GreenTek PROFILE P 0.7E Air Exchanger Greater Montreal
Is it the right size for your home?
It delivers 70 cfm net, enough to ventilate 800 to 1,300 sq ft. Choose your home's living area.
It's the right size.
For a 900 to 1,500 sq ft home, about 63 cfm of air needs to be renewed continuously. This unit delivers 70 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$39.04
Electricity per year
Less than a 60 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Below the Code threshold for a new home. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 34% at 59 cfm. The requirement applies to new buildings and major renovations: for a replacement, talk to us about your project before choosing.
Airflow and efficiency at 0 °C and −25 °C: HVI directory, Section III. Cost: 40 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
9.75 inGreentek's most compact ERV: 9.75 in high
Greentek describes it as the smallest and most compact ERV in its line: 18.5 × 19.5 in and 9.75 in high, or 10.4 in installed. It is meant for condos and apartments with no mechanical room, installed above a false ceiling.
−10 °CFrost prevention starts only at −10 °C (14 °F)
The energy recovery core is freeze tolerant, so frost prevention only starts at −10 °C (14 °F) or colder. The supply fan then stops and the exhaust fan runs at high speed before the unit resumes normal operation.
34%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 59 cfm.
ExhaustIt defrosts by pausing the fresh air for a few minutes
In cold weather, the supply fan stops for a few minutes while the exhaust keeps running, so warm indoor air thaws the core. During the cycle the house is briefly under negative pressure; if you have a fireplace or a naturally vented combustion appliance, mention it to our estimator.
ERVIt moves moisture too, not just heat
An ERV transfers some moisture between the two airstreams. Useful in a house that gets too dry in winter or takes on a lot of humidity in summer. The trade-off: it generally recovers less heat than a comparable HRV.
2005263Its HVI certification number
Listed in Section III of the Home Ventilating Institute's certified products directory. Anyone can check it, and it's the first condition for the Rénoclimat grant.
−13 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 83 to 70 cfm. Most spec sheets show only the first number, precisely because it looks better.
40 WMeasured at the airflow it actually runs at
Its 70% at 0 °C is certified at 51 cfm, the continuous airflow of a typical home. At that setting it draws 40 W, or about 350 kWh a year.
5 yearsThe core warranty
The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years. We register the warranty in your name at commissioning.
4 inWhat it needs on site
4 in ducts, side connection. It weighs 32 lb, and it needs enough clearance to slide the core out once a year.
Rénoclimat: $500 to install or replace an HRV or ERV
First condition met: HVI Section III certified, No. 2005263. Second: your EnerGuide rating must improve between the two evaluations. Québec warns that an air exchanger installed on its own can increase a home's energy use; that's why we balance it to the calculated airflow rather than running it at full speed.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 83 cfm
- Net airflow at 0.4 in. w.g.
- 70 cfm
- SRE at 0 °C (51 cfm)
- 70%
- SRE at −25 °C (59 cfm)
- 34%
- Power draw
- 40 W
- Efficacy
- 1.3 cfm/W
- Type
- ERV
- Connection
- Side ports
- Duct collars
- 4 in
- Defrost cycle
- Exhaust only (supply fan off)
- Filters
- 2 washable electrostatic panel filters (8.5 × 8 in)
- Dimensions (L × D × H)
- 19.63 × 18.5 × 9.75 in
- Weight
- 32 lb
- Power supply
- 120 V
- HVI certification (Section III)
- 2005263
- Warranty — core
- 5 years
- Warranty — motors
- 7 years
- Warranty — parts
- 5 years
Net airflow, efficiency at 0 °C and −25 °C, and power draw: Home Ventilating Institute certified products directory, Section III (HVID 2005263). Annual consumption calculated at 40 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
Innovation in Ventilation: The GreenTek PROFILE P 0.7E
AirGreen is delighted to introduce the latest addition to our collection of high-end air exchangers: the GreenTek PROFILE P 0.7E. This system combines cutting-edge technology and superior efficiency to deliver exceptional air quality in your multi-family residential building, all while minimizing heat loss.
Comprehensive Installation and Distribution Services throughout Greater Montreal
Drawing from our experience and expertise, we offer installation and distribution services across Greater Montreal, including Laval, Longueuil, the South Shore and the North Shore. Our team of qualified professionals is committed to ensuring a professional and efficient installation of your GreenTek PROFILE P 0.7E, with unparalleled technical support to ensure long-term optimal operation.
Designed for Multi-family Residential Buildings
The PROFILE P 0.7E is specifically designed for multi-family residential buildings. Thanks to its slim casing, it fits perfectly in smaller spaces where space is limited, such as behind a drop ceiling or in a small closet. The PROFILE P 0.7E demonstrates that even in the tightest spaces, superior ventilation is possible.
Compact Design for Flexible Installation
With an installed depth of just 10.4 inches (264 mm), the PROFILE P 0.7E is designed to fit into the tightest spaces. Its installation can be easily carried out either on the ceiling or on the wall thanks to the included mounting bracket. This air exchanger is a perfect example of how efficiency and performance should not be compromised by size.
Lateral Connection for Increased Adaptability
The side design of the PROFILE P 0.7E allows it to adapt to applications that require flexibility. This means that no matter the configuration of your space, you can be sure that the PROFILE P 0.7E will be able to integrate.
Cross-flow Core for Superior Performance
The PROFILE P 0.7E uses a cross-flow core to deliver superior performance, transferring the heat and humidity from the incoming air to the outgoing air. This means that even during the coldest months, you can be sure that your air will be both warm and humid, thus enhancing the comfort of your building.
Defrost Cycle for Winter
Designed for Canadian climates, the PROFILE P 0.7E is equipped with an automatic defrost mechanism that activates when the outside air temperature drops to -5°C (23°F) or less. This ensures that your ventilation system will continue to operate efficiently, even during the coldest months.
EHC 2.0, Multifunctional Control
The EHC 2.0 controls enable the HRV to be activated on three possible operating modes: ECONO mode for economical use, 20 Min/h mode for intermittent ventilation, and Continuous Ventilation mode for constant air renewal.
Additional Features for Optimal Performance and Maintenance
The PROFILE P 0.7E includes several other features that make it the ultimate choice for ventilation:
- No drain required.
- Washable electrostatic filters for superior air quality.
- Multiple speed operation to meet your specific needs.
- Lightweight design for easy installation.
- Removable screw terminal for easy connection with external access.
- MERV 3 filters for optimal air quality.
- Energy transfer of up to 75% for increased energy efficiency.
- Simple and robust frost prevention system for optimal winter performance.
- Eco-friendly motors for environmentally friendly use.
- Certified by HVI, cCSAus, and ENERGY STAR for its performance and efficiency.
- Horizontal approval for flexible installation.
- PCM of 70 for optimal performance.
In summary
The GreenTek PROFILE P 0.7E is the ultimate solution for efficient and economical ventilation. It combines a compact design and superior performance to deliver exceptional air quality, while maximizing energy efficiency.