In several areas of Montreal, including Rosemont–La Petite-Patrie , optimizing comfort often involves a simple, efficient, and discreet solution: the wall-mounted heat pump . Here, we completed an installation typical of urban buildings with flat roofs: two Sharp outdoor units installed on a roof, each dedicated to its own interior space (often the case for a duplex, a triplex, or two distinct living areas).
At AirGreen , our approach is the same for every project: aim for four-season comfort , reduce consumption, and deliver a clean, durable and easy-to-maintain installation, even in the sometimes extreme conditions of Quebec winters.
A system perfectly suited to Greater Montreal: the Sharp wall-mounted heat pump (ZU1 series)
The brand supplied is Sharp — and that's exactly the one we're choosing for this installation. Selecting a Sharp wall-mounted heat pump , particularly a configuration compatible with the Sharp ZU1 , addresses three very common needs in Montreal:
-
Efficient heating during the cold seasons (and stable comfort in the mid-seasons)
-
Rapid air conditioning during heat waves
-
Room-by-room control (ideal for stacked apartments or separate living areas)
The Sharp ZU1 series is well known for its inverter technology (intelligent modulation), which translates to:
-
fewer abrupt “ON/OFF” cycles,
-
a more stable temperature
-
improved energy efficiency
-
a generally quieter operation.
Why a rooftop installation in Rosemont–La Petite-Patrie?
The photo clearly shows a flat roof with an unobstructed view of an urban environment: low-rise buildings, Montreal's high density, mature trees, and a typical residential rooftop. In this context, installing outdoor units on the roof offers several advantages:
-
Reduction of noise perceived at the windows or courtyard
-
No obstructions on the ground (no unit on a balcony, no encroachment into the walkway)
-
Improved aesthetics (especially on the facade)
-
Neighborhood protection : less direct noise pollution to adjacent properties
Naturally, a rooftop installation also demands greater precision, because stability, watertightness, service access, and vibration management become critical factors. This is precisely where AirGreen's expertise makes all the difference.
Visible installation details: a solid base, designed to last
Several elements immediately stand out in this installation — and these are very good indicators of work done “properly”.
1) Elevated units on metal supports
The two Sharp outdoor units are mounted on sturdy metal brackets . The objective is twofold:
-
allow the unit to breathe (air circulation under the device),
-
protect the roof and avoid direct contact with water, snow, or ice.
2) Insulation and routing of refrigeration pipes
Insulated pipes (black sheath) are used, which is essential for:
-
limit energy losses,
-
to avoid unwanted condensation,
-
protect the lines against temperature variations and exposure.
The path is clean and organized, which also simplifies future interventions.
3) Protection of the roof membrane
We see an installation method that avoids "raw" pressure on the membrane. On roofs, this is crucial: an installation must be designed to prevent damage to the membrane over time (vibrations + freeze/thaw cycles + expansion).
4) Clearance for maintenance
The units are positioned with sufficient clearance for:
-
access to the panels,
-
cleaning,
-
seasonal inspections,
-
and technical interventions if necessary.
This is a detail often overlooked in quick installations — but it's a detail that avoids costs and complications later on.
Why two outdoor units? A very “Montreal” setup.
In several Rosemont buildings (duplexes/triplexes), it is common to find:
-
two dwellings,
-
or two living areas with distinct needs,
-
or an interior layout that makes a single unit less optimal.
Installing two systems (rather than one oversized one) often allows for:
-
a better balance of comfort,
-
improved redundancy (if one system requests a service, the other can continue to function),
-
more precise energy management based on actual occupancy.
It is also a very consistent approach when you want to keep driving routes short, limit losses, and avoid compromises on performance.
Performance and comfort in winter: that's what we aim for at AirGreen
In Montreal, a heat pump isn't just an "improved air conditioner." It must be designed to:
-
stability in heating ,
-
humidity management,
-
the perceived comfort (not just the displayed temperature),
-
and reliability in cold weather.
Installing it on the roof also adds constraints:
-
exposure to wind
-
snow accumulation
-
ice cycles
-
pressure/air variations around the unit
That is why we pay special attention to:
-
the minimum height in relation to the roof surface,
-
the stability of the support,
-
anti-vibration,
-
and the quality of the fittings/refrigeration equipment.
Good maintenance practices (particularly for roofs)
To maintain optimal performance, we always recommend:
-
Cleaning the filters of the indoor units (every 4 to 8 weeks during periods of intensive use)
-
Clearance around outdoor units (leaves, debris, snow)
-
Seasonal inspection (before winter or before summer)
-
General check: fastening, abnormal noise, unusual ice buildup
A rooftop unit is often less exposed to ground debris, but more exposed to wind and weather variations. Simple but regular monitoring makes a huge difference to its lifespan.
The result: a clean, discreet installation, perfectly suited to Rosemont
This achievement ticks all the boxes we systematically look for:
-
aesthetic integration (grouped units, orderly installation)
-
smart urban solution (flat roof, no ground-level nuisance)
-
solid support (elevation, stability)
-
targeted comfort (two systems for two needs)
This is exactly the type of project we carry out every week in Montreal — whether in Rosemont–La Petite-Patrie , Villeray , Le Plateau-Mont-Royal , Ahuntsic , Verdun , or elsewhere in Greater Montreal.