Air Exchanger VENMAR AVS® K8 SERIES 44152 Greater Montreal

In stock
SKU: 44152
71 cfm net800 to 1,300 sq ft60% at −25 °C
Talk to an HVAC technician · 514 316-2973
Meets the Québec CodeLifetime core warranty
01 · Your home

Is it the right size for your home?

It delivers 71 cfm net, enough to ventilate 800 to 1,300 sq ft. Choose your home's living area.

It's the right size.

For a 900 to 1,500 sq ft home, about 63 cfm of air needs to be renewed continuously. This unit delivers 71 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.

Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.

02 · Performance

What it does, in numbers

Heat recovery
60%
At −25 °CCode: 54% minimum
66%
At 0 °CMeasured at 47 cfm
Net airflowThe ducts cost it 8 cfm
0.2 in · test bench79 cfm
0.4 in · with ducts71 cfm

$38.07

Electricity per year

Less than a 60 W light bulb

Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.

39W
Running continuously
342kWh
Per year
3months
Filter cleaning

Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 60% at 48 cfm.

Airflow and efficiency: manufacturer's published data. Cost: 39 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).

03 · Good to know

What you should know about this one

Published, verifiable facts, not brochure claims.

ClosetFits in a closet or above a water heater

This compact cube targets condos and apartments needing up to 71 cfm of continuous ventilation. With its 4 in ports on top, it installs in a closet or a mechanical room, above the hot water tank.

1 motorOne PSC motor drives both airstreams

A single permanently lubricated PSC motor handles both the fresh air supply and the stale air exhaust. Electrical rating: 120 V, 0.5 A and 60 W.

60%What it still recovers at −25 °C

The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 48 cfm.

DamperIt defrosts without depressurizing the house

In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.

HRVIt recovers heat, not moisture

Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.

−8 cfmWhat the ducts cost it

Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 79 to 71 cfm. Most spec sheets show only the first number, precisely because it looks better.

39 WMeasured at the airflow it actually runs at

Its 66% at 0 °C is measured at 47 cfm, the continuous airflow of a typical home. At that setting it draws 39 W, or about 342 kWh a year.

LifetimeThe core warranty

The core does the work and is the most expensive part to replace. Motors and parts: 5 years. We register the warranty in your name at commissioning.

4 inWhat it needs on site

4 in ducts, top connection and a condensate drain. It weighs 30 lb, and it needs enough clearance to slide the core out once a year.

04 · Installation

What it needs on site

4 in ductsCollar diameter
Top connectionTop ports
Condensate drainRequired
30 lbUnit weight
15.63 × 15.44 × 18.63 inLength × depth × height
120 VPower supply

In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.

Complete spec sheetData and cited sources
Net airflow at 0.2 in. w.g.
79 cfm
Net airflow at 0.4 in. w.g.
71 cfm
SRE at 0 °C (47 cfm)
66%
SRE at −25 °C (48 cfm)
60%
ASE at 0 °C
76%
Power draw
39 W
Efficacy
1.2 cfm/W
Type
HRV
Connection
Top ports
Duct collars
4 in
Condensate drain
Required
Defrost cycle
Recirculation (motorized damper)
Filters
2 washable 30 ppi foam filters (9.2 × 5.75 × 0.38 in)
Dimensions (L × D × H)
15.63 × 15.44 × 18.63 in
Weight
30 lb
Power supply
120 V
Warranty — core
Lifetime
Warranty — motors
5 years
Warranty — parts
5 years

Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 39 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.

05 · In the same family

The next model down and up

Venmar AVS K8 44152You are here800 to 1,300 sq ft71 cfm
Venmar AVS K10 44500Larger1,000 to 1,600 sq ft89 cfm

Talk to an HVAC technician before you choose

We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.

Introducing the Venmar AVS® K Series™ HRV 79 CFM 66% SRE K8 44152

Welcome to AirGreen, your trusted HVAC partner based in Montreal. We're proud to offer HVAC sales and installation services all throughout Greater Montreal, Laval, Longueuil, South Shore, and North Shore. One of our key offerings, highlighted on our website, is the Venmar Air Exchangers. Among these exceptional products is the VENMAR AVS® K SERIES™ HRV 79 CFM 66% SRE K8 44152.

The Venmar AVS® K Series™ HRV 79 CFM 66% SRE K8 44152 is your ultimate solution for fresh air in limited spaces. Designed with condominiums, apartments, and compact spaces in mind, this air exchanger can deliver up to 71 CFM of continuous ventilation. Despite its power, it's conveniently compact with 4-inch vertical or horizontal ports, which allows installation even in confined spaces such as a closet or above a hot water tank.

Key Features

  • Easy Installation: Weighing just 30 lbs (13.6 kg), the K8 HRV can be installed without the need to open the unit. It features pressure taps, balancing dampers, integrated hooks, and port straps to simplify installation. The removable terminal block also allows for quicker wall control connections.
  • One-Blower System: Unique to the K8 HRV is its patent-pending one-blower system, which reduces noise and ensures a quieter operation than other similar HRVs on the market.
  • Convenience: The K8 HRV comes with a 5-year parts-only warranty. In addition, the heat recovery core is covered by a limited lifetime warranty, provided you have the original proof of purchase.

VENMAR AVS® K SERIES™ HRV 79 CFM 66% SRE K8 44152: The Cube of Perfection

With the K8 HRV, perfection comes in a cube. Its compact size, combined with 4-inch vertical ports, makes it the ideal choice for small spaces, providing up to 71 CFM of continuous ventilation. Despite its size, it's designed for high performance and features unique additions like pressure taps, balancing dampers, integrated hooks, and port straps to simplify installation.

Maintenance and Repairs

All parts of the K8 HRV that could require maintenance can be removed in less than five minutes, allowing for easy and direct access for repairs. The PSC motor is permanently lubricated, reducing the need for continual maintenance.

Warranty

The K8 HRV is protected by a 5-year warranty on parts only. The heat recovery core is covered by a limited lifetime warranty, with the original proof of purchase required for warranty service.

Controls

The K8 HRV is straightforward and user-friendly. Once installed, simply press its push-button located on the top left side of the unit to select high speed, low speed, or stop. The LED located under the push button will indicate which mode the unit is in. For more convenience, the unit can also be controlled by an optional main control.

Options

The K8 HRV offers a complete line of registers and diffusers and an electrical duct heater. It is also compatible with the exclusive wall mounting bracket (no. 19255).

Heat Recovery Core

The K8 HRV features a heat recovery core that measures 10” x 10” x 5.5” and weighs only 4 lbs. This crossflow core is made of polypropylene, offering durability and efficient heat transfer. The heat recovery core comes with a limited lifetime warranty.

Requirements and Standards

The K8 HRV complies with several important requirements and standards. It meets UL 1812 requirements for heat recovery ventilators, CSA C22.2 no. 113 standard applicable to ventilators, and CSA F326 requirements for the installation of heat recovery ventilators. The unit's performance has been tested according to CSA C439 Standards and is HVI certified.

At AirGreen, our commitment to our customers is unyielding. We strive to offer a vast range of HVAC products that are designed with your comfort and well-being in mind. For an unmatched HVAC experience, choose AirGreen.