FANTECH SHR 2005R Air Exchanger Greater Montreal
What it does, in numbers
$105.41
Electricity per year
Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 64% at 126 cfm.
Airflow and efficiency: manufacturer's published data. Cost: 108 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
DialBalancing dial on the electrical box
A screw-type dial on the electrical box adjusts the supply airflow to match the exhaust airflow, so balancing is set right at the unit.
E-boxElectrical box mounted outside the cabinet
The electrical box sits outside the cabinet, so it is easy to reach for wiring and service. Core, filters, fans and drain pan are serviced through the latched front door.
64%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 126 cfm.
DamperIt defrosts without depressurizing the house
In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.
HRVIt recovers heat, not moisture
Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.
108 WMeasured at the airflow it actually runs at
Its 62% at 0 °C is measured at 65 cfm, the continuous airflow of a typical home. At that setting it draws 108 W, or about 946 kWh a year.
LifetimeThe core warranty
The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years. We register the warranty in your name at commissioning.
6 inWhat it needs on site
6 in ducts, side connection and a condensate drain. It weighs 62 lb, and it needs enough clearance to slide the core out once a year.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- SRE at 0 °C (65 cfm)
- 62%
- SRE at −25 °C (126 cfm)
- 64%
- ASE at 0 °C
- 77%
- Power draw
- 108 W
- Efficacy
- 0.6 cfm/W
- Type
- HRV
- Connection
- Side ports
- Duct collars
- 6 in
- Condensate drain
- Required
- Defrost cycle
- Recirculation (motorized damper)
- Filters
- 2 washable electrostatic panel filters (11.75 × 15 in)
- Dimensions (L × D × H)
- 27.88 × 17.38 × 20.5 in
- Weight
- 62 lb
- Power supply
- 120 V
- Warranty — core
- Lifetime
- Warranty — motors
- 7 years
- Warranty — parts
- 5 years
Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 108 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
Introducing the Fantech SHR 2005R Heat Recovery Ventilator
AirGreen, a premier HVAC company based in Montreal, is delighted to offer the Fantech SHR 2005R Heat Recovery Ventilator (HRV) as part of its extensive product lineup. As industry leaders, we specialize in the sale and installation of top-tier air exchangers, providing our customers with unparalleled air quality and energy efficiency solutions. This article will explore the unique features, benefits, and technical specifications of the SHR 2005R, which is a cutting-edge HRV specifically designed for larger residential projects that demand superior efficiency.
Unmatched Air Quality with Fantech SHR 2005R
The Fantech SHR 2005R is an advanced HRV model, engineered for applications requiring higher static pressure and increased airflow. This unit provides a consistent supply of fresh air into your home while expelling an equal amount of contaminated air. The ingenious heat transfer process during the ventilation not only purifies the air but also results in significant energy savings.
In winter, the incoming fresh air is warmed by the heat transferred from the outgoing air, thereby reducing the need for additional heating and consequently lowering energy costs. Similarly, in summer, if the house is equipped with an air cooling system, the incoming air is pre-cooled, providing a comfortable indoor climate while conserving energy.
A standout feature of the SHR 2005R is its automatic defrost mechanisms, which ensure the unit's smooth operation all year round, even during the cold winter months.
Salient Features of the SHR 2005R
The Fantech SHR 2005R boasts numerous notable features, making it an excellent choice for homeowners seeking high-quality ventilation solutions.
Compact Design
Despite its robust performance, the SHR 2005R has a compact design, facilitating easy installation and minimizing space requirements.
Advanced Fan System
The unit includes two factory-balanced fans with backward curved RadiCAL blades. These fans are engineered for long-lasting, maintenance-free operation, thanks to the permanently lubricated, sealed ball-bearings.
High-Efficiency Heat Recovery Core
The SHR 2005R features an aluminum heat recovery core designed for efficient cross-flow ventilation. Despite its compact size of 12" x 12" (305 x 305 mm) with a 15" (380 mm) depth, this core offers exceptional heat transfer performance. Manufactured by Fantech, it is built to withstand extreme temperature variations.
Defrost Mechanism
During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream. This allows the warm air from the house to circulate through the HRV, enhancing the defrost strategy's effectiveness. The exhaust blower shuts down, and the supply blower switches into high speed during this cycle. This prevents household odors from entering the home, ensuring the unit does not create negative pressure.
Convenient Airflow Balancing
The SHR 2005R features a screw-type dial on its electrical box. This allows for the easy adjustment of the supply airflow to match the exhaust airflow, facilitating optimal ventilation performance.
Easy Servicing and Maintenance
With the SHR 2005R, maintenance is a breeze. The core, filters, fans, and drain pan can be easily accessed through the latched access door located on the front of the cabinet. The core slides out effortlessly on an improved railing system, while the external electrical box is also easily accessible. For smooth removal of the core, a clearance of 17" (432 mm) is recommended.
Superior Construction and Insulation
The unit's case is made of 24 gauge galvanized steel, with baked powder-coated paint for added durability. Additionally, the cabinet is fully insulated with 1” (25 mm) high-density expanded polystyrene, providing excellent thermal efficiency.
Washable Electrostatic Filters
The SHR 2005R includes two washable electrostatic panel type air filters, measuring 11.75” (298 mm) x 15” (380 mm) x 0.125” (3mm). These filters can efficiently capture airborne particles, improving the indoor air quality. Their washable nature ensures they can be cleaned and reused multiple times before needing replacement.
Versatile Controls and Installation
The SHR 2005R features an external three-position (Low/Stand By/Medium) rocker switch for continuous ventilation. Fantech also offers a variety of external controls to suit different needs.
Installation is straightforward, with the unit typically hung using the installation kit provided. There are mounting bolts on the top four corners of the unit for secure placement.
Excellent Warranty Coverage
Fantech assures customers of the SHR 2005R's quality and longevity by offering a limited lifetime warranty on the aluminum core, a 7-year warranty on motors, and a 5-year warranty on parts.
Conclusion
AirGreen's commitment to delivering top-tier air exchangers is embodied in the Fantech SHR 2005R HRV. Its remarkable features and robust performance make it an excellent investment for large residential projects seeking enhanced air quality and superior energy efficiency. Contact us today to learn more about this product and how we can help improve your home's ventilation.