FANTECH VHR 200R Air Exchanger Greater Montreal
Is it the right size for your home?
It delivers 173 cfm net, enough to ventilate 2,000 to 3,200 sq ft. Choose your home's living area.
It's the right size.
For a 2,500 to 3,200 sq ft home, about 150 cfm of air needs to be renewed continuously. This unit delivers 173 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$58.56
Electricity per year
Less than a 100 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 63% at 73 cfm.
Airflow and efficiency: manufacturer's published data. Cost: 60 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
CertifiedENERGY STAR qualified per Fantech's sheet
Fantech states the VHR 200R meets Natural Resources Canada and US EPA efficiency guidelines for ENERGY STAR, valid for use in Canada. Its sheet gives 70% sensible recovery efficiency at 0 °C.
1.4 inFor large homes and high static pressure
Fantech aims it at larger homes that demand more efficiency, with higher airflow and static pressure. Its sheet lists net airflow up to 1.4 in: 196 cfm at 0.2 in, 101 cfm at 1.0 in and still 49 cfm at 1.4 in.
63%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 73 cfm.
DamperIt defrosts without depressurizing the house
In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.
HRVIt recovers heat, not moisture
Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.
−23 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 196 to 173 cfm. Most spec sheets show only the first number, precisely because it looks better.
60 WMeasured at the airflow it actually runs at
Its 70% at 0 °C is measured at 73 cfm, the continuous airflow of a typical home. At that setting it draws 60 W, or about 526 kWh a year.
LifetimeThe core warranty
The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years. We register the warranty in your name at commissioning.
6 inWhat it needs on site
6 in (oval) ducts, top connection and a condensate drain. It weighs 66 lb, and it needs enough clearance to slide the core out once a year.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 196 cfm
- Net airflow at 0.4 in. w.g.
- 173 cfm
- SRE at 0 °C (73 cfm)
- 70%
- SRE at −25 °C (73 cfm)
- 63%
- ASE at 0 °C
- 75%
- Power draw
- 60 W
- Efficacy
- 1.2 cfm/W
- Type
- HRV
- Connection
- Top ports
- Duct collars
- 6 in (oval)
- Condensate drain
- Required
- Defrost cycle
- Recirculation (motorized damper)
- Filters
- 2 washable electrostatic panel filters (11.75 × 15 in)
- Dimensions (L × D × H)
- 28 × 17 × 20.5 in
- Weight
- 66 lb
- Power supply
- 120 V
- Warranty — core
- Lifetime
- Warranty — motors
- 7 years
- Warranty — parts
- 5 years
Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 60 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
The Fantech VHR 200R Air Exchanger: Superior Ventilation for Your Home
AirGreen, a distinguished HVAC company based in Montreal, takes pride in offering the best products in air quality control. We specialize in the sale and installation of air exchangers, ensuring that the air in your home remains fresh and clean all year round. One of our flagship offerings is the Fantech VHR 200R Air Exchanger, a revolutionary Heat Recovery Ventilator (HRV) designed to deliver high performance while maintaining optimum energy efficiency. Here, we delve deep into the features and specifications that make this product a top choice for many homeowners.
The Fantech VHR 200R: A Blend of High Efficiency and Advanced Technology
The Fantech VHR 200R is a full-featured HRV designed for larger residential projects. Notably, it has been created to accommodate higher static pressure and higher airflow applications. Engineered with forward-thinking technology, it employs a recirculation defrost mechanism allowing the HRV to be functional all year long. Let's take a closer look at the specifics that make this system a remarkable addition to any home.
Exquisite Features for Optimum Functionality
- Backward Curved Blade Fans: The system utilizes two factory-balanced fans with backward curved blades. These fans not only ensure smooth airflow but also feature motors with permanently lubricated, sealed ball-bearings guaranteeing long life and maintenance-free operation.
- Aluminum Heat Recovery Core: An essential component of the VHR 200R is its aluminum heat recovery core. Configured for efficient cross-flow ventilation, this core measures 12" x 12" with a 15" depth. Its manufacture is robust enough to withstand extreme temperature variations, ensuring its durability over time.
- Removable Screw Terminal: This air exchanger is designed with a removable screw terminal that ensures easy connection, enhancing the overall convenience of installation and usage.
- Multiple Speed Operation: This feature allows you to control the speed of air exchange, allowing for energy efficiency and customized usage according to your specific needs.
- Internal Recirculation Defrost: The system incorporates an internal recirculation defrost mechanism, a unique and quiet feature that prevents your home from depressurizing during the defrost cycle. When the outdoor temperature falls below 23°F (-5°C), a preset defrost sequence activates and automatically adjusts based on operating conditions. The fan speed also adjusts automatically, providing a smooth and quiet transition between ventilation and defrost mode.
- Optional Controls: The VHR 200R can be tailored to your needs with optional controls like Eco-Touch™ - a programmable touch screen wall control, EDF7 - an electronic multi-function dehumidistat, EDF1R - a multi-function dehumidistat, and RTS2 or RTS5 - timers offering over-ride options for 20, 40, and 60 minutes.
Detailed Specifications: Delivering Powerful Performance
- Duct size: The system accommodates a 6˝ (153 mm) oval duct size.
- Weight: The unit, including the core, weighs 66 lbs (30 kg).
- Voltage/Phase: It operates at a voltage and phase of 120/1.
- Power rating: The rated power of the VHR 200R is 187 W.
- Ampere: The system requires 1.4 A.
- Average airflow: The average airflow is 173 cfm (82 L/s) at 0.4” Ps (100Pa).
User-Friendly Design and Maintenance
The Fantech VHR 200R is crafted to provide easy access to core components like the filters, fans, drain pan, and electrical panel through an access panel. With a clearance of 17” (432mm), the core slides out conveniently for service or cleaning.
Solid Build for Enhanced Durability
The casing of the VHR 200R is made of 24 gauge galvanized pre-painted steel, offering superior corrosion resistance. The cabinet is fully insulated with 1” (25 mm) high-density expanded polystyrene, ensuring heat retention and energy efficiency. The system includes two washable electrostatic panel-type air filters for the exhaust air. The dimensions of these filters are 11.75” x 15” x 0.125”.
Reliable Warranty for Peace of Mind
When you choose the VHR 200R, you're backed by Fantech's strong warranty: a limited lifetime on the aluminum core, 7 years on motors, and 5 years on parts.
The VHR 200R: A Commitment to Health and Comfort
Overall, the Fantech VHR 200R Air Exchanger is more than just an air exchanger - it's an investment in health, comfort, and well-being. Its superior performance in maintaining indoor air quality, coupled with energy-efficient operation and easy maintenance, make it an ideal choice for homeowners seeking a long-term solution for ventilation. Choose AirGreen for your HVAC needs and enjoy the benefits of clean, fresh air throughout your home, all year round.