Installation of a Gree Vita Mini Split in Pointe-Claire, Montreal
Discover AirGreen’s latest success with a Gree Vita Mini Split installation in Pointe-Claire! Silent, efficient, and professionally installed for your comfort and peace of mind.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
A Seamless Experience with AirGreen
Introduction to Excellence
At AirGreen, we recently completed an exemplary installation of a Gree Vita Mini Split (wall-mounted heat pump) in the serene neighborhood of Pointe-Claire, Montreal. This installation not only stands as a testament to our unmatched expertise but also highlights the superior performance and silent operation of the Gree Vita model.
A Glimpse into the Installation Process
Our team executed this installation with precision and efficiency, ensuring a hassle-free experience for our valued customer. The process was straightforward, with the compressor neatly fitted at the back of the house and the head unit strategically placed on the opposite wall. This positioning was crucial to facilitate optimal functionality and aesthetics.
Neighborly Considerations
Understanding the importance of harmonious neighbor relations, our customer took the proactive step of discussing the impending installation with their neighbors. This thoughtful gesture aimed to preemptively address any concerns or inconveniences that might arise due to the new addition. Fortunately, the Gree Vita’s whisper-quiet operation ensures that peace in the neighborhood is undisturbed, making it a considerate choice for residential installations.
Key Features of the Gree Vita Mini Split
- Cooling Capacity: A robust 18,000 BTU for a comfortable and cool living space.
- Heating Efficiency: Reliable performance even at -20°C, providing warmth in the chilly Montreal winters.
- Silent Operation: With an exterior sound pressure level of 57.0 dB(A) and an interior level ranging between 32 and 50 dB(A), the Gree Vita operates quietly, making it ideal for home environments.
- Energy Efficiency: Boasting a 17.5 SEER efficiency rating, this model is designed for sustainable and energy-efficient use.
- Warranty: A reassuring 10-10-10 warranty on compressor, parts, and labor respectively.
- Wi-Fi Connectivity: Integrated Wi-Fi feature for convenient control and monitoring.
Dimensions & Technical Specifications
- Interior Unit Dimensions: 37.13 x 9.69 x 13.09 inches
- Exterior Unit Dimensions: 31.56 x 13.78 x 21.74 inches
- Voltage Requirement: 220V
- Refrigerant: Uses R-410A Freon for efficient cooling.
A Customer-Centric Approach
Our customer was immensely satisfied with the clean and professional installation process, which was completed in just half a day! At AirGreen, we prioritize customer satisfaction and endeavor to provide services that not only meet but exceed expectations.
Why Choose AirGreen for Your HVAC Needs?
With a rich history of serving the regions of Montreal, Laval, Longueuil, North Shore, and South Shore, AirGreen is your go-to solution for top-tier HVAC services. Our team of skilled technicians is committed to delivering quality installations, ensuring that your HVAC systems function flawlessly and efficiently.
Conclusion: A Success Story in Pointe-Claire
This installation in Pointe-Claire is a shining example of AirGreen’s dedication to excellence and customer satisfaction. With the Gree Vita Mini Split now efficiently cooling and heating the residence, our customer can enjoy a comfortable and pleasant living environment, with the assurance of having a reliable and silent HVAC system in place.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).