Installation of a Sharp TU Wall-Mounted Heat Pump in Terrebonne, North Shore
Dive into AirGreen’s latest installation story in Terrebonne, where the Sharp TU Wall-Mounted Heat Pump brings a breath of fresh, purified air into a cozy open-space home!
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Revolutionizing Comfort: A Tale of Precision & Purity
A Breath of Fresh Air in Terrebonne
Nestled in the serene locale of Terrebonne, North Shore, our latest installation story unfolds. AirGreen, your trusted HVAC partner in Montreal, Laval, Longueuil, North Shore, and South Shore, recently had the pleasure of enhancing the indoor atmosphere of a home with the Sharp TU Wall-Mounted Heat Pump.
Why Sharp TU? The Unveiling
The Sharp TU isn’t just another heat pump; it’s a guardian of comfort and health. With a cooling capacity of 18,000 BTU and a heating capacity that remains steadfast at -20°C, this model is a powerhouse in a sleek package. The customer sought a solution that would not only provide optimal temperature control but also address the common open-space dilemma: lingering cooking odors.
Plasmacluster: Nature’s Genius, Bottled
- Eliminates airborne viruses
- Removes mold and airborne microbes
- Neutralizes odors and tobacco residue
- Combats airborne allergens
- Dissolves stubborn household smells
Sharp TU boasts Plasmacluster technology, a unique feature mimicking nature’s air purification process. This technology is exclusive to Sharp, providing an unparalleled air purification experience that actively neutralizes bacteria, viruses, and various contaminants, ensuring a home environment that's as healthy as it is comfortable.
Coanda Airflow: The Art of Gentle Breeze
The Sharp TU doesn’t just throw air around; it crafts the airflow with precision, thanks to the Coanda Airflow Control. This technology ensures a gentle and even distribution of air, preventing the discomfort of direct cold or hot air blasts while facilitating the flow of purified air to every nook and cranny of your living space.
Installation Chronicles: Simplicity Meets Excellence
Our team at AirGreen approached this installation with a commitment to simplicity and excellence. The head unit found its place on one side of the wall, with the compressor conveniently located on the opposite side. This strategic placement was not just about aesthetics; it was a calculated move to ensure efficient operation and easy maintenance for the homeowner.
A Symphony of Technologies
With the Plasmacluster and Coanda technologies working in harmony, the Sharp TU guarantees a living space where comfort meets health. Whether you are in the kitchen or the living room, expect a consistent temperature, free from unwanted odors and airborne threats.
Warranty & Assurance
With a 10-10-10 warranty (Compressor - Parts - Labor) and an included extended warranty, the Sharp TU installation offers peace of mind alongside premium performance. The unit operates quietly, with a sound pressure level ranging from 24 to 53 dB(A), making it a silent guardian of your indoor climate.
Choose AirGreen: Where Technology Meets Trust
At AirGreen, we take pride in offering HVAC solutions that stand the test of time and expectation. Our installation in Terrebonne is a testament to our commitment to bringing you products and services that not only meet but exceed your expectations. With a focus on technology, trust, and customer satisfaction, we invite you to experience the AirGreen difference.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).