Clean Comfort DV065 Dehumidifier | Installation in Montreal, Laval, Longueuil, South Shore and North Shore

SKU: DV065
65 pints/day2.22 L per kWhWarranty up to 6 years
Talk to an HVAC technician · 514 316-2973
Parts warranty up to 6 yearsBuilt-in humidity controlDrains continuously
01 · Your basement

Is it the right size for your home?

It removes 65 pints a day according to the spec sheet. Choose your home's living area, then what you see in the basement.

Living area

What you see in the basement

It's the right size.

For a 2,200 to 2,800 sq ft home with condensation on the walls or windows, you need to remove about 102 pints a day (spec sheet conditions). It removes 65: enough for the house, with some reserve for humid weeks in July.

Calculation: pints a day needed for the living area and the basement's condition, at the spec sheet's test conditions. Our estimator measures the humidity on site before ordering.

02 · Performance

What it does, in numbers

65pints
Per day, at 80 °FThat's 30.8 L of water, per the spec sheet.
47pints
Per day, at 70 °FCloser to a basement in summer.
577W
While runningCalculated from the spec sheet.
160cfm
Air movedFan airflow, without ducts.
What it costs to run

$95

Electricity per year

8 h of running a day, May to October

1,000 W baseboard$164
Clean Comfort DV065$95
100 W light bulb$16

Same calculation for every line: wattage × running hours × 184 days (May to October) × 11.142 ¢/kWh. The unit stops on its own once the target humidity is reached, so its running hours depend on your basement.

849kWh
Per year
5.0¢
Per litre of water removed
$0.06
Per hour of running
Pints removed per day, by temperatureAt 60% humidity, per the spec sheet.
80 °F · test bench65 pints
70 °F · a basement in summer47 pints
60 °F · a basement in spring34 pints

Capacities, efficiency and electrical data: manufacturer's spec sheet. Running wattage calculated: litres per day ÷ litres per kWh ÷ 24 h. Cost: Hydro-Québec Rate D, second tier (11.142 ¢/kWh), in effect since April 1, 2026.

03 · Good to know

What you should know about this one

Published, verifiable facts, not brochure claims.

160 cfmAirflow that holds up with ducts

The spec sheet gives 160 cfm with no ducts, 140 cfm at 0.2 in., 120 cfm at 0.4 in. and 100 cfm at 0.6 in. of static pressure. Short, straight 8 in. ducts keep the airflow close to the maximum.

E-coatElectrocoated coil

The coil is electrocoated. According to Clean Comfort, this reduces corrosion and helps prevent refrigerant leaks.

8 inThe most compact on its spec sheet

8 in. ducts, a 9 × 11 in. filter and 60 lb: it is the smallest of the three models on the 10/20 spec sheet (DV065, DV090, DV120). It fits more easily in a crowded mechanical room.

65 → 34What it really removes in a basement

65 pints a day at 80 °F, 47 at 70 °F and 34 at 60 °F, always at 60% humidity: those are the numbers on the manufacturer's spec sheet. The cooler the air, the less it removes.

2.22 LWhat it removes per kWh

Each kilowatt-hour removes 2.22 litres of water from the air. At Hydro-Québec's Rate D, that's about 5.0 ¢ per litre.

1 °CIt works in a cold basement

Operating range of 1.1 to 57.2 °C around the unit, per the spec sheet: it keeps working in spring and fall, when the basement is still cool and damp.

MERV 11The filter

Filter: MERV 11, 9 × 11 × 0.75 in. It protects the coil and captures part of the particles in the basement air.

Built-inHumidity control is included

No wiring to an external control: plug it in and it manages the humidity on its own. A wall control is still possible when it's connected to ducts.

6 yrsThe parts warranty

Manufacturer's limited warranty on parts: up to 6 years in an owner-occupied home, 1 year in other cases. It ends if the unit is moved (06/2022 warranty certificate).

04 · Installation

What it needs on site

8 in ductsAir inlet and outlet
Floor drain¾ in. female NPT fitting
60 lbUnit weight
120 V · 5.2 AStandard outlet

In a finished basement, we put it in the mechanical room and connect it with ducts to keep the noise away from living spaces. Our estimator checks the location, the drain and the duct route before ordering.

Complete spec sheetData and cited sources
Capacity at 80 °F · 60% RH
65 pints/day (30.8 L)
Capacity at 70 °F · 60% RH
47 pints/day
Capacity at 60 °F · 60% RH
34 pints/day
Energy efficiency
2.22 L/kWh
Power supply
120 V · 5.2 A
Running wattage (calculated)
≈ 577 W
Airflow (0 in. w.g.)
160 cfm
Ducts
8 in inlet and outlet
Filter
MERV 11, 9 × 11 × 0.75 in
Operating range
1.1 to 57.2 °C around the unit
Humidity control
Built-in
Weight
60 lb
Warranty
Up to 6 years on parts

Capacities, efficiency, power supply, airflow, ducts, filter, operating range and weight: manufacturer's spec sheet. Running wattage calculated: 30.8 L per day ÷ 2.22 L/kWh ÷ 24 h. Costs: Hydro-Québec Rate D, second tier (11.142 ¢/kWh), in effect since April 1, 2026.

05 · In the same family

The next model down and up

Clean Comfort DV065You are here65 pints
Clean Comfort DV070LargerHomes up to 1,800 sq ft70 pints

Talk to an HVAC technician before you choose

We measure the humidity on site, check the drain and the duct route, and give you an installed price.

Clean Comfort DV065: a whole-house dehumidifier with a built-in control

The DV065 connects to 8 in. ducts and removes 65 pints of water a day at 80 °F and 60% humidity. In a cooler basement, Clean Comfort's spec sheet gives 47 pints at 70 °F and 34 pints at 60 °F. Each kilowatt-hour removes 2.22 litres of water.

Its control

According to Clean Comfort, its built-in humidity control needs no wiring to an external control: you plug it in and it works. The spec sheet also lists external controls for centrally ducted control.

What it needs on site

A 120 V outlet (5.2 A), 8 in. ducts and a drain on the ¾ in. female NPT fitting. The 9 × 11 × 0.75 in. MERV 11 filter is changed at maintenance. The unit weighs 60 lb.

The warranty

Up to 6 years on parts in an owner-occupied home, 1 year in other cases, under Clean Comfort's 06/2022 warranty certificate. It ends if the unit is moved from where it was first installed.

In-home estimate

No installed price without seeing the house. Our estimator checks the location, the ducts, the drain and the electrical outlet, then we give you a price. Service in Montréal, Laval, Longueuil, the South Shore and the North Shore. Call 514 316-2973.