Commercial dehumidifier: SECARR SDA SDAF-016 from THERMOPLUS AIR

In stock
7.1 lb/h · 3.2 L/h 400 cfm R-410A Light commercial · residential
Price on quoteThe price depends on voltage, options, ductwork and access to the mechanical room.
Licensed contractor · RBQ 5645-9605-01 Free on-site estimate Greater Montréal, Laval, South and North Shore
01 · Your space

What it removes in your conditions

Pick the temperature and humidity of your space. The capacity comes straight from the THERMOPLUS AIR performance table for the SDAF-016.

Moisture removed

In a full day

Source: THERMOPLUS AIR SDA performance table (70 to 90 °F, 40 to 70 % RH). 1 lb of water = 0.4536 L; a US pint of water weighs about 1.043 lb.

02 · Performance

What it removes, in numbers

7.1lb of water per hour at 82 °F and 60 % RH
77litres in 24 h of continuous running
400cfm nominal airflow
93kg (205 lb) to set in place

Its place in the SDA series (lb/h)

Capacity by temperature and humidity (lb/h)

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026. Capacity at the manufacturer's rating conditions; it changes with the actual temperature and humidity.

03 · Operating cost

What does it cost to run?

Set your schedule. The math uses current Hydro-Québec rates and updates live.

Operating hours per day
Months of use per year
Compressor run time
Electricity rate
THERMOPLUS AIR does not publish input power. This is our estimate from the cutsheet: compressor rated load 7.4 A at 208-230 V · 1-phase × 0.85 power factor, plus the blower. It is a cautious ceiling; enter the kW from your spec sheet if you have it.
Electricity per year
Per month
Per operating hour
Energy
Water removed (max.)
Cost per litre removed
Ceiling: 24 h at 100 %

Method: kW × hours/day × 30.4 days × run time × months. Rate G: 12.388 ¢/kWh up to 15,090 kWh a month, 9.534 ¢ after. Rate M: 6.292 ¢/kWh up to 210,000 kWh, 4.666 ¢ after (demand charge not included). Rate D: 7.065 ¢/kWh for the first 40 kWh a day, 11.142 ¢ after. Hydro-Québec rates in force since April 1, 2026, before tax; access fees and demand charges excluded. Water removed uses the rated capacity, so it is a maximum. Indicative estimate.

04 · Why the SDAF-016

More capacity in the SDAF-012 cabinet

+22 %

More than the SDAF-012, same cabinet

7.1 lb/h vs 5.8 lb/h at 82 °F and 60 % RH, in the same 29 × 30 × 18 in.

400

Cubic feet per minute

400 cfm vs 300 for the SDAF-012, with the same 0.17 kW EC plenum fan.

120 V

Offered on 115-120 V single-phase

Minimum circuit ampacity of 17 A at 120 V, 11 A at 208-230 V single-phase.

P-SDA

Optional portable kit

Like the SDAF-012, it comes in a portable version.

Pick it if: the SDAF-012 is a bit small and you want to keep the same small cabinet, on 120 V or 208-230 V.
05 · Compare

Against the other models in the series

Pick a model: the differences are computed against the SDAF-016.

SDAF-016Difference

06 · Installation

Will it fit through your doors?

Pick the clear width of your narrowest passage. We compare it with the narrow side of the SDAF-016 (29 × 30 × 18 in).

Power supplyBlowerCompressor RLA / LRAMCAMOP
115-120 V · 1-phase0.17 kW · 2 A11.9 / 55 A17 A25 A
208-230 V · 1-phase0.17 kW · 1.6 A7.4 / 33 A11 A15 A
On site: a condensate drain, supply and return ducts sized for 0.5 in of static pressure, access to the filter, and a 24 V control wire to the humidistat. Electrical work is done under the same licence (RBQ subclass 16).
07 · Options

Build your configuration

Tick what matters to you, then send the list with your quote request. Every option comes from the THERMOPLUS AIR cutsheet.

08 · Your project

From site visit to start-up

On-site estimate, freeRoom size, moisture sources, ducting route and electrical service.
Model selectionWe confirm the right model in the series, the voltage and the options.
Detailed quoteUnit, options, ductwork, electrical and handling, line by line.
InstallationAirGreen refrigeration technicians and electricians, RBQ licence 5645-9605-01.
Start-upSettings, humidity set point and a walkthrough of the controls with your team.
09 · FAQ

Questions we hear often

What spaces is the SDA series built for?

THERMOPLUS AIR describes it as a compact dehumidifier for light commercial and residential use: basements, storage rooms, mechanical rooms, archives and other spaces where humidity must stay low.

Can it be ducted?

Yes. The EC plenum fan is rated at 0.5 in of external static pressure, and the supply can leave from the top or the side per the cutsheet.

Why does capacity change with temperature?

Warmer, more humid air holds more water to remove. The THERMOPLUS AIR cutsheet gives capacity from 70 to 90 °F and 40 to 70 % RH; the explorer above uses that table.

How do I know the SDAF-016 is big enough?

With a needs assessment: room volume, infiltration, moisture sources and target humidity. We do it during the on-site estimate.

Why is there no price shown?

The price depends on voltage, options, ductwork, handling and access to the mechanical room. We price it after the on-site estimate, which is free.

Full specifications
Model
SECARR SDAF-016
Moisture removal
7.1 lb/h (3.2 L/h) at 82 °F, 60 % RH
Sensible / total cooling
9,600 / 17,600 BTU/h at 82 °F, 60 % RH
Nominal airflow
400 cfm, 0.5 in external static pressure
Compressor
Rotary
Reheat
Full (standard)
Refrigerant
R-410A, 3.5 lb
Filter
MERV 8, 16 × 16 × 2 in
Dimensions (L × W × H)
29 × 30 × 18 in
Weight
205 lb (93 kg)
Fan
EC plenum
Casing
Pre-painted G90 galvanized steel, 1/2 in insulation
Coils
Epoxy fins

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026.

AirGreen

Humidity under control, all year

Free on-site estimate. Refrigeration and electrical work under one licence, RBQ 5645-9605-01.

THERMOPLUS AIR SECARR SDA SDAF-016: A Comprehensive Product Review

Welcome to our detailed review of the SECARR SDA SDAF-016, one of the commercial dehumidifiers offered by AirGreen, a Montréal HVAC company. This machine is instrumental in ensuring the ideal indoor environment, making it suitable for various settings, including greenhouses, restaurants, warehouses, and storage facilities.

Compact Yet Robust

Despite being compact, the SECARR SDA SDAF-016 is a powerful and versatile dehumidifier, delivering 7.1 lb/h at 82 °F and 60 % RH. This product is more than just a dehumidifier - it's a comprehensive R410A dehumidification unit that comes with an optional air or water-cooled air conditioning feature, making it perfect for light commercial and residential dehumidification applications.

Key Features

This machine comes with several essential standard features that simplify its operation:

• EC Plenum Fan Motor: This efficient and quiet fan ensures effective air circulation.

• 24V Terminal Strip: The strip allows easy connection to the thermostat.

• Refrigerant High and Low-Pressure Cut-Out Switches: These safety features protect the system against pressure irregularities.

• Access Ports: The dehumidifier includes access ports on the high and low sides for convenient pressure checks.

• Thermostatic Expansion Valve: This feature regulates the flow of refrigerant in the evaporator, aiding the unit's cooling function.

• Rotary Compressor (models 012 and 016) or Scroll Compressor (models 024 to 060): The unit is equipped with a sturdy rotary or scroll compressor, depending on the model, for effective humidity control.

• Epoxy Fin Coils: These coils enhance heat transfer efficiency and ensure corrosion resistance.

• Pre-Painted G90 Galvanized Casing with 1/2" Insulation: The casing is designed to withstand tough conditions, while the insulation optimizes energy efficiency.

• 2" MERV 8 Filter: This quality air filter effectively removes airborne particles, promoting cleaner and healthier air.

• Full Reheat: This feature enables the unit to warm the conditioned air, helping to maintain a comfortable temperature in the serviced area.

Operating Range

The SECARR SDA SDAF-016 operates within a specific range to ensure peak performance:

• Entering Air Temperature and Humidity: The sheet publishes capacity from 70 to 90 °F and 40 to 70 % RH.

• ESP - Direct Drive: The External Static Pressure (ESP) can be adjusted up to 0.5", influencing the device's air flow rate.

Customizable Options

The SECARR SDA SDAF-016 also offers a variety of optional features to enhance its performance and flexibility:

• Multi Discharge Options: These offer greater flexibility for the device's installation and usage.

• Aqua Aero Coated Coils: This option provides increased corrosion resistance and improved performance.

• Copper Fin Coils: An upgrade for better heat transfer efficiency.

• Non-Fused Disconnect: This safety feature allows for easy power disconnection when necessary.

• Partial Reheat: An option for spaces that require less heat.

• Air or Water-Cooled Option: This option allows you to choose between air or water-cooled air conditioning, depending on your needs.

• Remote Air-Cooled Condenser: This accessory enables the unit to reject heat outdoors, enhancing efficiency.

• Merv11 or 13 Filters: Higher MERV-rated filters for improving air quality are available.

• Humidistat/Thermostat: These controls allow for easy adjustment of humidity and temperature.

• DDC Controls with BACnet: This advanced control option facilitates integration with building management systems.

• Portable Kit (for models 012 and 016 only): This allows you to easily move the dehumidifier between different spaces as needed.

Durable Design

The SECARR SDA SDAF-016 is a compact dehumidifier, designed for light commercial and residential dehumidification. Measuring 29" x 30" x 18", the device weighs 205 lbs, making it a space-efficient solution for your humidity control needs. The device is also loaded with 3.5 lbs of R410A refrigerant.

Detailed Standard Features

The SECARR SDA SDAF-016 comes with a series of standard features designed to optimize its operation and ensure user-friendly:

• Full Reheat Coil: This feature recovers heat generated during the dehumidification process and uses it to warm the air, ensuring a more comfortable indoor climate.

• Rotary Compressor: This type of efficient compressor is known for its quiet operation and excellent performance in controlling humidity levels.

• EC Plenum Fan: This fan design ensures optimal air movement throughout your space, contributing to uniform temperature and humidity levels.

• 24V Terminal Strip: This allows for easy integration with existing thermostat systems, giving you control over your dehumidifier's operation.

• High and Low-Pressure Switch: These safety devices shut off the compressor when the refrigerant pressure becomes too high or drops too low, protecting the device from damage.

• High and Low-Pressure Access Ports: These ports allow for easy access to measure the refrigerant pressure, facilitating regular maintenance and troubleshooting.

• Thermostatic Expansion Valve: This feature regulates the flow of refrigerant in the evaporator, helping the dehumidifier cool the air efficiently.

• Epoxy Fin Coils: These coils ensure efficient heat transfer while offering excellent corrosion resistance.

• Pre-Painted G90 Galvanized Casing with 1/2" Insulation: The casing is designed for durability, while the insulation helps maintain energy efficiency.

• 2" MERV 8 Filter: This high-quality filter removes airborne particles before they circulate back into your space, contributing to a cleaner and healthier indoor environment.

Detailed Optional Features

The SECARR SDA SDAF-016 also comes with a range of optional features that enhance its functionality and make it adaptable to various situations:

• Aqua Aero Coated Coils: These coated coils offer better performance and increased corrosion resistance, ensuring the device's long-term reliability.

• Copper Fin Coils: These optional coils can further improve the efficiency of heat transfer, enhancing the dehumidifier's performance.

• Non-Fused Disconnect: This option provides an additional layer of safety, allowing for easy power disconnection when necessary.

• Humidistat/Thermostat: These controls give you precise control over the humidity and temperature in your space, enabling you to create the ideal indoor climate.

• Digital Controls with BACnet: These advanced controls can connect to building management systems, allowing easy control and monitoring of the dehumidifier as well as other building services.

• 2" MERV 11 or 13 Filters: These higher MERV-rated filters can capture even smaller particles, further improving air quality.

• Portable Kit Option: Available for models 012 and 016, this kit allows you to easily move the dehumidifier between different spaces as needed.

Complete Control of the Indoor Environment

The SECARR SDA SDAF-016 isn't just a dehumidifier, it's a complete solution for indoor air quality control. It is specifically designed for indoor installation; the sheet requires ETL or CSA listing and compliance with BOCA codes M-401 and M-402.1. The packaged system includes dehumidification, air heating/cooling, and a host of advanced features.

In conclusion, the SECARR SDA SDAF-016 by THERMOPLUS AIR is an advanced, versatile, and high-performance commercial dehumidification solution. It's designed to deliver optimal indoor air quality, ensuring a comfortable and healthy environment for all.

Sold and installed by AirGreen. Montréal, Laval, Longueuil, the South Shore and the North Shore. Manufacturer sheet: THERMOPLUS AIR SECARR SDA sheet (PDF).