Installation of a Midea (Midea28 R-454B range) wall-mounted heat pump in Rosemont–La Petite-Patrie

Quiet, precise comfort for a Montreal master bedroom

At AirGreen , we have just installed a Midea wall-mounted heat pump — Midea28 range with R-454B refrigerant — in a master bedroom of a plex in Rosemont–La Petite-Patrie . The goal: to provide precise cooling in the summer , efficient supplemental heating in the winter , and minimal noise levels for restful sleep. The chosen location, airflow management, and interior finish ensure a discreet, aesthetic, and durable result.

The context: a rest room where silence and regularity prevail

The room is bright, with a sober decor (light walls, fabric furniture), with a headboard against the long wall and a side opening with a drawn curtain. This configuration requires:

• indirect blowing to avoid drafts on the occupants;

• a high installation promoting mixing in air conditioning mode and controlled stratification in heating mode;

• a visual integration perfectly aligned with the decor.

We therefore place the interior head above the circulation area , away from the head of the bed, which allows the shutters to be directed towards the central volume of the room without “hitting” the bed.

Why the Midea28 (R-454B) range?

The Midea28 range is ideal for bedrooms and rest rooms thanks to its responsive inverter , its very low noise level and the use of R-454B , a new generation refrigerant with a GWP lower than R-410A. The concrete benefits for a Montreal home:

• 4-season comfort : fine modulation of power, stable temperature without jolts;

• High energy efficiency (SEER/SCOP) which translates into savings over the year;

• Extreme cold : maintains capacity down to negative temperatures typical of the local climate, ideal for additional heating in the room;

• Discreet display on the right front, readable at a glance without disturbing the night-time aesthetic;

• Staged filtration that improves the air quality of a room where you spend long hours.

Sizing: Get it right for sleep and bills

BTU sizing is not just about surface area. We consider:

• thermal losses (insulation, shared walls, upper floor);

• solar gains (window orientation, occultation, glazing tint);

• use (doors open/closed at night, desired set temperature).

For a room of this type, the 9,000–12,000 BTU range is generally optimal. We then adjust according to the envelope and orientation. Proper sizing prevents excessive cycling , limits noise, and extends compressor life .

Interior installation: precision to the millimeter

• Installation height : high to free up space, prevent obstruction by furniture and improve blowing range .

• Clearances : respected around the unit for vertical/horizontal sweeping of the shutters and maintenance access.

• Louver orientation : slight inclination towards the center of the room for indirect blowing ; in night mode, we recommend the “Sleep” function and a horizontal louver to stabilize the air layer.

• Display : discreet on the front, adjustable brightness so as not to disturb sleep.

Refrigeration and evacuation route: short, clean, reliable

The inner head is placed near a wall facing outside . Positive consequences:

• Very short refrigeration path (almost direct rear passage) → less pressure loss , better actual efficiency;

• Minimal white capping , aligned with the wall , for almost invisible visual integration ;

• Condensate drainage by gravity , without pump: simplicity , silence , reliability .

We systematically carry out: torque brazing , controlled flaring , nitrogen testing , then deep vacuum (stabilized) in order to eliminate humidity and air and ensure a flawless circuit .

Outdoor unit: performance and peace of mind

The condenser is installed with:

• wall brackets and silent blocks to cut off vibration transmission;

• ground clearance for snow and efficient defrosting ;

• nearby service switch , compliant with electrical requirements;

• protected routing of refrigerant connections to the interior.

This set guarantees easy maintenance , rapid defrosting in winter and increased longevity .

Instrumented commissioning: reassuring figures

Our commissioning steps include:

1. Nitrogen pressurization to validate the seal.

2. High vacuum and micron level stabilization.

3. Blowing/suction temperature readings , ΔT in cold, absorbed intensity , control of probes and defrosting .

4. Fine adjustment of the shutters to avoid ceiling recirculation and ensure homogeneous mixing .

The measurements confirm a capacity at the meeting , a stable setpoint and a noise level adapted to nighttime rest.

Perceived comfort: what the customer feels on a daily basis

• Rapid drop in temperature on summer evenings, without drafts on the bed.

• Gentle heating during cool mornings, ideal for Montreal between seasons.

• Silence : the low speed mode and the inverter algorithm ensure an almost imperceptible presence.

• Improved air quality thanks to clean filters and regular sweeping.

HVAC Maintenance: The Routine That Extends Performance

To keep the heat pump operating at its best:

• Filters : rinse every 4–8 weeks (more often if animals or dust).

• Exterior clearance : Check for leaves, snow or objects within 45–60 cm.

• AirGreen annual maintenance : deep cleaning of the evaporator, tightening torque check, ΔT/pressure measurement, safety test and evacuation inspection.

Regular maintenance protects the compressor, reduces consumption and keeps noise levels low.

Grants and Eligibility

High-efficiency wall-mounted heat pumps using new-generation refrigerants such as R-454B are often eligible for financial assistance in Quebec (depending on current criteria and selected capacity). Our team supports homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore for:

• confirm model and configuration eligibility ;

• prepare documents (detailed invoices, serial numbers, photos);

• submit applications within the required timeframe.

Common mistakes to avoid (AirGreen feedback)

• Undersize a room well exposed to the late afternoon sun: the compressor works too hard, the lifespan decreases.

• Remote wall outlet requiring a long route : pressure losses and degraded efficiency .

• Direct blowing onto the bed : discomfort, drying out, poor perception of the system.

• Forgetting maintenance : clogged filters = noise, overconsumption, odors.

Why entrust your HVAC installation to AirGreen?

• Certified team and standardized procedures (sealing, vacuum, measurements).

• Neat interior finish : discreet capping , clean passage, hidden screws.

• After-sales support and HVAC maintenance program to maintain performance over time.

• Multi-brand expertise: Midea , Gree , Fujitsu , Sharp , Gree MultiZone , central air systems and accessories .

---

Project Quick Facts

• Type : wall-mounted heat pump (mini-split, master bedroom)

• Brand : Midea

• Range : Midea28 (R-454B)

• Installation : high installation, indirect blowing towards the center of the room

• Route : very short , minimal white capping, gravity evacuation

• Condenser : on brackets with silent blocks, snow clearance

• Objective : silence , setpoint stability , optimized annual yield

Conclusion

This Midea installation (Midea28 R-454B) in Rosemont–La Petite-Patrie sums up our approach: right sizing , clean execution and measurable comfort in a room where sleep is king. For similar projects in Montreal, Laval, Longueuil, North Shore and South Shore , our AirGreen team delivers efficient, discreet and durable systems, perfectly adapted to the climate and residential spaces of Greater Montreal.