An outdoor installation adapted to the constraints of a Huntingdon residence with the Elios EMC heat pump
In Huntingdon, in southwestern Quebec, homeowners are increasingly looking for efficient heating and cooling solutions capable of operating during Quebec winters while reducing annual energy consumption. With this in mind, our team at AirGreen installed an Elios EMC wall-mounted heat pump designed for cold climates.
This installation featured an interesting configuration: two outdoor units were installed on stacked metal wall brackets, attached directly to the exterior siding of the residence. This approach freed up ground space, improved airflow around the units, and protected the equipment from snow and ice buildup.
The Elios EMC series is specially designed for regions where winter temperatures can drop very low. According to the manufacturer's specifications, this line provides heating operation down to -30 °C, with Heat+ technology, allowing it to maintain a high rated capacity even when outdoor conditions become challenging.
For a residence located in Huntingdon, this type of equipment is an attractive alternative to traditional heating systems, as it provides two functions with a single installation:
- Cooling during the summer;
- Efficient heating during the cold seasons;
- Reduced use of other heating sources;
- Improved room-by-room comfort through independent control.
Technical specifications of the installed Elios EMC wall-mounted heat pump
The Elios EMC line uses Inverter Drive technology, which continuously adjusts the compressor speed according to the home's actual needs. Unlike traditional units that frequently start and stop their compressors, an inverter heat pump modulates its output to maintain a more stable temperature and improve energy efficiency.
This technology offers several advantages:
Reliable heating even in extreme cold
Huntingdon winters can be harsh. A wall-mounted heat pump designed for Quebec must therefore be capable of providing consistent heat when temperatures drop.
The EMC series offers, among other features:
- Heating operation down to -30 °C;
- Heat+ technology to increase performance at low temperatures;
- Maintaining 100% of rated capacity down to -15 °C;
- Heated condensate pan to limit ice accumulation on the outdoor unit.
These features are particularly important in regions such as Huntingdon, Montreal, Laval, Longueuil, the North Shore, and the South Shore, where temperature variations can be significant between seasons.
Energy performance suited to Quebec
The Elios EMC heat pump is certified ENERGY STAR® V6.1, including ENERGY STAR® Cold Climate certification for models in the series.
Depending on the model selected, performance can reach:
- Up to 26.0 TRÉS2 (SEER2) in cooling;
- Up to 10.1 CPSC2-5 in heating;
- Refrigerant R454B, a next-generation technology with low global warming potential.
This data allows homeowners to better control their energy costs while enjoying superior comfort.
A wall-mounted installation designed for durability and performance
During this installation in Huntingdon, one of the most visible elements is the method used to secure the outdoor units.
Instead of placing the heat pumps on traditional ground-level bases, we used robust wall-mounted brackets to position the units higher up.
This configuration offers several advantages:
Protection against snow and ice
In Quebec, an outdoor unit installed too close to the ground can be affected by:
- Heavy snow accumulation;
- Ice falling from the roof;
- Meltwater that refreezes around the unit.
A wall-mounted installation reduces these risks and facilitates the drainage of water from defrosting.
Improved airflow
A heat pump must be able to draw in and expel a large amount of air to operate properly.
Clearance around the outdoor unit is essential to prevent:
- Reduced performance;
- Compressor overload;
- More frequent defrost cycles.
Our HVAC installers pay particular attention to the positioning of each unit to comply with the manufacturer’s technical recommendations.
Vibration reduction
The wall brackets used for this installation include elements designed to limit the transmission of vibrations to the building structure.
Poor mechanical installation can lead to:
- Noticeable noise in adjacent rooms;
- Vibrations in the walls;
- Premature wear of certain components.
At AirGreen, we consider mechanical installation to be just as important as choosing the equipment itself.
An HVAC installation completed with particular attention to detail
This installation image also shows a clean arrangement of the refrigerant lines and electrical cables. The lines have been grouped and protected to ensure an attractive finish while protecting the components from the elements.
A professional installation includes several essential steps:
Location assessment
Before installation, we analyze:
- The ideal location for the indoor unit;
- The distance between the units;
- The routing of the lines;
- The building’s architectural constraints;
- Actual heating and cooling needs.
Outdoor unit installation
The Elios EMC outdoor unit must be installed with:
- A stable base or support;
- A perfectly level position;
- Sufficient clearances;
- Adequate protection against outdoor conditions.
Commissioning and checks
After installation, our team performs the necessary checks:
- Refrigerant circuit leak-tightness check;
- Operating parameter validation;
- Heating and cooling verification;
- Explanation of the main features to the homeowner.
Air quality and indoor comfort with Elios EMC
Beyond heating and cooling, a modern wall-mounted heat pump also helps improve everyday comfort.
The Elios EMC series includes several features designed for indoor comfort:
- Variable-speed indoor fan;
- Two filters to capture dust, pollen, and particles;
- Carbon filter to absorb certain odors;
- Active indoor coil-cleaning function;
- Quiet mode to reduce noise.
For bedrooms, offices, or living spaces, quiet operation is an important advantage. The 12,000 BTU model, for example, can achieve a very low indoor sound level depending on the setting used.
Common mistakes to avoid when installing a wall-mounted heat pump in Quebec
Even an excellent unit can lose some of its efficiency if it is not installed properly.
Here are some common mistakes we observe in the residential HVAC field:
Choosing equipment based solely on price
A less expensive heat pump that is less suited to Quebec’s climate may cost more in the long term.
The following must be analyzed:
- Low-temperature performance;
- Cold-climate certification;
- Parts availability;
- Installation quality.
Installing the outdoor unit in the wrong location
An outdoor unit hidden in an enclosed corner or placed too close to an obstacle may lose efficiency.
Neglecting HVAC maintenance
Even a high-performance heat pump requires regular maintenance:
- Filter cleaning;
- Coil inspection;
- Drainage check;
- General operation check.
Periodic HVAC maintenance helps maintain performance and extend the equipment’s service life.
AirGreen: your heat pump installation specialist in Huntingdon and Greater Montreal
This Elios EMC wall-mounted heat pump installation in Huntingdon demonstrates the importance of a comprehensive approach: choosing equipment suited to the climate, carefully planning its location, and carrying out a durable installation.
At AirGreen, we install HVAC solutions tailored to the needs of homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore, with particular attention to winter performance, energy efficiency, and installation quality.
A properly selected and installed wall-mounted heat pump can provide several years of comfort while helping to better control heating and cooling costs.