description":"\u003ch2 data-section-id=\"p62kjg\" data-start=\"71\" data-end=\"145\"\u003eA 24,000 BTU wall-mounted solution designed for large Quebec spaces\u003c\/h2\u003e\n\u003cp data-start=\"147\" data-end=\"692\"\u003eFor an open-plan house, a spacious condo, a duplex, a local business, or a main area that is difficult to stabilize, a \u003cstrong data-start=\"277\" data-end=\"310\"\u003e24,000 BTU wall-mounted heat pump\u003c\/strong\u003e can make a very tangible difference in daily comfort. The \u003cstrong data-start=\"381\" data-end=\"435\"\u003eKINGHOME Charmo R32 | 24000 BTU Wall-Mounted Heat Pump\u003c\/strong\u003e stands out as an interesting option for homeowners seeking a solution that is both high-performing in air conditioning, useful for supplemental or primary heating depending on the configuration, and eligible for a significant provincial subsidy.\u003c\/p\u003e\n\u003cp data-start=\"694\" data-end=\"1379\"\u003eAt AirGreen, we primarily evaluate it for projects where a 12,000 or 18,000 BTU unit would be insufficient: large open-plan living rooms, main floors with higher ceilings, retail businesses, professional offices, dwellings with high sun exposure, or replacing an old wall-mounted system that no longer meets the building's actual demands. Its \u003cstrong data-start=\"1063\" data-end=\"1077\"\u003e24,000 BTU\u003c\/strong\u003e capacity, \u003cstrong data-start=\"1099\" data-end=\"1107\"\u003eR-32\u003c\/strong\u003e refrigerant gas, \u003cstrong data-start=\"1120\" data-end=\"1149\"\u003eENERGY STAR® Cold Climate\u003c\/strong\u003e status, included WiFi, and a LogisVert subsidy announced at \u003cstrong data-start=\"1205\" data-end=\"1216\"\u003e$2,304\u003c\/strong\u003e make it a machine to seriously consider for many HVAC installations in \u003cstrong data-start=\"1299\" data-end=\"1311\"\u003eMontreal\u003c\/strong\u003e, \u003cstrong data-start=\"1313\" data-end=\"1322\"\u003eLaval\u003c\/strong\u003e, \u003cstrong data-start=\"1324\" data-end=\"1337\"\u003eLongueuil\u003c\/strong\u003e, on the \u003cstrong data-start=\"1346\" data-end=\"1359\"\u003eNorth Shore\u003c\/strong\u003e and the \u003cstrong data-start=\"1366\" data-end=\"1378\"\u003eSouth Shore\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-section-id=\"19lhsad\" data-start=\"1381\" data-end=\"1445\"\u003eHeating capacity adapted to Quebec's real winters\u003c\/h3\u003e\n\u003cp data-start=\"1447\" data-end=\"1948\"\u003eThe technical specifications of this KINGHOME Charmo indicate a heating capacity down to \u003cstrong data-start=\"1533\" data-end=\"1543\"\u003e-25 °C\u003c\/strong\u003e, with a nominal heating power of \u003cstrong data-start=\"1589\" data-end=\"1603\"\u003e24,000 BTU\u003c\/strong\u003e. More precisely, the technical documentation indicates a heating capacity of \u003cstrong data-start=\"1687\" data-end=\"1710\"\u003e22,400 BTU at 8.3 °C\u003c\/strong\u003e, \u003cstrong data-start=\"1712\" data-end=\"1736\"\u003e19,200 BTU at -8.3 °C\u003c\/strong\u003e, and \u003cstrong data-start=\"1740\" data-end=\"1763\"\u003e16,800 BTU at -15 °C\u003c\/strong\u003e. These figures are important as they provide a better understanding of the unit's actual performance when the temperature drops below zero.\u003c\/p\u003e\n\u003cp data-start=\"1950\" data-end=\"2413\"\u003eIn several homes in the \u003cstrong data-start=\"1989\" data-end=\"2001\"\u003eMontreal\u003c\/strong\u003e area, we see the same scenario: clients want to reduce their electric baseboard usage, stabilize a large open room, and avoid temperature differences between the living room, kitchen, and dining room. A 24,000 BTU wall-mounted heat pump alone won't solve everything in a highly compartmentalized house, but in a well-cleared area, it can offer very interesting performance.\u003c\/p\u003e\n\u003cp data-start=\"2415\" data-end=\"2913\"\u003eDuring a well-planned \u003cstrong data-start=\"2426\" data-end=\"2447\"\u003eHVAC installation\u003c\/strong\u003e, the placement of the indoor unit becomes as important as the choice of machine. A 24,000 BTU wall-mounted unit moves a lot of air. Therefore, it should be avoided placing it directly above a sofa, facing a kitchen table, or in a too-narrow hallway. The KINGHOME Charmo 24,000 BTU has automatic vertical and horizontal louvers, which facilitates air distribution, but positioning analysis remains essential.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1v1jp6u\" data-start=\"2915\" data-end=\"2996\"\u003eR-32, included WiFi, and seasonal efficiency: what changes daily\u003c\/h3\u003e\n\u003cp data-start=\"2998\" data-end=\"3323\"\u003eThis \u003cstrong data-start=\"3004\" data-end=\"3035\"\u003eKINGHOME wall-mounted heat pump\u003c\/strong\u003e uses \u003cstrong data-start=\"3059\" data-end=\"3067\"\u003eR-32\u003c\/strong\u003e refrigerant, increasingly present in modern wall-mounted systems. This gas is valued for its energy efficiency and its more favorable environmental profile than several older refrigerants used in previous generations of heat pumps.\u003c\/p\u003e\n\u003cp data-start=\"3325\" data-end=\"3580\"\u003eThe \u003cstrong data-start=\"3328\" data-end=\"3343\"\u003eincluded WiFi\u003c\/strong\u003e is also a practical advantage. For many AirGreen clients, especially those who own a multiplex, a rental condo, an office, or a secondary residence, remote control quickly becomes a useful tool. It allows you to:\u003c\/p\u003e\n\u003cul data-start=\"3582\" data-end=\"3850\"\u003e\n\u003cli data-section-id=\"13162nv\" data-start=\"3582\" data-end=\"3637\"\u003ereduce the temperature when the space is unoccupied;\u003c\/li\u003e\n\u003cli data-section-id=\"1eyd3t\" data-start=\"3638\" data-end=\"3685\"\u003epreheat or pre-cool before arrival;\u003c\/li\u003e\n\u003cli data-section-id=\"za83c6\" data-start=\"3686\" data-end=\"3741\"\u003eavoid leaving the appliance running unnecessarily;\u003c\/li\u003e\n\u003cli data-section-id=\"w38z8z\" data-start=\"3742\" data-end=\"3790\"\u003eadjust comfort without being on site;\u003c\/li\u003e\n\u003cli data-section-id=\"13d294s\" data-start=\"3791\" data-end=\"3850\"\u003ebetter manage heatwaves or intense cold periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"3852\" data-end=\"4240\"\u003eThe technical documentation also indicates integrated functions such as \u003cstrong data-start=\"3930\" data-end=\"3945\"\u003eI-Feel mode\u003c\/strong\u003e, \u003cstrong data-start=\"3950\" data-end=\"3964\"\u003eself-clean\u003c\/strong\u003e, \u003cstrong data-start=\"3969\" data-end=\"3988\"\u003eforced defrost\u003c\/strong\u003e, \u003cstrong data-start=\"3993\" data-end=\"4007\"\u003esoft start\u003c\/strong\u003e, low voltage startup, and 8 °C heating. These details are often overlooked during a quick purchase, but they can make a real difference in daily use, especially in a climate like that of Greater Montreal.\u003c\/p\u003e\n\u003ch3 data-section-id=\"18xlpw0\" data-start=\"4242\" data-end=\"4293\"\u003eAn ENERGY STAR® Cold Climate certified machine\u003c\/h3\u003e\n\u003cp data-start=\"4295\" data-end=\"4646\"\u003eThe KINGHOME Charmo 24,000 BTU is listed as \u003cstrong data-start=\"4344\" data-end=\"4360\"\u003eENERGY STAR®\u003c\/strong\u003e and \u003cstrong data-start=\"4364\" data-end=\"4393\"\u003eENERGY STAR® Cold Climate\u003c\/strong\u003e, with AHRI number \u003cstrong data-start=\"4415\" data-end=\"4428\"\u003e217995506\u003c\/strong\u003e and ENERGY STAR identifier \u003cstrong data-start=\"4458\" data-end=\"4469\"\u003e4515403\u003c\/strong\u003e. For a homeowner comparing several models, this certification is a reassuring point, as it confirms that the appliance meets recognized performance criteria.\u003c\/p\u003e\n\u003cp data-start=\"4648\" data-end=\"4726\"\u003eIn terms of efficiency data, the technical sheet notably mentions:\u003c\/p\u003e\n\u003cul data-start=\"4728\" data-end=\"4802\"\u003e\n\u003cli data-section-id=\"1j92xmx\" data-start=\"4728\" data-end=\"4744\"\u003e\u003cstrong data-start=\"4730\" data-end=\"4744\"\u003eSEER2: 19\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"njm3w\" data-start=\"4745\" data-end=\"4762\"\u003e\u003cstrong data-start=\"4747\" data-end=\"4762\"\u003eHSPF2: 8.5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"a7i8md\" data-start=\"4763\" data-end=\"4782\"\u003e\u003cstrong data-start=\"4765\" data-end=\"4782\"\u003eEER: 3.5 W\/W\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"1u5mqp4\" data-start=\"4783\" data-end=\"4802\"\u003e\u003cstrong data-start=\"4785\" data-end=\"4802\"\u003eCOP: 3.6 W\/W\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"4804\" data-end=\"5225\"\u003eThese values must be interpreted in the context of the project. A well-installed, properly sized, and well-maintained wall-mounted heat pump will generally yield better results than a more expensive machine installed in the wrong place or with poorly prepared piping. At AirGreen, we often emphasize this point: the final performance depends on the product, but also on the quality of the \u003cstrong data-start=\"5203\" data-end=\"5224\"\u003eHVAC installation\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 data-section-id=\"di614j\" data-start=\"5227\" data-end=\"5285\"\u003eLogisVert subsidy: a significant financial advantage\u003c\/h3\u003e\n\u003cp data-start=\"5287\" data-end=\"5518\"\u003eAccording to the information currently displayed for this product, the announced \u003cstrong data-start=\"5353\" data-end=\"5389\"\u003eprovincial LogisVert subsidy\u003c\/strong\u003e is \u003cstrong data-start=\"5406\" data-end=\"5417\"\u003e$2,304\u003c\/strong\u003e. For a 24,000 BTU wall-mounted heat pump, this amount can strongly influence the net cost of the project.\u003c\/p\u003e\n\u003cp data-start=\"5520\" data-end=\"5933\"\u003eHowever, we always remind our clients that final eligibility depends on the program's conditions, the building, the applicant, the invoice, the installed model, and the criteria in effect at the time of application. At AirGreen, we prepare clear invoices, with the indoor and outdoor models, relevant numbers, and necessary information to facilitate the client's process.\u003c\/p\u003e\n\u003cp data-start=\"5935\" data-end=\"6203\"\u003eFor homeowners in \u003cstrong data-start=\"5960\" data-end=\"5972\"\u003eMontreal\u003c\/strong\u003e, \u003cstrong data-start=\"5974\" data-end=\"5983\"\u003eLaval\u003c\/strong\u003e, \u003cstrong data-start=\"5985\" data-end=\"5998\"\u003eLongueuil\u003c\/strong\u003e, in \u003cstrong data-start=\"6003\" data-end=\"6017\"\u003eMontérégie\u003c\/strong\u003e, on the \u003cstrong data-start=\"6026\" data-end=\"6039\"\u003eNorth Shore\u003c\/strong\u003e or the \u003cstrong data-start=\"6046\" data-end=\"6058\"\u003eSouth Shore\u003c\/strong\u003e, this subsidy can make the KINGHOME Charmo 24,000 BTU particularly competitive compared to other machines of comparable capacity.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1bm8yln\" data-start=\"6205\" data-end=\"6281\"\u003eTechnical installation: the details that prevent problems later\u003c\/h3\u003e\n\u003cp data-start=\"6283\" data-end=\"6758\"\u003eA 24,000 BTU wall-mounted heat pump requires a serious installation. It's not just a matter of fixing a unit to the wall and connecting two pipes. Technical information indicates \u003cstrong data-start=\"6499\" data-end=\"6518\"\u003e1\/4 in - 1\/2 in\u003c\/strong\u003e piping, \u003cstrong data-start=\"6537\" data-end=\"6562\"\u003e208-230V \/ 60Hz \/ 1Ph\u003c\/strong\u003e power supply, a minimum circuit ampacity of \u003cstrong data-start=\"6600\" data-end=\"6607\"\u003e15A\u003c\/strong\u003e, and a maximum overcurrent protection of \u003cstrong data-start=\"6654\" data-end=\"6661\"\u003e20A\u003c\/strong\u003e. The recommended power wire is indicated as \u003cstrong data-start=\"6711\" data-end=\"6723\"\u003e12\/3 AWG\u003c\/strong\u003e, with \u003cstrong data-start=\"6745\" data-end=\"6757\"\u003e14\/4 AWG\u003c\/strong\u003e interconnection.\u003c\/p\u003e\n\u003cp data-start=\"6760\" data-end=\"7262\"\u003eThese details must be validated on-site, especially during a replacement. In older homes in \u003cstrong data-start=\"6871\" data-end=\"6883\"\u003eMontreal\u003c\/strong\u003e, multiplexes in \u003cstrong data-start=\"6897\" data-end=\"6910\"\u003eLongueuil\u003c\/strong\u003e, bungalows in \u003cstrong data-start=\"6929\" data-end=\"6938\"\u003eLaval\u003c\/strong\u003e, or properties on the \u003cstrong data-start=\"6963\" data-end=\"6975\"\u003eSouth Shore\u003c\/strong\u003e, we sometimes find existing circuits that do not perfectly match the needs of the new system. In other cases, the old outdoor location does not offer the necessary clearances, or the existing line cannot be reused without thorough verification.\u003c\/p\u003e\n\u003cp data-start=\"7264\" data-end=\"7593\"\u003eAt AirGreen, when reuse of piping is considered, we check the condition of the lines, diameter, routing, insulation, access, and compatibility with the new refrigerant. An apparent saving can become costly if the lines are contaminated, crushed, too long, poorly insulated, or inadequately protected.\u003c\/p\u003e\n\u003ch3 data-section-id=\"170jq9v\" data-start=\"7595\" data-end=\"7670\"\u003eOutdoor Clearances: A Crucial Point for Snow and Defrosting\u003c\/h3\u003e\n\u003cp data-start=\"7672\" data-end=\"7935\"\u003eThe technical documentation specifies that the outdoor unit must be placed a minimum of \u003cstrong data-start=\"7763\" data-end=\"7799\"\u003e18 inches above surfaces\u003c\/strong\u003e to allow for snow clearance and defrost water drainage. This is a particularly important point in Quebec.\u003c\/p\u003e\n\u003cp data-start=\"7937\" data-end=\"8379\"\u003eIn winter, a heat pump produces water during defrost cycles. If the unit is installed too low, ice accumulation can block airflow, strain the compressor, increase noise, reduce efficiency, and, in some cases, cause shutdowns. This is why we often recommend a wall mount or a sufficiently high ground mount, depending on the building, access, aesthetics, and available structure.\u003c\/p\u003e\n\u003cp data-start=\"8381\" data-end=\"8713\"\u003eClearances around the outdoor unit must also be respected. A unit placed too close to a wall, fence, hedge, or balcony can lose efficiency. For a \u003cstrong data-start=\"8581\" data-end=\"8595\"\u003e24,000 BTU\u003c\/strong\u003e machine, the volume of air discharged is considerable; therefore, the necessary space must be provided for it to breathe properly.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1sxlwoy\" data-start=\"8715\" data-end=\"8786\"\u003eSound level: what you need to know before choosing the location\u003c\/h3\u003e\n\u003cp data-start=\"8788\" data-end=\"9064\"\u003eThe outdoor sound pressure level is indicated at \u003cstrong data-start=\"8841\" data-end=\"8853\"\u003e58 dB(A)\u003c\/strong\u003e. Indoors, the data sheet mentions levels varying according to fan speed, from \u003cstrong data-start=\"8945\" data-end=\"8957\"\u003e36 dB(A)\u003c\/strong\u003e in Sleep mode up to \u003cstrong data-start=\"8980\" data-end=\"8992\"\u003e51 dB(A)\u003c\/strong\u003e in Turbo mode. Airflow can reach \u003cstrong data-start=\"9038\" data-end=\"9049\"\u003e677 CFM\u003c\/strong\u003e in Turbo mode.\u003c\/p\u003e\n\u003cp data-start=\"9066\" data-end=\"9413\"\u003eIn a living room or open area, these values are generally acceptable when the intended use is well understood. However, for a bedroom, a very quiet office, or a room where the unit would be placed too close to occupants, a 24,000 BTU capacity may be excessive. This is why an on-site evaluation is important.\u003c\/p\u003e\n\u003cp data-start=\"9415\" data-end=\"9870\"\u003eWe have seen clients request a very large unit, thinking it would automatically be more comfortable. In some cases, this is true. In others, an overly powerful machine in a small area can create short cycles, too direct airflow, or less uniform comfort. The right choice depends on the room's volume, insulation, building orientation, number of floors, internal openings, and lifestyle habits.\u003c\/p\u003e\n\u003ch3 data-section-id=\"152pqdk\" data-start=\"9872\" data-end=\"9942\"\u003eReal example: an open area difficult to stabilize in Longueuil\u003c\/h3\u003e\n\u003cp data-start=\"9944\" data-end=\"10255\"\u003eIn a recent project in \u003cstrong data-start=\"9968\" data-end=\"9981\"\u003eLongueuil\u003c\/strong\u003e, a client had a main area with a connected living room, kitchen, and dining room, but their old 18,000 BTU wall-mounted air conditioner was no longer sufficient during heatwaves. The building had large southwest-facing windows and a mezzanine that accumulated heat.\u003c\/p\u003e\n\u003cp data-start=\"10257\" data-end=\"10666\"\u003eAfter analysis, a 24,000 BTU wall-mounted unit became more logical than a simple replacement with identical capacity. The main challenge was not just power: it was necessary to avoid directing airflow towards the kitchen table, maintain reasonable access for \u003cstrong data-start=\"10529\" data-end=\"10547\"\u003eHVAC maintenance\u003c\/strong\u003e, provide a clean outdoor line, and position the compressor in a location that allowed for good winter clearance.\u003c\/p\u003e\n\u003cp data-start=\"10668\" data-end=\"10927\"\u003eThis is precisely the kind of situation where a KINGHOME Charmo 24,000 BTU can be relevant. The machine offers enough capacity to treat a large area, but it must be installed precisely to avoid discomfort due to misdirected airflow.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1ls6anx\" data-start=\"10929\" data-end=\"10984\"\u003eReal example: replacement in a multiplex in Montreal\u003c\/h3\u003e\n\u003cp data-start=\"10986\" data-end=\"11339\"\u003eIn several multiplexes in \u003cstrong data-start=\"11009\" data-end=\"11021\"\u003eMontreal\u003c\/strong\u003e, owners are looking to replace an old wall-mounted heat pump installed 12 to 18 years ago. The constraints are often the same: narrow rear access, visible line passage, electrical supply to be validated, outdoor unit placed in a shared courtyard, and the need to limit noise pollution.\u003c\/p\u003e\n\u003cp data-start=\"11341\" data-end=\"11813\"\u003eFor this type of project, the KINGHOME Charmo 24,000 BTU can be a good candidate when a spacious main dwelling needs heating or cooling. However, we pay particular attention to the exterior finishing: piping protection, drain slope, penetration sealing, clearance around the compressor, and strength of the support. A clean installation instills confidence in the owner, but it also facilitates after-sales service.\u003c\/p\u003e\n\u003ch3 data-section-id=\"q424kb\" data-start=\"11815\" data-end=\"11889\"\u003eCommon mistakes to avoid with a 24,000 BTU wall-mounted heat pump\u003c\/h3\u003e\n\u003cp data-start=\"11891\" data-end=\"12047\"\u003eA device of this capacity can yield excellent results, but certain errors frequently occur when the installation is not well planned.\u003c\/p\u003e\n\u003ch4 data-start=\"12049\" data-end=\"12095\"\u003eChoosing solely based on BTU count\u003c\/h4\u003e\n\u003cp data-start=\"12097\" data-end=\"12396\"\u003eBTU alone is not enough. Two houses of the same size can have very different needs. A well-insulated house with an open plan can be easy to treat. Another, older house, with multiple divisions, air leaks, and significant sun exposure, will require a different approach.\u003c\/p\u003e\n\u003ch4 data-start=\"12398\" data-end=\"12455\"\u003eInstalling the indoor unit too close to an obstruction\u003c\/h4\u003e\n\u003cp data-start=\"12457\" data-end=\"12777\"\u003eThe documentation indicates minimal clearances around the indoor unit. These clearances are not just aesthetic recommendations. They help the appliance correctly draw in and distribute air. A tall piece of furniture, a beam, a side wall that is too close, or a low ceiling can hinder performance.\u003c\/p\u003e\n\u003ch4 data-start=\"12779\" data-end=\"12814\"\u003eNeglecting drain flow\u003c\/h4\u003e\n\u003cp data-start=\"12816\" data-end=\"13038\"\u003eA poorly sloped or improperly protected drain can cause water leaks. At AirGreen, we pay particular attention to the drain's path, especially in installations where the indoor unit is far from the exterior wall.\u003c\/p\u003e\n\u003ch4 data-start=\"13040\" data-end=\"13075\"\u003ePlacing the compressor too low\u003c\/h4\u003e\n\u003cp data-start=\"13077\" data-end=\"13282\"\u003eIn Quebec, this point is critical. Snow, ice, and defrost water must be anticipated from the moment of installation. An outdoor unit placed too low can become problematic from the first serious winter.\u003c\/p\u003e\n\u003ch4 data-start=\"13284\" data-end=\"13308\"\u003eForgetting maintenance\u003c\/h4\u003e\n\u003cp data-start=\"13310\" data-end=\"13570\"\u003eEven a good heat pump loses efficiency if the filters, fan, evaporator, or condenser are dirty. Regular \u003cstrong data-start=\"13434\" data-end=\"13452\"\u003eHVAC maintenance\u003c\/strong\u003e helps maintain performance, reduce odors, limit noise, and extend the system's lifespan.\u003c\/p\u003e\n\u003ch3 data-section-id=\"186j1xb\" data-start=\"13572\" data-end=\"13625\"\u003eWhy choose AirGreen for this installation\u003c\/h3\u003e\n\u003cp data-start=\"13627\" data-end=\"13917\"\u003eAt AirGreen, we install wall-mounted, central, and multi-zone systems in various contexts: single-family homes, condos, multiplexes, businesses, offices, and rental properties. Our approach is based on a concrete analysis of the building rather than a generic recommendation.\u003c\/p\u003e\n\u003cp data-start=\"13919\" data-end=\"14009\"\u003eFor a \u003cstrong data-start=\"13928\" data-end=\"13981\"\u003eKINGHOME Charmo R32 24,000 BTU wall-mounted heat pump\u003c\/strong\u003e, we notably verify:\u003c\/p\u003e\u003cul data-start=\"14011\" data-end=\"14424\"\u003e\n\u003cli data-section-id=\"c73yhy\" data-start=\"14011\" data-end=\"14059\"\u003ethe area and configuration of the space;\u003c\/li\u003e\n\u003cli data-section-id=\"10r05kb\" data-start=\"14060\" data-end=\"14086\"\u003eceiling height;\u003c\/li\u003e\n\u003cli data-section-id=\"14np5hb\" data-start=\"14087\" data-end=\"14111\"\u003esolar orientation;\u003c\/li\u003e\n\u003cli data-section-id=\"71eer6\" data-start=\"14112\" data-end=\"14143\"\u003ethe condition of the electrical panel;\u003c\/li\u003e\n\u003cli data-section-id=\"1sxvawk\" data-start=\"14144\" data-end=\"14182\"\u003ethe possible routing of the piping;\u003c\/li\u003e\n\u003cli data-section-id=\"1o9gwn4\" data-start=\"14183\" data-end=\"14221\"\u003ethe location of the outdoor unit;\u003c\/li\u003e\n\u003cli data-section-id=\"bf6f15\" data-start=\"14222\" data-end=\"14266\"\u003ethe necessary clearances for snow;\u003c\/li\u003e\n\u003cli data-section-id=\"8c43gq\" data-start=\"14267\" data-end=\"14314\"\u003efuture access for service and maintenance;\u003c\/li\u003e\n\u003cli data-section-id=\"4zfvb2\" data-start=\"14315\" data-end=\"14365\"\u003ethe interior and exterior aesthetic finish;\u003c\/li\u003e\n\u003cli data-section-id=\"z8eb69\" data-start=\"14366\" data-end=\"14424\"\u003epotential eligibility for available subsidies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"14426\" data-end=\"14731\"\u003eWe provide a clear offer before work begins. Clients know what is included, what might incur an additional cost, and how the project will be executed. This transparency is essential, especially for a 24,000 BTU installation where technical details can influence the final cost.\u003c\/p\u003e\n\u003ch2 data-section-id=\"olwlcb\" data-start=\"14733\" data-end=\"14794\"\u003eA Serious Wall-Mounted Heat Pump for a Well-Evaluated Project\u003c\/h2\u003e\n\u003cp data-start=\"14796\" data-end=\"15134\"\u003eThe \u003cstrong data-start=\"14799\" data-end=\"14853\"\u003eKINGHOME Charmo R32 Wall-Mounted Heat Pump | 24000 BTU\u003c\/strong\u003e is particularly suitable for owners who want a robust wall-mounted solution for a large area, with good heating capacity, \u003cstrong data-start=\"15016\" data-end=\"15045\"\u003eCold Climate ENERGY STAR®\u003c\/strong\u003e certification, \u003cstrong data-start=\"15050\" data-end=\"15065\"\u003eWiFi included\u003c\/strong\u003e, \u003cstrong data-start=\"15074\" data-end=\"15082\"\u003eR-32\u003c\/strong\u003e refrigerant, and a LogisVert subsidy announced at \u003cstrong data-start=\"15122\" data-end=\"15133\"\u003e$2,304\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"15136\" data-end=\"15453\"\u003eIt is not intended for all spaces. In a small room or a highly compartmentalized dwelling, another configuration might be more appropriate. But for an open-concept area, a large ground floor, a commercial space, or a replacement of similar capacity, it deserves serious consideration in the comparison.\u003c\/p\u003e\n\u003cp data-start=\"15455\" data-end=\"15782\"\u003eFor a precise recommendation, a clear estimate, or to verify eligibility for subsidies, contact AirGreen. We serve \u003cstrong data-start=\"15607\" data-end=\"15619\"\u003eMontreal\u003c\/strong\u003e, \u003cstrong data-start=\"15621\" data-end=\"15630\"\u003eLaval\u003c\/strong\u003e, \u003cstrong data-start=\"15632\" data-end=\"15645\"\u003eLongueuil\u003c\/strong\u003e, the \u003cstrong data-start=\"15650\" data-end=\"15663\"\u003eNorth Shore\u003c\/strong\u003e, the \u003cstrong data-start=\"15668\" data-end=\"15680\"\u003eSouth Shore\u003c\/strong\u003e, and \u003cstrong data-start=\"15687\" data-end=\"15701\"\u003eMonteregie\u003c\/strong\u003e with HVAC solutions adapted to the building, budget, and desired comfort.\u003c\/p\u003e","brand":"Kinghome","offers":[{"title":"Default Title","offer_id":53811209240868,"sku":"KW24HQ19CDO","price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/1694\/6724\/files\/KINGHOMECHARMOR32THERMOPOMPEMURALE_15671ca1-1213-4e19-aa71-e77a8767ec36.png?v=1780497506","url":"https:\/\/airgreen.ca\/en\/products\/thermopompe-murale-kinghome-charmo-r32-24000-btu","provider":"AirGreen Climatisation \u0026 Chauffage \/ Air Conditioning \u0026 Heating","version":"1.0","type":"link"}