Installation d’une Fujitsu Orion XLTH thermopompe murale à Brossard
Reading time: 6'

Installation of a Fujitsu Orion XLTH wall-mounted heat pump in Brossard

A careful exterior installation for four-season comfort on the South Shore

At AirGreen , we are working in Brossard on a single-family home with stone cladding. The owners want a versatile and reliable system to provide summer air conditioning and efficient mid-season supplemental heating , while controlling electricity consumption. Our recommendation is a Fujitsu wall-mounted heat pump – Orion XLTH series (R-32) , known for its stability in Greater Montreal's cold climate and its acoustic discretion. The priority is to obtain a durable HVAC installation , easy to access for maintenance and perfectly integrated into the facade.

Why choose Fujitsu Orion XLTH for Brossard

  • Cold climate performance : the Orion series maintains an excellent level of heating at low temperatures, a major asset on the South Shore .

  • Energy efficiency : inverter compressor and optimized expansion electronics to reduce operating costs.

  • Quiet operation : ideal for dense residential neighborhoods.

  • Reliability : protected components and intelligent defrosting logic to limit shutdowns during wet weather.

Site study and installation of the outdoor unit

The environment features a stone facade with a horizontal sill and a narrow green space at the foot of the wall. We are choosing to install it on wall brackets in order to:

  • clear the ground (snow, debris, grass cuttings) and protect the device from splashes;

  • facilitate the drainage of condensates in air conditioning mode by a continuous gravity slope;

  • reduce vibrations by adding anti-vibration pads .

The unit is positioned at a height that allows airflow without recirculation or obstruction by vegetation. Clearances around the air intake and outlet are maintained to maintain nominal performance and noise levels.

Execution details: aesthetics, waterproofing and accessibility

Refrigerated and electrical route

  • Unique, precisely angled drilling with abrasion-resistant sleeve and UV-resistant exterior seal.

  • Beige capping matching the moldings to conceal the connections and visually integrate with the stone facing.

  • Optimized line length (approx. 4–6 m), wide radius bends and silver brazing for long-lasting hold.

  • Communication and power cables grouped together and secured with UV clamps to prevent wind damage.

Fixings and protection

  • Hot-dip galvanized brackets , mechanically anchored in the mineral support; tensile test carried out before loading.

  • Propeller protection grid to secure the passage area and limit the intrusion of debris.

  • Installation of anti-vibration mounts under the chassis to reduce structural transmission towards the interior.

Condensate management

  • Gravity drain directed away from walking areas, with accessible inspection point.

  • Provision for a condensate pump if the interior layout requires a later discharge.

Meticulous commissioning by AirGreen

  • Nitrogen test and leak detection with electronic detector.

  • Deep vacuum draw until stabilization ≤ 500 microns; rise test to confirm absence of residual moisture.

  • Checking intensities, blowing temperatures, superheating and subcooling .

  • Setting of modes, instructions and ventilation; explanation of functions to the customer.

Result: immediate comfort, clean facade and simplified maintenance

The façade remains visually clean thanks to the capping aligned with the molding. The raised unit prevents snow buildup and leaves a clear path for grounds maintenance. The noise level remains contained, even during prolonged operation, preserving the neighborhood's tranquility.

Concrete benefits for the home

  • Uniform air conditioning of main rooms with precise humidity control.

  • Efficient heating during thaws and in the off-season, reducing the need for electric baseboard heaters.

  • Energy savings thanks to continuous modulation of the compressor.

  • Improved air quality through indoor filtration and regular circulation.

Recommended HVAC Best Practices and Maintenance

To maintain yields and extend lifespan:

  1. Clean the indoor unit filters every 4 to 6 weeks during periods of heavy use.

  2. Clear the area around the condenser (20–30 cm minimum on each side) and check for blocking vegetation.

  3. Gently rinse the outdoor heat exchanger in spring and late summer; never bend the fins.

  4. Schedule annual HVAC maintenance : check connections, pressure/temperature measurements, test sensors and drainage.

  5. In winter, clear away any drifted snow that may restrict air intake.

Tips for optimizing savings

  • Maintain a stable setpoint rather than frequently alternating modes.

  • In air conditioning, aim for 23–24°C for lasting comfort.

  • Leave interior doors open to promote air circulation.

  • Use auto/low speeds in the evening to limit draft and outside noise.

Grants and administrative support

The installed heat pump belongs to a high-efficiency generation and meets the criteria generally eligible for assistance in Quebec depending on the configuration of the housing. We help our clients gather the proof of installation, technical data sheets and photos required for applications applicable to Montreal , Laval , Longueuil , the North Shore and the South Shore .

Security, compliance and guarantees

  • Work carried out by certified technicians according to RBQ requirements and current electrical standards.

  • Sealing materials and fixings approved for outdoor use, resistant to freeze/thaw cycles.

  • Manufacturer's equipment warranty and AirGreen labor warranty depending on the plan chosen.

  • Complete traceability: serial numbers, installation photos, commissioning records.

Deadlines and organization of the worksite

  • Facade inspection and installation: morning.

  • Drilling, capping , refrigeration and electrical connections: all in the same day.

  • Commissioning, testing, customer training and site cleaning: end of day.

  • Responsible disposal and recycling of replaced devices and materials where applicable.

AirGreen, your HVAC partner on the South Shore and throughout Greater Montreal

We support homeowners in Brossard , Longueuil , Montreal , Laval , the North Shore and the South Shore with custom projects: wall-mounted heat pumps , multi-zone systems and central systems. Our value: precise sizing, meticulous installation and responsive after-sales service , with clear advice to ensure long-lasting performance.


Useful keywords: heat pump , wall-mounted heat pump , Fujitsu Orion XLTH , HVAC installation , HVAC maintenance , Brossard , South Shore , Montreal , Laval , Longueuil , North Shore , wall brackets , capping , condensate drainage , stone facade .

Leave a comment