FANTECH FIT 120H Air Exchanger Greater Montreal
Is it the right size for your home?
It delivers 112 cfm net, enough to ventilate 1,300 to 2,100 sq ft. Choose your home's living area.
It's the right size.
For a 1,500 to 2,500 sq ft home, about 105 cfm of air needs to be renewed continuously. This unit delivers 112 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$64.42
Electricity per year
Less than a 100 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Meets the Québec Construction Code for Greater Montréal. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 56% at 65 cfm.
Airflow and efficiency: manufacturer's published data. Cost: 66 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
10.25 inFlat 10.25 in HRV for a false ceiling
Fantech designed it for condos and apartments with no mechanical room, where the unit must go above a false ceiling. It is only 10.25 in high and mounts with the supplied ceiling bracket.
8 inCore comes out underneath with 8 in of clearance
Fantech recommends 8 in free below the unit to remove the core, and 3 in is required to open the door. Plan for it in the false-ceiling access opening.
56%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 65 cfm.
ExhaustIt defrosts by pausing the fresh air for a few minutes
In cold weather, the supply fan stops for a few minutes while the exhaust keeps running, so warm indoor air thaws the core. During the cycle the house is briefly under negative pressure; if you have a fireplace or a naturally vented combustion appliance, mention it to our estimator.
HRVIt recovers heat, not moisture
Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.
−22 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 134 to 112 cfm. Most spec sheets show only the first number, precisely because it looks better.
66 WMeasured at the airflow it actually runs at
Its 65% at 0 °C is measured at 60 cfm, the continuous airflow of a typical home. At that setting it draws 66 W, or about 578 kWh a year.
LifetimeThe core warranty
The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years. We register the warranty in your name at commissioning.
5 inWhat it needs on site
5 in (oval) ducts, side connection and a condensate drain. It weighs 42 lb, and it needs enough clearance to slide the core out once a year.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 134 cfm
- Net airflow at 0.4 in. w.g.
- 112 cfm
- SRE at 0 °C (60 cfm)
- 65%
- SRE at −25 °C (65 cfm)
- 56%
- ASE at 0 °C
- 77%
- Power draw
- 66 W
- Efficacy
- 0.9 cfm/W
- Type
- HRV
- Connection
- Side ports
- Duct collars
- 5 in (oval)
- Condensate drain
- Required
- Defrost cycle
- Exhaust only (supply fan off)
- Filters
- 2 washable electrostatic panel filters (11.2 × 7 in and 11.4 × 7.7 in)
- Dimensions (L × D × H)
- 31 × 20.25 × 10.25 in
- Weight
- 42 lb
- Power supply
- 120 V
- Warranty — core
- Lifetime
- Warranty — motors
- 7 years
- Warranty — parts
- 5 years
Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 66 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
FANTECH FIT 120H Heat Recovery Ventilator: An Exceptional Solution to Enhance Indoor Air Quality
In our contemporary society, where people spend most of their time indoors, air quality has become a paramount concern. That's where the FANTECH FIT 120H Heat Recovery Ventilator comes in. This low-profile HRV is designed to keep the air in your living spaces fresh and healthy, making it an ideal choice for apartments and condos without a dedicated mechanical room. Here, we'll explore the unique features, advantages, and technical details of this innovative product.
Features of the FANTECH FIT 120H Heat Recovery Ventilator
The FIT 120H is equipped with several innovative features that make it stand out in the crowded marketplace of home ventilation systems.
Slim, Lightweight Design
The FIT 120H sports a slim design, standing just 10.25" (260 mm) tall, making it a perfect fit for installations above false ceilings. Its compact size doesn't compromise on its capacity to deliver quality air exchange. Moreover, the unit weighs only 42 lbs (19 kg), including the core, making it easier to handle and install.
Highly Efficient Fans
The FIT 120H features two factory-balanced fans equipped with backward curved RadiCAL blades. These fans are powered by motors with permanently lubricated, sealed ball-bearings, ensuring longevity and maintenance-free operation.
Superior Air Filtration
The FIT 120H is equipped with two washable electrostatic filters. These panel-type air filters effectively trap airborne particles, promoting healthier indoor air. Their washable nature also translates into cost savings, as you won't need to constantly purchase replacement filters.
Effective Heat Recovery Core
The unit's aluminum heat recovery core is designed to withstand extreme temperature variations. During winter, the heat from the outgoing air warms the incoming fresh air, helping you save on energy costs. During summer, if the house is equipped with an air cooling system, the incoming air is pre-cooled, contributing to a more comfortable living environment.
Automatic Defrost Mechanism
The FIT 120H is equipped with an automatic defrost mechanism that activates at an outdoor air temperature of 23°F (-5°C) or lower. This feature ensures that the unit operates effectively all year round, providing you with fresh, clean air no matter the weather outside.
Easy Maintenance and Installation
The FIT 120H has been designed with easy maintenance and installation in mind. The core, filters, fans, drain pan, and electrical panel can all be accessed easily from the access panel. Moreover, the core conveniently slides out with only 8" (203 mm) of clearance, making maintenance tasks more convenient. The unit can be easily hung using the ceiling bracket supplied with the unit.
Optional Controls for Greater Flexibility
The FIT 120H offers several optional controls for flexible operation, including ECO-Touch™, EDF7, EDF1, RTS5, RTS2, and MDEH1. These controls allow for multiple speed operation and let you customize the ventilation to suit your specific needs.
Technical Specifications of the FANTECH FIT 120H
The FIT 120H is designed with state-of-the-art specifications that enable it to deliver top-notch performance.
- Duct Size: The unit accommodates a 5" (125 mm) oval duct size.
- Power: The FIT 120H operates at a voltage/phase of 120/1, with a power rating of 170 W.
- Amperage: The unit runs on 1.4 A, ensuring energy-efficient operation.
- Average Airflow: The FIT 120H delivers an average airflow of 112 cfm (53 L/s) at 0.4" Ps (100Pa), sufficient for maintaining a healthy indoor air environment in most homes.
A Commitment to Quality and Durability
The FIT 120H's robust construction assures you of its durability and longevity. The unit's casing is made from 24 gauge G90 galvanized steel, providing it with the strength to withstand various environmental conditions.
Moreover, the unit is insulated with 1 in. (25 mm) of foil-faced high-density polystyrene foam and an additional 0.25 in. (6 mm) of closed-cell foam on the top of the unit, enhancing its efficiency and durability.
Warranty and Certifications
The FIT 120H comes with a limited lifetime warranty on the aluminum core, a 7-year warranty on motors, and a 5-year warranty on other parts. This demonstrates Fantech's confidence in the quality and longevity of their products.
Furthermore, the FIT 120H meets the UL 1812 requirements for Heat Recovery Ventilators, adheres to the CSA C22.2 no. 113 Standard applicable to ventilators, and complies with the CSA F326 requirements for the installation of Heat Recovery Ventilators. This assures you that you're investing in a product that meets rigorous safety and performance standards.
In Conclusion
Improving indoor air quality is not just a matter of comfort—it's a matter of health. The FANTECH FIT 120H Heat Recovery Ventilator represents a powerful, efficient, and user-friendly solution for air exchange, helping to create healthier and more comfortable living spaces.
For those seeking an air exchanger that combines a compact, low-profile design with powerful performance, the FANTECH FIT 120H is an excellent choice. Its innovative design, user-friendly features, and energy-efficient operation make it an ideal solution for improving indoor air quality, making homes more comfortable, healthier, and energy-efficient.
At AirGreen, your health and comfort are our top priorities. That's why we're proud to offer the FANTECH FIT 120H Heat Recovery Ventilator, a product that aligns perfectly with our commitment to delivering superior air quality solutions. Contact us today to learn more about how this exceptional air exchanger can enhance the air quality in your home.