Permits and Regulations for the Installation of Heat Pumps and Air Conditioners in Repentigny
Understanding Municipal Requirements for Your HVAC Work
At AirGreen , we know that before undertaking any heat pump or air conditioning installation work in Repentigny , it is essential to fully understand the applicable municipal regulations . These rules aim to preserve the peace and quiet of the neighborhood, the safety of homes, and the visual harmony of buildings. We have therefore gathered the most recent information here to guide you towards a compliant and hassle-free installation.
General rules in force in Repentigny
Supplementary or modular air conditioning units
In Repentigny, portable air conditioners or modular units (such as outdoor wall units) are permitted in several areas of your property, provided you follow specific rules:
-
They can be installed in front, side or back yards .
-
A minimum distance of 1.2 meters (4 feet) must be maintained between the device and property boundaries .
-
If the device is installed on the roof of the main building, it must be invisible from the street or harmoniously integrated into the architecture of the building.
-
All devices must comply with the noise standards set out in the City's noise pollution regulations .
👉 No municipal permit is required for the installation of a residential supplemental or modular air conditioning unit in Repentigny. However, it remains your responsibility to ensure that your installation complies with the distances and aesthetic requirements set out in the regulations.
Central heat pump and compressor systems (residential use)
For central heat pump systems or residential compressors , the City applies slightly different rules:
-
Installation is permitted only in side and rear yards .
-
A minimum distance of 2 meters (6 feet 7 inches) must be maintained between the device and property lines .
-
Compressors are also subject to municipal noise standards , ensuring neighborhood peace and quiet.
👉 Again, no permit is required for the installation of a residential central heat pump or compressor system, provided that the current location and noise standards are met.
Where to go for municipal confirmation or assistance
Although a permit is not required, it is always recommended to confirm your compliance before starting work, especially if your building has architectural features or if the device is to be installed in an area visible from the street.
For any questions regarding developments, renovations or HVAC work , you can contact the Urban Planning and Sustainable Development Department of the City of Repentigny:
-
Email: permis@repentigny.ca
-
Phone: 450 470-3840
-
Permit counter: accessible via the official website of the City of Repentigny .
This service can also provide you with official documents regarding noise regulations and distances to be respected according to the zoning of your property.
Concrete examples and best practices
Example 1: Single-family home in a residential area
A homeowner wants to install a wall-mounted heat pump in the side yard of their house. As long as it is located more than 2 meters from the property line and meets noise standards , no permit application is required. Installation can be done immediately after the contractor has validated compliance.
Example 2: Unit on the roof of a building
In the case of an apartment building where the installation is on the roof , the device must be concealed or integrated into the building so that it is not visible from the public highway . This requirement aims to preserve the aesthetics of the urban landscape of Repentigny.
Example 3: Proximity to neighbors
If your installation is close to a shared fence , make sure that the noise from the heat pump complies with the authorized thresholds. At AirGreen, our technicians systematically check the acoustic compliance of each device before commissioning.
Common Mistakes to Avoid
-
Installing the device too close to the property line , which could result in non-compliance.
-
Ignoring noise standards , which are often the source of neighborhood complaints.
-
Choosing a location visible from the street without adequate aesthetic integration.
-
Failing to consult the City to validate the zoning specifics before the work.
At AirGreen, we support our customers to avoid these mistakes and ensure a compliant installation from the first visit.
Your Responsibility / Our Support
Your Responsibility
It is important to note that compliance with all applicable rules, permits and regulations remains the responsibility of each client . While we at AirGreen are always available to provide guidance and advice, it is your responsibility to ensure that your project complies with local requirements and that the necessary permits have been obtained before work begins.
Unless otherwise stated in our contract, the responsibility for obtaining permits and ensuring the compliance of the installation lies with the customer.
Our Support
At AirGreen , we believe that a successful installation requires transparency and compliance . Our team is here to guide you, inform you, and support you in understanding the administrative procedures related to your HVAC project.
We help you identify applicable obligations and communicate effectively with municipal services when necessary.
If you have any questions, please don't hesitate to contact us —we're here to make your experience simple, clear, and compliant.
Next Step!
At AirGreen , we support our customers at every stage of their process for compliant, efficient and sustainable HVAC installations .
If you live in Repentigny or the surrounding area and want to install a heat pump or air conditioning system , our team is available to evaluate your project, advise you on permitted locations and offer you a turnkey installation in full compliance with municipal regulations .
📞 Contact us today at 514-316-2973 or email us at sales@airgreen.ca to obtain a free estimate and personalized support.