Mini-Split Maintenance on Nun's Island: The Key to Long-Lasting HVAC Systems
Discover how a thorough cleaning of a mini-split on Nun’s Island transformed our client’s HVAC performance. Learn why regular maintenance is essential for clean air and long-lasting efficiency.

In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A Deep Cleaning in Île-des-Sœurs — An Essential Step for a Healthy Home
At AirGreen, we are proud to offer the highest quality HVAC services throughout Montréal, Laval, Longueuil, the North Shore, and the South Shore. Recently, we took on a cleaning and maintenance project for a wall-mounted heat pump in Île-des-Sœurs. While it might seem like a simple maintenance job, it was much more than that — it was a crucial step to ensure the longevity and efficiency of our client’s HVAC system.
Why Cleaning and Maintenance Are Essential for Mini-Splits
Mini-splits, also known as wall-mounted heat pumps, are incredibly efficient at heating and cooling spaces. However, like any HVAC system, they require regular cleaning and maintenance to keep operating optimally. Dust, mold, and other particles can accumulate inside the unit, reducing not only its efficiency but also compromising indoor air quality. For residents of Île-des-Sœurs, where the natural environment presents unique challenges, this becomes especially important.
Our client contacted us after noticing that their wall-mounted heat pump was no longer performing as before. The cooling was weak, and a slight odor was emitted when the system was running. After hearing these concerns, we knew it was time for a deep cleaning.

The Cleaning Process: Behind the Scenes of Wall-Mounted Heat Pump Maintenance
For this particular job, we arrived equipped with our specialized cleaning tools and protective covers (as shown in the photo). These blue cleaning bags are an integral part of our process, ensuring that water, dirt, or debris are collected efficiently without causing a mess in our client’s home. The bag wraps snugly around the unit, providing a clean and effective way to remove all the dirt accumulated over time.
Our team carefully disassembled the wall-mounted heat pump, cleaning the evaporator coils, the drip pan, and the filters. These areas are prone to dust and bacteria buildup, which can seriously affect indoor air quality if not cleaned regularly. We also cleaned the condensate drain line to ensure water could flow properly, preventing potential leaks that could damage walls or floors.
The Benefits of a Deep Cleaning for a Mini-Split
Once the cleaning process was complete, we reassembled the unit and ran a series of tests to ensure everything was working correctly. Our client immediately noticed the difference — the cooling power was restored and the unpleasant odor was gone. This is no surprise, as regular maintenance can improve system efficiency by up to 30%. It also helps prevent potential breakdowns and extends the machine’s lifespan, making it a cost-effective investment in the long run.
But the benefits don’t stop there. A clean HVAC system also offers:
- Better air quality: By removing dust, mold, and other particles, you ensure you breathe clean, healthy air.
- Improved energy efficiency: A well-maintained unit runs more efficiently, meaning lower energy bills.
- Extended system lifespan: Regular cleaning can prolong your system’s life by several years.
- Prevention of breakdowns: Addressing issues before they become serious can save you costly repairs down the line.
An Interesting Challenge in Île-des-Sœurs
Every job presents its unique challenges, and this one was no exception. Île-des-Sœurs, or Nun's Island, is known for its modern apartments and condos, surrounded by picturesque views of the Saint Lawrence River. The proximity to water offers beautiful scenery but also brings higher humidity levels, which lead to faster dust accumulation and mold growth inside HVAC units. For this reason, we always recommend our Île-des-Sœurs clients stay vigilant about their HVAC system maintenance.
In this case, the unit was installed in a modern condo, and we had to navigate tight spaces to ensure the cleaning process went smoothly. This meant we had to be especially careful not to damage delicate internal components or create a mess in the small living area. Our experience and attention to detail paid off — everything went as planned, and the client’s home remained spotless.
What’s Next? Keeping Your Mini-Split in Perfect Condition
At AirGreen, we believe education is as important as the work itself. After completing the cleaning, we took the time to explain to our client the importance of regular maintenance for mini-splits. We recommend having your mini-split cleaned every 12 to 18 months, especially in areas like Île-des-Sœurs where environmental factors can affect HVAC systems.
Here are some tips we shared with our client to keep their system in perfect condition between professional cleanings:
- Regular filter cleaning: Mini-split filters should be cleaned monthly during heavy use seasons. Simply remove the filters and wash them with lukewarm water.
- Keep the area around the unit clean: Dust and debris can accumulate around the unit and be drawn into the system. Make sure to keep the surrounding area tidy.
- Watch for leaks: If you notice water dripping from your mini-split, it may indicate a clogged drain line or a full drip pan. Addressing this quickly can prevent major damage.
- Schedule regular professional maintenance: DIY maintenance can only go so far. Professional cleaning ensures all parts of the unit, including internal components, are thoroughly cleaned and inspected for potential issues.
Why Choose AirGreen for Your HVAC Needs?
At AirGreen, we have built our reputation on quality, reliability, and exceptional customer service. We specialize in mini-split maintenance, but our expertise extends to all types of HVAC systems, from central heat pumps to air exchangers. Our team of certified technicians is trained to handle everything from routine maintenance to complex installations, ensuring your home’s heating and cooling systems are always in top condition.
Here’s why our clients keep choosing us again and again:
- Experienced professionals: Our technicians are experts in their field, with years of experience and ongoing training.
- Superior customer service: We’re not just here to fix problems — we provide solutions that simplify your life.
- Transparent pricing: No hidden fees or surprise costs. We provide detailed quotes so you know exactly what to expect.
- A wide service area: We proudly serve Montréal, Laval, Longueuil, as well as the North Shore and South Shore.
Conclusion: A Fresh Start for Your Mini-Split
This cleaning project in Île-des-Sœurs reminded us how important regular maintenance is for wall-mounted heat pumps. Whether you’re experiencing low airflow, strange odors, or simply want your system to keep running efficiently, professional cleaning can make all the difference. At AirGreen, we are committed to helping our clients maintain comfortable and healthy homes through high-quality HVAC services.
So, if you’re looking for reliable mini-split maintenance in Montréal, Laval, Longueuil, or beyond, give us a call. We’ll make sure your system is in perfect shape, no matter the season.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
The type of unit, its age and what you have noticed: noise, smell, water, lower output.
Filters, coils or core, drain, fans, connections and clearances.
Dirty parts are cleaned following the manufacturer's recommendations.
Operation, water drainage, noise and airflow.
What was done, what to watch and when to come back.
- The appointmentThe type of unit, its age and what you have noticed: noise, smell, water, lower output.
- InspectionFilters, coils or core, drain, fans, connections and clearances.
- CleaningDirty parts are cleaned following the manufacturer's recommendations.
- ChecksOperation, water drainage, noise and airflow.
- The reportWhat was done, what to watch and when to come back.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
What people ask us about this kind of work
How often should maintenance be done?
Does maintenance improve performance?
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).
