Town of Kirkland : Get a permit to install a heat pump or air conditioning unit
Dear Residents of the Town of Kirkland,
We are AirGreen, your trusted partner for all your heating, ventilation, and air conditioning (HVAC) needs. We understand that each municipality has its own rules and regulations regarding the installation of heat pumps, and we are here to guide you through this process in your beautiful neighborhood of Kirkland.
Heat Pump Installation in Kirkland: What You Need to Know
1. Obtaining an Authorization Certificate:
Before any installation or replacement of a heat pump or pool pump, it is imperative to obtain an authorization certificate. This document is issued by the urban planning service at a cost of $50.00. To apply, you must provide a copy of your property's location certificate, precisely indicating where the heat pump will be located, along with the decibel levels produced by the device.
2. Location of the Heat Pump:
According to Article 10.7 of zoning regulation no. 90-58, heat pumps can only be installed at the rear or side of your residence. Installation at the front is strictly prohibited.
3. Noise Level:
Regulation no. 2013-54 stipulates that the noise emitted by your heat pump should not exceed 60 decibels between 7 am and 11 pm, and 55 decibels between 11 pm and 7 am. These measurements should be taken 1.5 meters above the ground, at the boundary of your property, using a precision sound level meter.
Your Responsibility:
It is important to note that compliance with these rules and obtaining the necessary authorizations are the responsibility of the property owner. We strongly encourage you to consult and understand these regulations before proceeding with any installation. Additionally, it would be wise to discuss and obtain agreement from your neighbors when necessary.
How We Can Assist You:
At AirGreen, we are dedicated to providing you with exceptional service. While compliance responsibility and permit acquisition fall on you, we are here to offer our expertise and advice at every step of the process. Unless otherwise stipulated in our contract, we will guide you to ensure that your installation meets all standards and regulations in force in Kirkland.
Conclusion:
Installing a heat pump is a process that requires particular attention to the rules and regulations of the Town of Kirkland. As responsible and respectful residents, we are confident that you will take the necessary measures to comply with these requirements. And remember, the AirGreen team is always here to assist and guide you through this process.
For more information or to schedule a consultation, please do not hesitate to contact us. We are here to serve you!
Kind regards,
The AirGreen Team