Installation of a Haxxair T2D DoubleZone Wall-Mounted Heat Pump in Villeray, Montreal
Dive into AirGreen's latest project - the installation of a Haxxair T2D DoubleZone Wall-Mounted Heat Pump in Villeray, Montreal. Experience the blend of efficiency, comfort, and customer satisfaction.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A New Level of Comfort and Efficiency
We at AirGreen are excited to share the details of our latest project – the installation of a Haxxair T2D DoubleZone Wall-Mounted Heat Pump in the vibrant Villeray neighborhood of Montreal. This project illustrates our commitment to providing top-tier HVAC services that not only meet but exceed our clients' expectations.
The Haxxair T2D: A Concentrate of Efficiency
The Haxxair T2D is a cutting-edge heat pump offering a powerful cooling solution with a capacity of 24,000 BTU and two zones. It is an Energy Star® certified model, ensuring substantial energy savings and a reduced carbon footprint. With an impressive efficiency rating of 22.0 SEER, this model is designed to provide optimal comfort while minimizing energy costs.
The T2D model is equipped with advanced technology for ultra-quiet operation, ensuring a peaceful environment in your home. It is also designed to withstand harsh winters, featuring a heating element that prevents ice and snow buildup and a special heating mode that maintains a minimum temperature to protect your home during freezing climates.
The Installation: Precision and Expertise
Our team encountered a medium level of difficulty during the installation, but thanks to our expertise and attention to detail, we overcame the challenges. The project required installing one head unit near the compressor and another much farther inside the house. The second head was specifically requested to be installed in the kitchen, a typically warm area of the home.
Despite the complexity, we were able to complete a clean installation exactly where the client requested. We also sent a team to perform finishing work and touch-ups with drywall and paint, ensuring seamless integration of the system into the home's interior.
The Result: A Satisfied Customer
The client was thrilled with the turnkey installation and the clean work we delivered. We believe our success lies in customer satisfaction, and this project was a testament to that belief.
The Haxxair T2D: A Closer Look
The Haxxair T2D is more than just a heat pump. It is a solution designed to enhance comfort and efficiency in your home. Here are some key features of this model:
- AHRI Certified: The model is AHRI certified, guaranteeing its performance and efficiency.
- Warranty: It comes with a 10-year warranty on the compressor and parts, with extended warranty options available.
- Voltage: The model operates on a 220V power supply.
- Sound Pressure Level: With a sound pressure level of 59.0 dB(A), it ensures quiet operation.
- Freon Gas: The model uses R-410A freon gas.
- Cooling and Heating Capacity: It offers a cooling capacity of 24,000 BTU and can operate efficiently even at -25°C.
In Conclusion
At AirGreen, we are committed to providing our clients with the best HVAC solutions. Our recent installation of the Haxxair T2D DoubleZone Wall-Mounted Heat Pump in Villeray, Montreal, is a testament to our dedication to quality, efficiency, and customer satisfaction.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).