-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
Packaged heat pump: all the comfort in one box, sitting on your roof.
A single outdoor unit heats, cools and moves the air through the whole building. No refrigerant lines inside your walls. We install 139 models from 8 brands, from 2 to 12.5 tons, with a free in-home estimate.
In winter, the unit captures heat from the outdoor air, even cold, and pushes it through the ducts to every floor.
Which packaged heat pump for your building?
Three clicks: your building, its size and what matters most. The size in tons and the matching series from our catalogue show up right away.

ENERGY STAR cold climate, heating down to -30 °C per the spec sheet.
See the 10 models
ENERGY STAR from 3 to 5 tons per our sheets.
See the 6 models
All six sizes are ENERGY STAR certified per our sheets.
See the 6 modelsKey point: starting point of 18,000 BTU/h per 1,000 sq ft, then we confirm at the visit based on insulation and windows.
What is a packaged heat pump, and how is it different from a central split system?
A packaged heat pump puts in one outdoor unit everything a central split system spreads over two. Switch views to see what disappears from the basement.
- One unit, outside: roof, ground pad or commercial roof.
- No refrigerant lines inside the building.
- Nothing in the basement: the space stays yours.
- Ducts come in through the roof or the wall.
| Criterion | Packaged | Central split | Wall-mounted (ductless mini-split) |
|---|---|---|---|
| Units | One, outside | Two: outside + inside | One outside + one or more heads |
| Refrigerant inside the home | None | Two lines to the indoor unit | Lines to each head |
| Space used indoors | None | Coil or furnace | Wall heads |
| Ducts | Yes, whole building | Yes, whole building | No |
| Typical location | Flat plex roof, ground pad, commercial roof | House with a basement | Room by room |
| LogisVert (guide 1.10) | Not named | Named (split) | Named (mini-split) |
| AirGreen catalogue | 139 packaged units | Central heat pumps | Wall-mounted heat pumps |
Key point: a packaged unit keeps the refrigerant outside and frees up the basement; it needs ductwork.
Open the box: seven parts, one unit.
Tap the numbers. Switch seasons: the refrigerant reverses and the same unit goes from heating to cooling.
Each number on the cutaway opens the part and explains what it does. Switch seasons to see the refrigerant change direction.
Heating: the outdoor coil captures heat outside, the compressor concentrates it, the indoor coil gives it to the home’s air.
Each number on the cutaway opens the part and explains what it does. Switch seasons to see the refrigerant change direction.
Heating: the outdoor coil captures heat outside, the compressor concentrates it, the indoor coil gives it to the home’s air.
Eight brands, 139 packaged units, from 2 to 12.5 tons.
Daikin, York, Trane, Goodman, Lennox, Gree, Tosot and Kinghome: filter, open a card, then the brand’s collection.

Key point: the widest choice is at Daikin (48) and York (43); the only ENERGY STAR cold-climate units are the Gree, Tosot and Kinghome Rooftop R32.
Which brand is the most efficient?
On our spec sheets, the Gree, Tosot and Kinghome Rooftop R32 have the highest SEER (18.0). Compare all eight brands on the same scale, then in the full table.
Each bar runs from the brand’s least efficient model to its most efficient. The further right, the better.
| Brand | Models | Series | Sizes | SEER | HSPF | Refrigerant | ENERGY STAR |
|---|---|---|---|---|---|---|---|
| Daikin | 48 | DP16HM · DP16HH · DP5HH · DP5HM · DP14HH · DP14HM · DP3HH · DP3HM | 2 to 5 tons | 14.0 to 16.0 | 8.0 to 8.3 | R-410A | 4 DP16HM models (3, 3.5, 4 and 5 tons) |
| York | 43 | PH3 · PHE4 · Sunline WN/XN · Sun Core · Sun Pro WP/XP | 2 to 12.5 tons | 13.4 to 14.3 | 6.7 to 8.0 | R-454B and R-410A | None on our sheets |
| Trane | 16 | XL15c · XR13-4H · XR13-4C | 2 to 5 tons | 14.0 to 16.0 | 8.0 to 8.4 | R-410A | All 6 XL15c |
| Goodman | 12 | 16 SEER vertical · 16 SEER horizontal | 2 to 5 tons | 15.5 to 16.0 | 8.0 to 8.2 | R-410A | 3 models (3, 3.5 and 4 tons) |
| Lennox | 10 | LRP14HP · LRP16HP | 2 to 5 tons | 14.0 to 16.0 | 8.0 to 8.2 | R-410A | None on our sheets |
| Gree | 4 | Rooftop R32 | 2, 3, 4 and 5 tons | 18.0 | 8.3 to 8.8 | R-32 | All 4, cold climate |
| Tosot | 4 | Rooftop R32 | 2, 3, 4 and 5 tons | 18.0 | 8.3 to 8.8 | R-32 | All 4, cold climate |
| Kinghome | 2 | Rooftop R32 | 3 and 5 tons | 18.0 | 8.3 to 8.5 | R-32 | Both, cold climate |
Which brand is the most efficient?
On our spec sheets, the Gree, Tosot and Kinghome Rooftop R32 have the highest SEER (18.0). Compare all eight brands on the same scale, then in the full table.
Each bar runs from the brand’s least efficient model to its most efficient. The further right, the better.
| Brand | SEER | Refrigerant |
|---|---|---|
| Daikin 48 models · 2 to 5 tons | 14.0 to 16.0 | R-410A |
| York 43 models · 2 to 12.5 tons | 13.4 to 14.3 | R-454B and R-410A |
| Trane 16 models · 2 to 5 tons | 14.0 to 16.0 | R-410A |
| Goodman 12 models · 2 to 5 tons | 15.5 to 16.0 | R-410A |
| Lennox 10 models · 2 to 5 tons | 14.0 to 16.0 | R-410A |
| Gree 4 models · 2, 3, 4 and 5 tons | 18.0 | R-32 |
| Tosot 4 models · 2, 3, 4 and 5 tons | 18.0 | R-32 |
| Kinghome 2 models · 3 and 5 tons | 18.0 | R-32 |
Does a packaged heat pump heat in the dead of winter?
Yes: the Rooftop R32 heats down to -30 °C per its spec sheet, and the 3-ton still delivers 21,800 BTU/h at -8.3 °C. Drop the temperature to see.
At -8.3 °C, the certified rating of the 3 ton unit still delivers 21,800 BTU/h. Milder than that, it delivers more.
Key point: at -8 °C, a cold-climate central split keeps more power; the packaged unit keeps everything outside.
On the roof, on the ground or on a commercial building: each spot has its rules.
A packaged unit lives outside. Here is what that changes, and what your city may require: 56 of the 194 municipalities in our directory ask for a permit.
The Montréal classic. The unit is lifted onto the roof and the ducts run down through the building. Nothing on the ground, nothing in the yard, nothing in the units.
- Lifting, often by crane
- Roof support and waterproofing
- Longueuil and Repentigny: unit hidden from the street
- Plateau-Mont-Royal: visible unit = urban planning advisory committee
- Verdun: metal screen
Do you need an air exchanger with a packaged unit?
The packaged unit heats and cools the air; the air exchanger renews it. Two questions to see whether an HRV or an ERV suits you, and 256 exchangers from 7 brands.
An HRV recovers heat from stale air to warm the fresh air coming in. It does not exchange humidity: it helps remove excess moisture in winter, like condensation on windows.
The packaged unit heats, cools and moves the air. The exchanger renews it. Both share the same ducts, and the same team connects them (RBQ 15.8 Ventilation).
Does a packaged heat pump qualify for LogisVert?
The LogisVert guide in force (version 1.10, September 15, 2026) names split and mini-split systems, not packaged units. Here is the gap, size by size.
- Everything outside, on the roof or on the ground
- No refrigerant lines inside the home
- Packaged units not in the LogisVert guide 1.10
- Outdoor unit + indoor unit (coil or furnace)
- Refrigerant lines between the two
- 33,000 ÷ 1,000 × $120 = $3,960, max. 100% of cost
Honestly: the LogisVert guide v1.10 (September 15, 2026) names split and mini-split systems, not packaged units. If the rebate weighs in your decision, we price both options at the visit. Apply to Hydro-Québec no later than 9 months after installation. LogisVert simulator
Key point: if the rebate matters in your choice, we price both options at the visit.
R-410A, R-454B or R-32: which refrigerant is in your packaged unit?
Three refrigerants in our catalogue, two of them next-generation with a GWP three to four times lower. Tap one to compare.
York’s chosen replacement. The lowest GWP of the three. A2L-rated, mildly flammable: handled by a trained technician.
How does a packaged heat pump installation go?
Six steps, one team, and a written final offer before the first bolt. Get ready for the visit by ticking the list.
A technician looks at the roof or the ground spot, the ducts and the electrical panel. Nothing to sign.
With these photos, the technician arrives prepared: the right roof support, the right electrical supply, the right connections.
Five questions to see what you remember.
One answer per question; the explanation shows right away.
5 questions left
5 questions left
Your questions about packaged heat pumps
Search a word: permit, refrigerant, rebate, price…
A single outdoor unit that holds everything: compressor, two coils, fan and blower. It connects to the home’s ductwork. No refrigerant line enters the building.
One roof, one plan, one price. Before the first bolt.
One visit, one written offer, installation and after-sales service by the same team. The in-home estimate is free.
One roof, one plan, one price. Before the first bolt.
One visit, one written offer, installation and after-sales service by the same team. The in-home estimate is free.
- AirGreen catalogue, Shopify product sheets (139 packaged units, 256 air exchangers), read on September 30, 2026.
- Hydro-Québec, LogisVert, Participation guide, residential customers, version 1.10 of September 15, 2026.
- Gree, Tosot and Kinghome Rooftop R32 sheets (AHRI 216763049, 215866830, 216763053, 215866831) and Midea EVOX G3 (AHRI 215471340, 215471343, 215471344, 215471345).
- GWP (IPCC AR4) published by manufacturers: Johnson Controls (York), R-454B white paper, August 2023; Lennox and LG for R-32 and R-410A.
- AirGreen, Permits and regulations (194 municipalities), checked on September 30, 2026.






