Une réparation complexe de thermopompe murale Fujitsu à Sainte-Julie sous un balcon restreint
Reading time: 4'

A Complex Heat Pump Repair for Fujitsu Wall-Mounted Unit in Sainte-Julie Under a Restricted Balcony

Specialized AirGreen Intervention in a Difficult-to-Access Space

At AirGreen, our reputation is based not only on the quality of our installations but also on our ability to respond effectively in complex situations. Recently, we were called for a service call in Sainte-Julie concerning a Fujitsu wall-mounted heat pump installed under a closed balcony, with very limited space to work. This situation presented a logistical and technical challenge that our team was able to handle with precision and expertise.

Initial Assessment of the Situation on Site

When our team arrived at the residence in Sainte-Julie, they immediately noticed several key elements:

  • A Fujitsu wall-mounted outdoor unit installed high up, fixed to a concrete block wall, under a balcony with minimal clearance.

  • Exposed wiring and partially disorganized cables, including electrical wires and refrigerant lines that appeared to be affected by time.

  • Wall-mounted circuit breaker box located in a hard-to-reach corner, suggesting a connection that needed checking.

  • Decorative hanging light bulbs near the unit, which, although aesthetic, presented a potential risk of interference with the unit's ventilation.

Our technician performed a complete evaluation of the Fujitsu heat pump's operation. Although the unit started up, it was producing abnormal noise outside, and the indoor temperature was not lowering adequately. Everything pointed to a refrigeration or ventilation issue affecting the overall system efficiency.

In-Depth Technical Diagnostics

Our certified technicians then carried out the following steps:

  1. Checking the R-410A refrigerant pressure – The results were slightly below the recommended standards, which suggested a slow leak.

  2. Inspecting the electrical connections – One of the power cables was slightly corroded at the entry to the wall box, possibly due to moisture infiltration.

  3. Examining the outdoor fan – The protective grille contained small obstructions (dust, leaves) that were hindering hot air expulsion.

  4. Reviewing the metal support bracket – While still solid, we found that the upper bolts showed signs of surface rust.

Solutions Applied by Our AirGreen Team

To restore this Fujitsu wall-mounted heat pump to full functionality, we implemented a series of targeted and safe actions:

  • Thorough cleaning of the outdoor ventilation grille using a low-pressure jet and biodegradable cleaner.

  • Resealing and rust treatment of the support brackets to ensure the installation's longevity.

  • Partial replacement of the power wiring with new connectors, certified for outdoor use.

  • Leak testing using an electronic detector, followed by a controlled addition of R-410A refrigerant to restore the system’s ideal pressure.

  • Slight repositioning of the hanging decorative cables, as requested by the customer, to prevent them from interfering with air circulation or coming into contact with the fan.

Final Outcome: Fully Functional Heat Pump and Satisfied Customer

At the end of the intervention, the Fujitsu heat pump was working perfectly. The outdoor unit was running quietly, and the indoor module was effectively distributing cool air. The customer immediately noticed a significant improvement in comfort throughout the home.

We also recommended annual preventive maintenance, especially due to the partially enclosed environment under the balcony, to ensure the system operates efficiently in the long run.

Key Takeaways from This Wall-Mounted Heat Pump Repair in Sainte-Julie

  • The importance of accessibility: Installation under a balcony can complicate maintenance and increase the risk of premature wear. At AirGreen, we adapt our methods to every configuration.

  • The impact of the external environment: Humidity, debris, and poorly protected wiring can significantly affect the performance of outdoor units.

  • AirGreen’s expertise: Our technicians have the tools, training, and experience needed to diagnose problems quickly, even in atypical situations.

Our Interventions on the South Shore: Quality, Safety, and Efficiency

This repair performed in Sainte-Julie, on the South Shore, perfectly illustrates our commitment to providing quick, reliable, and long-lasting service. Whether you're in Longueuil, Brossard, Saint-Bruno, or Saint-Lambert, our team provides the same level of technical excellence everywhere.

At AirGreen, every service call is handled with care because we know that a functioning HVAC system is crucial for your comfort. We don’t compromise on safety, durability, or quality in our repairs.

Why Choose AirGreen for Your Fujitsu Wall-Mounted Heat Pump Repairs?

  • Fast interventions throughout Montreal, Laval, North Shore, and South Shore.

  • Technicians specifically trained on brands like Fujitsu, Gree, Mitsubishi, and more.

  • Personalized follow-up after every service call.

  • Use of certified parts and adherence to CSA standards.