Commercial dehumidifier: SECARR SDA SDAF-048 from THERMOPLUS AIR

In stock
21.5 lb/h · 9.8 L/h 970 cfm R-410A Light commercial · residential
Price on quoteThe price depends on voltage, options, ductwork and access to the mechanical room.
Licensed contractor · RBQ 5645-9605-01 Free on-site estimate Greater Montréal, Laval, South and North Shore
01 · Your space

What it removes in your conditions

Pick the temperature and humidity of your space. The capacity comes straight from the THERMOPLUS AIR performance table for the SDAF-048.

Moisture removed

In a full day

Source: THERMOPLUS AIR SDA performance table (70 to 90 °F, 40 to 70 % RH). 1 lb of water = 0.4536 L; a US pint of water weighs about 1.043 lb.

02 · Performance

What it removes, in numbers

21.5lb of water per hour at 82 °F and 60 % RH
234litres in 24 h of continuous running
970cfm nominal airflow
206kg (455 lb) to set in place

Its place in the SDA series (lb/h)

Capacity by temperature and humidity (lb/h)

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026. Capacity at the manufacturer's rating conditions; it changes with the actual temperature and humidity.

03 · Operating cost

What does it cost to run?

Set your schedule. The math uses current Hydro-Québec rates and updates live.

Operating hours per day
Months of use per year
Compressor run time
Electricity rate
THERMOPLUS AIR does not publish input power. This is our estimate from the cutsheet: compressor rated load 14.5 A at 208-230 V · 3-phase × 0.85 power factor, plus the blower. It is a cautious ceiling; enter the kW from your spec sheet if you have it.
Electricity per year
Per month
Per operating hour
Energy
Water removed (max.)
Cost per litre removed
Ceiling: 24 h at 100 %

Method: kW × hours/day × 30.4 days × run time × months. Rate G: 12.388 ¢/kWh up to 15,090 kWh a month, 9.534 ¢ after. Rate M: 6.292 ¢/kWh up to 210,000 kWh, 4.666 ¢ after (demand charge not included). Rate D: 7.065 ¢/kWh for the first 40 kWh a day, 11.142 ¢ after. Hydro-Québec rates in force since April 1, 2026, before tax; access fees and demand charges excluded. Water removed uses the rated capacity, so it is a maximum. Indicative estimate.

04 · Why the SDAF-048

More capacity in the SDAF-038 cabinet

+21 %

More than the SDAF-038, same cabinet

21.5 lb/h vs 17.7 lb/h at 82 °F and 60 % RH, in the same 48 × 36.5 × 23 in.

970

Cubic feet per minute

970 cfm vs 840 for the SDAF-038.

495

Pints a day at 82 °F, 60 % RH

About 234 litres a day running continuously, at cutsheet conditions.

13

GPM in water-cooled mode

The water-cooled option needs 13 GPM at 85 °F, 3/4-in connections.

Pick it if: the SDAF-038 is a bit small and you want to keep the same cabinet, or you need more airflow.
05 · Compare

Against the other models in the series

Pick a model: the differences are computed against the SDAF-048.

SDAF-048Difference

06 · Installation

Will it fit through your doors?

Pick the clear width of your narrowest passage. We compare it with the narrow side of the SDAF-048 (48 × 36.5 × 23 in).

Power supplyBlowerCompressor RLA / LRAMCAMOP
208-230 V · 1-phase0.78 kW · 3.9 A21.4 / 135 A31 A50 A
208-230 V · 3-phase0.78 kW · 3.9 A14.5 / 98 A22 A35 A
460 V · 3-phase0.78 kW · 2.9 A6.3 / 55 A11 A15 A
575 V · 3-phase0.78 kW · 1.7 A6 / 41 A10 A15 A
On site: a condensate drain, supply and return ducts sized for 0.5 in of static pressure, access to the filter, and a 24 V control wire to the humidistat. Electrical work is done under the same licence (RBQ subclass 16).
07 · Options

Build your configuration

Tick what matters to you, then send the list with your quote request. Every option comes from the THERMOPLUS AIR cutsheet.

08 · Your project

From site visit to start-up

On-site estimate, freeRoom size, moisture sources, ducting route and electrical service.
Model selectionWe confirm the right model in the series, the voltage and the options.
Detailed quoteUnit, options, ductwork, electrical and handling, line by line.
InstallationAirGreen refrigeration technicians and electricians, RBQ licence 5645-9605-01.
Start-upSettings, humidity set point and a walkthrough of the controls with your team.
09 · FAQ

Questions we hear often

What spaces is the SDA series built for?

THERMOPLUS AIR describes it as a compact dehumidifier for light commercial and residential use: basements, storage rooms, mechanical rooms, archives and other spaces where humidity must stay low.

Can it be ducted?

Yes. The EC plenum fan is rated at 0.5 in of external static pressure, and the supply can leave from the top or the side per the cutsheet.

Why does capacity change with temperature?

Warmer, more humid air holds more water to remove. The THERMOPLUS AIR cutsheet gives capacity from 70 to 90 °F and 40 to 70 % RH; the explorer above uses that table.

How do I know the SDAF-048 is big enough?

With a needs assessment: room volume, infiltration, moisture sources and target humidity. We do it during the on-site estimate.

Why is there no price shown?

The price depends on voltage, options, ductwork, handling and access to the mechanical room. We price it after the on-site estimate, which is free.

Full specifications
Model
SECARR SDAF-048
Moisture removal
21.5 lb/h (9.8 L/h) at 82 °F, 60 % RH
Sensible / total cooling
27,200 / 51,400 BTU/h at 82 °F, 60 % RH
Nominal airflow
970 cfm, 0.5 in external static pressure
Compressor
Scroll
Reheat
Partial (full optional)
Refrigerant
R-410A, 7 lb
Filter
MERV 8, 20 × 25 × 2 in
Dimensions (L × W × H)
48 × 36.5 × 23 in
Weight
455 lb (206 kg)
Outdoor condenser (option)
CDS-066, 5/8 and 1/2 in lines, 50 ft max.
Water-cooled (option)
13 GPM at 85 °F, 5 psi, 3/4 in FPT
Fan
EC plenum
Casing
Pre-painted G90 galvanized steel, 1/2 in insulation
Coils
Epoxy fins

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026.

AirGreen

Humidity under control, all year

Free on-site estimate. Refrigeration and electrical work under one licence, RBQ 5645-9605-01.

Sale and installation of the SECARR SDA Commercial Dehumidifier  SDAF-048 of THERMOPLUS AIR everywhere in Greater Montreal, Laval, Longueuil, South Shore and North Shore.

AirGreen, an HVAC company in Montreal, presents the SECARR SDA SDAF-048 by THERMOPLUS AIR, a compact dehumidifier of meticulous design. It represents an ideal solution for light commercial and residential dehumidification applications, including greenhouses, restaurants, warehouses, storage facilities, and more.

Comprehensive Design & Specifications

The SECARR SDA SDAF-048 comes with robust specifications that reflect its quality and capabilities. Encased within its compact unit dimensions of 48 x 36.5 x 23 inches and weighing 455 lbs, this dehumidifier provides an airflow of 970 CFM (Cubic Feet per Minute) with an external static pressure of 0.5 inches. It can efficiently eliminate 21.5 lb/h of moisture from the surrounding environment at 82 °F and 60 % RH, making it a highly effective solution for maintaining optimal humidity levels.

Standard Features & Available Options

The SDA SDAF-048 is brimming with advanced features that ensure efficient and reliable dehumidification. These include a partial reheat coil, scroll compressor, EC plenum fan, 24V terminal strip, thermostatic expansion valve, high and low-pressure switch and access ports, epoxy fin coils, and a 2" MERV 8 filter, among others. All these features, coupled with a pre-painted G90 galvanized casing and 1/2" insulation, come together to provide reliable and efficient performance.

To cater to various specific needs, the SDA SDAF-048 also offers several optional upgrades. These include a full reheat coil, Aqua Aero coated coils, copper fin coils, a compressor sound cover, and digital controls with BACnet. Users can choose between air-cooled and water-cooled air conditioning based on their requirements. Additionally, you can opt for enhanced air filtration with 2" MERV 11 or 13 filters.

Build Quality

The SDA SDAF-048 is manufactured with high-quality, pre-painted G90 galvanized sheet metal. The interior is thoughtfully designed with separate sections for coils, drain pan, blower, and the compressor and refrigeration components. This not only allows efficient airflow but also makes servicing and maintenance a breeze.

Evaporator & Piping Design

The SECARR SDA SDAF-048 adheres strictly to BOCA codes for corrosion-resistant coating and joints and connections standards. It employs type "L" copper pipes that are vinyl-coated for corrosion prevention. The evaporator comprises a 3/8-inch OD seam-free copper tube mechanically expanded into a plate-type aluminum corrugated fins design, ensuring a high heat transfer. The evaporator, designed with a depth of at least four rows, ensures maximum moisture removal capacity with air velocity not exceeding 300 FPM.

Condenser Design

The SDA SDAF-048 comes with a meticulously designed condenser or air reheat coil. It is designed with a depth of not less than four rows and a maximum of 12 fins per inch. It employs a 3/8-inch OD seam-free copper tube mechanically expanded into plate-type aluminum corrugated fins for efficient heat transfer. Like the evaporator, the condenser features hydrophilic properties (EPOXY COAT) providing enhanced corrosion protection and enhancing the unit's performance.

Comprehensive Control Features

At the heart of the SDA SDAF-048 is its advanced control panel, which offers easy navigation and monitoring of the dehumidifier's functionalities. The control panel also houses the optional solid-state fully programmable controller with integrated ethernet interfaces for BACnet communication protocol. This feature allows users to fully monitor the unit under all conditions and adjust setpoints either on the controller or via the Building Management System (BMS).

Sold and installed by AirGreen. Montréal, Laval, Longueuil, the South Shore and the North Shore. Manufacturer sheet: THERMOPLUS AIR SECARR SDA sheet (PDF).