FANTECH SHR 150R Air Exchanger Greater Montreal

In stock
155 cfm net1,800 to 2,900 sq ft60% at −25 °C
Talk to an HVAC technician · 514 316-2973
Meets the Québec CodeLifetime core warranty
01 · Your home

Is it the right size for your home?

It delivers 155 cfm net, enough to ventilate 1,800 to 2,900 sq ft. Choose your home's living area.

It's the right size.

For a 1,500 to 2,500 sq ft home, about 105 cfm of air needs to be renewed continuously. This unit delivers 155 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.

Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.

02 · Performance

What it does, in numbers

Heat recovery
60%
At −25 °CCode: 54% minimum
66%
At 0 °CMeasured at 85 cfm
Net airflowThe ducts cost it 21 cfm
0.2 in · test bench176 cfm
0.4 in · with ducts155 cfm

$71.25

Electricity per year

Less than a 100 W light bulb

Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.

73W
Running continuously
639kWh
Per year
3months
Filter cleaning

Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 60% at 89 cfm.

Airflow and efficiency: manufacturer's published data. Cost: 73 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).

03 · Good to know

What you should know about this one

Published, verifiable facts, not brochure claims.

17 inCore on glide guides: 17 in of front clearance

Core, filters, fans and drain pan are reached through a latched door. The core slides on glide guides; Fantech recommends 17 in of clearance in front of the unit to remove it.

RockerBuilt-in basic control: low, standby or medium

Without a wall control, the unit's rocker switch (low, standby, medium) keeps ventilation running. Optional Fantech controls such as ECO-Touch IAQ, ECO-Feel or EDF7 can be added.

60%What it still recovers at −25 °C

The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 89 cfm.

DamperIt defrosts without depressurizing the house

In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.

HRVIt recovers heat, not moisture

Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, a home almost always has too much humidity, not too little.

−21 cfmWhat the ducts cost it

Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 176 to 155 cfm.

73 WMeasured at the airflow it actually runs at

Its 66% at 0 °C is measured at 85 cfm, the continuous airflow of a typical home. At that setting it draws 73 W, or about 639 kWh a year.

LifetimeThe core warranty

The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years.

6 inWhat it needs on site

6 in ducts, side connection and a condensate drain. It weighs 50 lb, and it needs enough clearance to slide the core out once a year.

04 · Installation

What it needs on site

6 in ductsCollar diameter
Side connectionSide ports
Condensate drainRequired
50 lbUnit weight
23.75 × 17.25 × 16.25 inLength × depth × height
120 VPower supply

In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.

Complete spec sheetData and cited sources
Net airflow at 0.2 in. w.g.
176 cfm
Net airflow at 0.4 in. w.g.
155 cfm
SRE at 0 °C (85 cfm)
66%
SRE at −25 °C (89 cfm)
60%
ASE at 0 °C
79%
Power draw
73 W
Efficacy
1.2 cfm/W
Type
HRV
Connection
Side ports
Duct collars
6 in
Condensate drain
Required
Defrost cycle
Recirculation (motorized damper)
Filters
2 washable electrostatic panel filters (8.5 × 15 in)
Dimensions (L × D × H)
23.75 × 17.25 × 16.25 in
Weight
50 lb
Power supply
120 V
Warranty — core
Lifetime
Warranty — motors
7 years
Warranty — parts
5 years

Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 73 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.

05 · In the Fantech range

The next model down and up

Talk to an HVAC technician before you choose

We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.

Introducing the Fantech SHR 150R Heat Recovery Ventilator

Enjoy a Breath of Fresh Air with AirGreen

AirGreen, a reputable Montreal-based HVAC company, is proud to supply high-quality air exchangers that improve the comfort and well-being of your home environment. Our products ensure a fresh, healthy indoor atmosphere while optimizing energy efficiency, for your peace of mind. Our featured product, the Fantech SHR 150R heat recovery ventilator (HRV), has features designed to deliver consistent air quality.

An Overview of the Fantech SHR 150R HRV

The Fantech SHR 150R is a versatile heat recovery ventilator intended for budget-conscious home projects. Its main job is to bring a steady supply of fresh air into your living space while exhausting an equal amount of contaminated air at the same time. This efficient exchange ensures that the air inside your home is always fresh and healthy.

A Breath of Fresh Air Whatever the Season

During the chilly winter months, the Fantech SHR 150R warms the incoming fresh air using heat from the outgoing air. This heat transfer not only keeps your indoor environment cozy but also provides energy savings. In summer, if your home has an air conditioning system, the incoming air is pre-cooled. With its automatic defrost mechanism, the SHR 150R ensures your HRV can be used all year round, providing consistent, economical ventilation.

Product Features of the Fantech SHR 150R HRV

The SHR 150R is designed for performance, easy maintenance and longevity. Below, we highlight some of its features:

Compact Dimensions

The SHR 150R has a compact design. Its modest dimensions make installation and maintenance very easy.

Backward-Inclined Blade Motors

Equipped with factory-balanced fans with backward-inclined blades, the SHR 150R provides long-lasting, maintenance-free operation. The motors are permanently lubricated with sealed ball bearings, which supports longevity and reliability.

Washable Electrostatic Filters

The SHR 150R comes with washable electrostatic filters. These reusable filters make maintenance simple and cost-effective while keeping the air always clean and healthy.

Aluminum Heat Recovery Core

At the heart of the SHR 150R is an aluminum heat recovery core, covered by a limited lifetime warranty. The core, measuring 9 in. x 9 in. (229 x 229 mm) with a depth of 15 in. (380 mm), is designed to withstand large temperature variations.

Optional Controls

The SHR 150R offers a variety of optional external controls to suit your specific needs, including ECO-Touch IAQ, a programmable touchscreen control; ECO-Feel, an automatic IAQ (Indoor Air Quality) control; EDF7, a multi-function electronic dehumidistat; EDF1R, a multi-function dehumidistat; RTS-W, a wireless 20/40/60-minute timer; RTS 2, a 20-minute override timer; RTS 5, a 20/40/60-minute timer; and MDEH 1, a dehumidistat.

Specifications

  • Duct diameter: 6 in. (152 mm)
  • Voltage/Phase: 120/1
  • Power: 156 W
  • Amperage: 1.6 A
  • Average airflow: 159 cfm (75 L/s) at 0.4 in. of water (100 Pa)

Maintenance

The SHR 150R's core, filters, fans and electrical panel are easy to reach through the latched access door. A clearance of 17 in. (432 mm) is recommended to remove the core.

Casing

The SHR 150R has a 22-gauge galvanized steel casing with a corrosion-resistant pre-painted steel door.

Insulation

The casing is fully insulated with high-density expanded polystyrene 1 in. (25 mm) thick.

Warranty

The Fantech SHR 150R HRV comes with a limited lifetime warranty on the aluminum core, a 7-year limited warranty on the motor and a 5-year warranty on parts.

Compliance and Standards

The Fantech SHR 150R complies with the UL 1812 standard and the CSA C22.2 No. 113 standard for fans, with the CSA F326 requirements for the installation of heat recovery ventilators, and it is HVI-certified.

Contact Us

Improve the air quality in your home and save on energy costs with the Fantech SHR 150R HRV. Contact us at AirGreen today to learn more about this product. Breathe easy knowing you are in good hands with AirGreen.