Installation of a Gree Flexx Electric Furnace in Repentigny
Transform your home into a warm haven this winter with the Gree Flexx Electric Furnace. Choose comfort and efficiency with AirGreen!
Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.
The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.
A shut-off switch near the outdoor unit isolates it safely for service.
Sitting on the indoor module, it moves heat between the house air and the refrigerant.
Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.
Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.
It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.
It runs the heat pump and the backup heat. It must be compatible with the installed system.
A Glimpse into the Future of Home Heating with Gree Flexx
When the chilly winds of Repentigny threaten to pierce through the warmth of your home, having a reliable and efficient heating system isn't just a luxury; it's a necessity. This winter, a local family chose AirGreen, your trusted HVAC experts in Montréal, Laval, Longueuil, and beyond, for a significant upgrade to their home's comfort system. They selected the Gree Flexx Electric Furnace, a decision that not only enhances their living comfort but also aligns with sustainable energy use.
Cutting-Edge Technology and Design
The Gree Flexx Electric Furnace stands out in the HVAC market for its remarkable energy efficiency and robust performance. Here’s what makes the Flexx model not just any furnace, but a true centerpiece of home heating:
- Model Specifications: The Gree Flexx model boasts a 3-ton capacity, tailored for medium to large homes. With dimensions of 21.25 x 48.25 x 21.25 inches, it fits seamlessly into existing HVAC systems.
- Extreme Weather Capability: Designed to deliver heating even at temperatures as low as -30°C, the Flexx ensures your home remains a warm haven no matter how fierce the weather outside gets.
- Sound Optimization: At an exterior sound pressure level of just 45 dB(A), it operates more quietly than a typical conversation, ensuring your home peace isn't disrupted.
- Advanced Features: Features like the illuminated wireless remote control, eco mode, and automatic changeover provide convenience and adaptability to all weather conditions.
Installation Story: Beyond the Technicalities
The installation in Repentigny wasn't just about technical specifications; it was a narrative of transforming a house into a home. The family, having recently faced the harshness of an unusually cold winter, decided it was time to upgrade their aging heating system. They sought a solution that would not only provide warmth but also contribute to their goal of reducing their carbon footprint.
Choosing the Gree Flexx was a decision influenced by the model's eligibility for the $1,920 LogisVert Program by Hydro-Québec, which supports energy-efficient home improvements. This grant, coupled with potential provincial and federal grants totaling up to $5,000, made the Flexx an economically attractive option.
Why Gree Flexx?
Why did this family opt for the Gree Flexx, and why might it be the right choice for your home? Here are some compelling reasons:
- Energy Efficiency: With up to 20 SEER and 10.5 HSPF, the Flexx operates at a high efficiency, which means lower energy bills and less environmental impact.
- Reliability: The Gree brand is synonymous with quality and reliability, and the Flexx model comes with a reassuring 12-year warranty.
- Versatility: Adjustable capacity from 2 to 3 tons allows the system to be tailored to the specific needs of your home, ensuring efficient operation without overburdening your electrical system.
A Testament to Expertise
The installation process itself was a testament to AirGreen's expertise. Navigating the intricacies of integrating the Flexx into the home’s existing infrastructure required not only technical skill but also a deep understanding of the family’s needs. Our team ensured minimal disruption to their daily life, completing the installation efficiently and on schedule.
Conclusion: A Warm Home is a Happy Home
As the cold season approaches, the family in Repentigny can now look forward to a warmer home environment. More than just a heating system, their new Gree Flexx Electric Furnace is a commitment to comfort, efficiency, and environmental responsibility.
Choose AirGreen for Your Next HVAC Project
Are you ready to transform your home heating experience? Contact AirGreen today, and let us guide you through the process of selecting and installing the perfect HVAC system for your needs. Remember, with AirGreen, warmth and efficiency go hand in hand.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
The equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
Access protected, old unit disconnected and removed when it is being replaced.
Electric furnace or air handler, with its coil, connected to the supply and return ducts.
On a level base, raised above the snow, with free space all around.
Insulated, they enter through a sealed opening and run to the indoor coil.
Dedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
Leak test, vacuum, start-up, airflow check and a test of both modes.
Filter, thermostat, backup heat in extreme cold: what to know before winter.
- The on-site estimateWe look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
- The quoteThe equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
- Getting readyAccess protected, old unit disconnected and removed when it is being replaced.
- The indoor moduleElectric furnace or air handler, with its coil, connected to the supply and return ducts.
- The outdoor unitOn a level base, raised above the snow, with free space all around.
- The refrigerant linesInsulated, they enter through a sealed opening and run to the indoor coil.
- Electrical and thermostatDedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
- Tests and start-upLeak test, vacuum, start-up, airflow check and a test of both modes.
- The walkthroughFilter, thermostat, backup heat in extreme cold: what to know before winter.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Check the indoor module's filter.
- Clear winter debris from the outdoor unit.
- Test cooling before the heat arrives.
- Check the filter more often in peak season.
- Keep registers and returns clear.
- Watch condensate drainage near the coil.
- Change or clean the filter.
- Test heating and backup heat before the cold.
- Book periodic maintenance.
- Clear snow around the outdoor unit.
- Store nothing in front of the indoor module.
- Note any unusual noise or smell and call us.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. A central heat pump uses the house's ducts.
It connects to the existing ducts to heat and cool everywhere.
2. In extreme cold, electric backup heat can take over.
The indoor module (furnace or air handler) works with the heat pump and takes over in extreme cold.
3. The filter only gets changed when the unit breaks down.
A dirty filter cuts airflow. It gets checked regularly.
4. You can reuse the old unit's size without checking.
The house may have changed: insulation, windows, added rooms. Capacity is confirmed on site.
0 / 4 right answers
What people ask us about this kind of work
Can I keep my current ducts?
What happens in extreme cold?
Furnace, air handler, ducted: what is the difference?
Are there grants?
Do I need a permit?
How much can I save?
How is the LogisVert assistance calculated?
Will my current thermostat work?
Central or wall units: which one?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).