Carefully integrated into a condo with anthracite walls, designed for quiet comfort and aesthetics.
Project context: compact space, high demands
In Griffintown, condos often combine rational volumes , meticulous finishes and co-ownership constraints . Our client wanted a four-season heating and cooling solution that respected the interior aesthetics—deep gray painted walls, suspended lighting—and the building's rules regarding condenser positioning, noise level and condensate drainage. We recommended a Gree Livo R32 wall-mounted heat pump (recent range), known for its cooling performance in the summer and its efficient heating at low temperatures .
Feasibility study and choice of equipment
Why a wall-mounted heat pump in this context?
-
Flexible installation in a high corner of a room, ideal for promoting stratification and air diffusion.
-
Low indoor noise level : perfect for an office or bedroom used daily.
-
Higher energy efficiency in wall-mounted air conditioning mode in summer, and advantageous COP in heating mode.
-
R-32 refrigerant , with a lower GWP than R-410A, compatible with current Quebec market requirements .
Why the Gree Livo R32 range
-
Outstanding seasonal efficiency (SEER/SEER2 and HSPF/HSPF2 competitive for the category).
-
Smart defrosting limits unnecessary cycles in cold weather.
-
Reliable electronics and inverter components ensure fine modulation, therefore less jolts, more comfort and lower operating costs .
-
Discreet design : white hood with simple lines, blending well with the anthracite walls of the project.
Installation process: clean, fast, compliant
Interior layout
The wall head is placed at the highest point of the wall , under the ceiling, centered in relation to the volume to be treated. This positioning:
-
Optimizes the return of hot air in winter and the mixing effect in summer;
-
Avoids conflicts with pendant lighting and decorative frame installed on the neighboring wall;
-
Reduces the sound signature perceived at ear height.
The main drilling (65 mm) is made with a gravity slope towards the outside for the evacuation of condensates . The insulation of the connections is continuous up to the wall, sheathed with a vapor barrier tape to prevent surface condensation on cold walls.
Refrigerant connections and power supply
-
Estimated total length of lines: 8 to 10 meters , adapted to the size of the condo and the route to the balcony.
-
Silver-brazed deoxidized copper , deep vacuum <500 microns, vacuum maintained and nitrogen leak tested .
-
Communication and power cabling in the same external trunking, with separation at entry points for electrical safety.
-
Dedicated circuit breaker according to the outdoor unit nameplate; anti-UV cable for the outdoor portion.
Finishing and architectural integration
-
Exterior capping in anthracite (matching the dark facade) from the drilling to the condenser.
-
Foam sealing + mastic at the drilling for air/water sealing and vapor barrier .
-
Condensate management by natural slope to the outdoor unit tray, without pump (less noise, less maintenance).
Condenser on balcony: stability and silence
-
Installation on anti-vibration slab with shock-absorbing pads to limit the transmission of vibrations to the structure.
-
Regulatory distance to guardrails and neighboring walls for optimal air flow and future maintenance.
-
Accessible service line for pressure gauges and maintenance; valves protected by cover.
Quality of execution: our AirGreen method
Controls and tests
-
Brazing under nitrogen to avoid internal oxidation.
-
Pressure test (dry nitrogen) then vacuum controlled with a micron meter.
-
Soft start : check for superheat and subcooling ; control of currents .
-
Comfort measurements : air speed at 1 m, blowing temperature , noise level at 1 m and 3 m.
Cleanliness and safety of the construction site
-
Protection of painted walls (anthracite) and lighting during drilling.
-
Dust management and site restoration.
-
Documentation provided to the customer: maintenance guide, remote control programming and seasonal use advice.
Result: precise comfort, preserved aesthetics
Immediate benefits
-
Rapid temperature reduction in wall-mounted air conditioner mode; uniform sensation thanks to vertical/horizontal oscillation.
-
Stable heating in mid-season and mild winters, reducing the load on baseboards or electrical backups.
-
Perceptible silence : Inverter modulation keeps the unit at low speed once the setpoint is reached.
Sustainable benefits
-
Energy savings linked to modulation and R-32 (excellent volumetric efficiency).
-
Simplified maintenance : easy access to the filter, exchanger and connections.
-
Real estate added value : modern, clean HVAC solution, compliant with co-ownership rules .
Good practices and pitfalls to avoid (feedback)
-
Always check the building's rules regarding noise levels and condensate drainage.
-
Avoid condensate rising by pump when gravity slope is possible: it is more reliable and quieter .
-
Take care of aesthetics : choose capping to match the facade, route as short and straight as possible.
-
Anticipate maintenance : clearance around the condenser and sufficient height to evacuate snow if the balcony is open to the wind.
-
Entrust commissioning to a certified team: vacuum drawing and leak tests determine the compressor's lifespan .
AirGreen Recommended HVAC Maintenance
-
Quarterly cleaning of internal filters (gentle vacuuming + washing if reusable).
-
Annual inspection : coils, condensate tray, ventilation pallet , tightening of connections, checking of insulation on the suction line.
-
Snow removal from the balcony/condenser in winter; maintaining clearances .
-
Pre-cooling season disinfection (prevent odors and biofilms).
-
Remote control message monitoring and eco setpoint settings: 24–25°C in summer, 20–21°C in winter for comfort/savings balance .
Frequently asked questions we address in the field
“Is this eligible for financial assistance?”
Depending on the specific efficiency of the unit and current provincial programs , certain wall-mounted heat pump configurations may be eligible . We evaluate each application taking into account the housing , power (BTU), low-temperature performance and administrative requirements .
“What capacity (BTU) should I choose?”
We size based on the surface area , the envelope (windows, insulation), the room's purpose and the usage profile . In Griffintown condos, 9,000 to 12,000 BTU is often appropriate for an open living room ; beyond that, we will favor multi-zone or a second diffusion point .
Why AirGreen in Montreal, Laval, Longueuil, North Shore, South Shore
Our team, specialized in HVAC installation, understands the specific features of plexes , condos , and houses in Greater Montreal. We work with the same high standards on:
-
Montreal (Southwest, Plateau, Rosemont, Verdun, etc.);
-
Laval (Chomedey, Sainte-Dorothée, Vimont, etc.);
-
Longueuil and the South Shore (Brossard, Saint-Lambert, Boucherville, etc.);
-
North Shore (Terrebonne, Boisbriand, Sainte-Thérèse, etc.).
The goal: to deliver an impeccable, durable, quiet HVAC installation that is aesthetically integrated into your interior—like here, with this Gree Livo R32 wall-mounted heat pump perfectly aligned with the ceiling and decorative elements.
What's next?
We offer maintenance contracts and responsive after-sales service . Whether you're looking for a heat pump for an urban condo, a discreet wall-mounted air conditioner for a bedroom, or a multi-zone unit for an open-plan space, we tailor the power , wiring, and finish to your architectural reality and budget.
AirGreen — your HVAC partner in Montreal, Laval, Longueuil, North Shore, South Shore for clean, efficient and sustainable installations.