Maintenance and Thorough Cleaning of a Wall-Mounted Heat Pump in Beaconsfield, Montreal
Discover how AirGreen revitalized a heavily soiled heat pump in Beaconsfield. With professional cleaning, a Freon check, and detailed inspection, we restored peak performance and fresh air quality.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Rejuvenating Comfort: Comprehensive Cleaning and Maintenance of a Wall-Mounted Heat Pump in Beaconsfield, Montreal
Ensuring Reliable Performance with Professional Maintenance
At AirGreen, we understand that regular maintenance is crucial for ensuring the longevity and efficiency of any HVAC system. Recently, we had the pleasure of conducting a thorough cleaning and maintenance service on a wall-mounted heat pump in Beaconsfield, Montreal. This wasn’t your typical light dusting job; the machine was heavily soiled, and the customer was concerned about its performance. Our team tackled the task with precision and expertise, transforming the unit into a spotless, high-performing system once again.
Understanding the Challenge: A Heavily Soiled Heat Pump
After years of operation, heat pumps can accumulate significant dirt, dust, and even mold on their internal components. This particular unit was no exception. The filters and coils were layered with dust, impacting the air quality and energy efficiency of the machine. Such levels of dirt don’t just reduce a unit’s cooling or heating power—they can cause strain on the compressor, leading to higher energy bills and potential mechanical failures down the line. Our mission was clear: restore the system to its optimal state, ensuring the customer could enjoy clean, efficient air once more.
Our Process: Comprehensive Cleaning and Inspection
Step 1: Deep Cleaning of the Filters and Coils
We started by carefully removing the filters and coil covers to access the critical areas of the heat pump. Using specialized HVAC cleaning tools and solutions, we meticulously cleaned the filters and evaporator coils. Dust and grime can block airflow and reduce heat exchange efficiency, so this step is essential for restoring the unit’s functionality. After the cleaning, the filters looked brand new, ready to provide clean air.
Step 2: Checking the Freon Levels
Once the cleaning was complete, we moved on to checking the Freon (refrigerant) levels. Proper refrigerant levels are crucial for efficient operation, as low levels can lead to reduced cooling capacity and higher energy consumption. In this case, we found that the Freon levels were within an acceptable range, but our inspection ensured that the system was operating as it should.
Step 3: Overall Inspection and Testing
After the cleaning and Freon check, we conducted a full inspection of the fan, compressor, and electrical connections. This inspection is crucial for identifying any potential issues before they become serious problems. After confirming that all components were in good shape, we powered up the system to test its functionality. The results were fantastic: the heat pump was running quietly and smoothly, just like it did when it was new.
Customer Satisfaction: A Clean, Fresh, and Efficient Heat Pump
Our customer was thrilled with the results. They expressed gratitude for our attention to detail and professional approach. By cleaning and verifying every aspect of the heat pump, we were able to significantly improve the air quality and efficiency of their home’s HVAC system. Regular maintenance like this doesn’t just benefit the machine—it enhances the overall comfort and well-being of the people using it.
Why Regular Maintenance Matters
It’s easy to overlook the importance of routine HVAC maintenance, especially when a system seems to be working fine. However, dirt buildup, blocked filters, and undetected issues can compromise the performance of your heat pump over time. Here’s why regular maintenance is essential:
- Enhanced Energy Efficiency: A clean, well-maintained system runs more efficiently, saving you money on energy bills.
- Improved Air Quality: Dust and allergens trapped in your unit can circulate through your home, impacting air quality.
- Extended Lifespan: Regular maintenance reduces wear and tear on components, prolonging the life of your HVAC system.
- Preventative Care: Identifying potential issues early can prevent costly repairs or replacements down the road.
Trust AirGreen for Your HVAC Maintenance Needs
At AirGreen, we specialize in providing professional maintenance services for HVAC systems across Montreal, Laval, Longueuil, and the North and South Shores. Whether it’s a routine cleaning, a full system inspection, or a complex repair, our team has the experience and expertise to get the job done right. By choosing us, you’re investing in reliable performance and peace of mind for years to come.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
The type of unit, its age and what you have noticed: noise, smell, water, lower output.
Filters, coils or core, drain, fans, connections and clearances.
Dirty parts are cleaned following the manufacturer's recommendations.
Operation, water drainage, noise and airflow.
What was done, what to watch and when to come back.
- The appointmentThe type of unit, its age and what you have noticed: noise, smell, water, lower output.
- InspectionFilters, coils or core, drain, fans, connections and clearances.
- CleaningDirty parts are cleaned following the manufacturer's recommendations.
- ChecksOperation, water drainage, noise and airflow.
- The reportWhat was done, what to watch and when to come back.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
How often should maintenance be done?
Does maintenance improve performance?
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).