Installation of a MIDEA EVOX G3 1.5 ton electric furnace with central Air Handler system in Verdun

A compact, clean central installation designed for stable comfort in Verdun

In Verdun, mechanical space is rarely generous. Between cramped walls, existing ducts, sometimes tight access, and the constraints specific to urban homes in Montreal, each HVAC installation requires a precise reading of the building before even touching the equipment. For this project, our AirGreen team installed a MIDEA EVOX G3 1.5 ton electric furnace, configured as a central system with Air Handler, in a narrow technical space where every connection had to be executed with care.

The project photo clearly illustrates the desired result: a dense but orderly installation, with clean integration between the electric furnace, the central indoor unit, the ducts, drainage, refrigerant connections, and electrical power. This type of project is particularly common in areas such as Verdun, LaSalle, Le Sud-Ouest, Rosemont, Laval, Longueuil, the North Shore, and the South Shore, where homeowners want to modernize their heating and air conditioning without rebuilding the entire duct network.

Why a MIDEA EVOX G3 1.5 ton electric furnace was suitable for this project

The choice of a MIDEA EVOX G3 1.5 ton responded to a very specific reality: to offer a high-performance, quiet, and well-integrated central system while respecting the physical limitations of the mechanical room. In this type of configuration, the electric furnace and Air Handler become the heart of indoor comfort. Air is distributed through existing ducts, allowing multiple rooms to be heated and cooled from a single central system.

For a property in Verdun, this approach offers several concrete advantages:

• more uniform air distribution than with several independent appliances;
• a more discreet aesthetic, without visible wall units in the main rooms;
• better compatibility with homes and condos already equipped with ducts;
• a suitable solution for homeowners who want to modernize their central heating without multiplying visible equipment;
• a solid technical foundation to combine comfort, energy efficiency, and simplified maintenance.

In this project, the 1.5 ton capacity was consistent with the building's needs, taking into account the volume to be treated, the condition of the ducts, the room configuration, and the client's comfort expectations. A common mistake is to choose too large a machine, thinking it will yield a better result. In reality, an oversized system can cause short cycling, poor dehumidification, more noise, and premature wear. Our work therefore always begins with an analysis of the real context, not just a quick reading of the area.

Tight mechanical space: the real challenge of this installation

What makes this installation interesting is the immediate proximity between the components. The MIDEA equipment was installed in a space where clearances were limited, with existing ducts and a structure that left little room for error. We had to ensure a solid connection to the ventilation network while maintaining necessary access to service panels.

In the photo, several important elements are visible:

• the connection to the main duct above the unit;
• the integration of the central system into a restricted wall space;
• the presence of insulated refrigerant lines;
• the PVC condensate drain installed with a functional slope;
• carefully routed electrical and control connections;
• the AirGreen label affixed to the equipment, a sign of a project completed and followed up by our team.

In such a compact space, a poorly planned installation can quickly become difficult to maintain. At AirGreen, we pay particular attention to future access to filters, electrical panels, service connections, and internal components. A clean installation is not just about looking good: it facilitates diagnostics, reduces the risk of errors during HVAC maintenance, and extends the system's lifespan.

Technical execution where every detail counts

Adjustment to existing ducts

One of the most sensitive aspects of a central project is integration with existing ducts. In Verdun, several buildings have been renovated in stages over the years. Ducts may have been modified, partially insulated, widened, reduced, or adapted to older equipment. Before final installation, our team evaluates airflow, return configuration, and the compatibility of the appliance with the available network.

In this case, the goal was to maximize the performance of the MIDEA electric furnace without imposing unnecessary transformations. The upper connection was adjusted to ensure a clean transition to air distribution. A poor connection can lead to pressure losses, vibrations, air leaks, or uneven comfort from room to room. That's why we favor well-sealed connections, adequate insulation, and a robust finish.

Condensate drainage: a simple but essential detail

The drain visible on the installation plays a crucial role. When a central system operates in air conditioning mode, air humidity condenses on the indoor coil. This water must be properly evacuated. Insufficient slope, a misaligned connection, or a poorly supported drain can cause overflows, odors, safety shutdowns, or damage to the building.

On this project, the PVC drain was installed to allow reliable drainage. In our installations in Montreal, Laval, Longueuil, on the North Shore, and the South Shore, we always emphasize this point, as many avoidable service calls result from details neglected during initial installation.

Refrigerant lines and insulation

The insulated refrigerant lines, visible on the right side of the unit, connect the indoor unit to the outdoor system in a central heat pump configuration. Their installation must be neat, protected, and well-supported. Insulation is important to limit efficiency losses, prevent unwanted condensation, and protect components.

In a confined space, it is also necessary to prevent the lines from stressing the connections. A quick but misaligned installation can lead to vibrations, noise, or long-term mechanical stress. Our approach is to organize the lines cleanly, secure the routes, and maintain reasonable service access.

Electrical power and controls

An electric furnace requires serious attention to the electrical aspect. Connections must comply with manufacturer requirements, applicable standards, and the actual needs of the equipment. In this project, control wires were carefully routed to avoid clutter and facilitate future interventions.

The MIDEA EVOX G3 unit is designed to integrate with modern comfort logic. Depending on the complete system configuration, it can operate with adapted control for better management of heating, ventilation, and air conditioning. For the homeowner, this translates into more consistent comfort, better reaction to temperature variations, and more intuitive daily use.

What the client really wanted: comfort without complication

The client was looking for a reliable, well-installed central solution adapted to their space. In several similar projects in Verdun, homeowners don't just want to replace a machine. They want to avoid unpleasant surprises: excessive noise, poorly distributed air, difficult maintenance, disappointing energy bills, or an installation that seems improvised.

Our role is therefore to deliver a system that inspires confidence from the first use. After installation, we validate operation, airflow, drainage, connections, and system response. This commissioning step is essential, because even an excellent machine can yield poor results if not properly checked.

Mistakes to avoid when installing a central system like this

For homeowners considering a similar HVAC installation in Verdun or elsewhere in Greater Montreal, here are the most common mistakes we see in the field:

Choosing capacity based solely on area

The area provides a first indication, but it is not enough. Insulation, building orientation, windows, ducts, ceilings, number of floors, and usage habits all influence the choice of capacity. A MIDEA EVOX G3 1.5 ton may be perfect in one context and inadequate in another.

Neglecting the condition of the ducts

A central system depends on its ducts. If the network is undersized, leaky, or too restrictive, even good equipment will not be able to perform optimally. During our installations, we always observe connections, return air, and transitions.

Installing without thinking about maintenance

A unit jammed against a wall, with difficult-to-remove panels, can be more expensive to maintain. We install equipment with future technicians in mind, who will need to service it in a few years.

Underestimating drainage

A poorly designed drain can create more problems than a defective mechanical component. This is why condensate drainage deserves as much attention as the main connections.

Comparing price only

The price of a central installation does not just reflect the machine. It includes the quality of installation, duct adjustment, materials, commissioning, finish, warranties, and the team's experience. In the HVAC field, the difference between an average and a professional installation is often evident after a few seasons.

MIDEA EVOX G3: a relevant solution for urban homes

The MIDEA EVOX G3 range is often chosen for projects seeking a good balance between performance, comfort, and accessibility. In a market where homeowners compare several brands, MIDEA holds an interesting position for central systems, particularly when the installation is well-suited to the building.

For a property in Verdun, this electric furnace with Air Handler allows for central air distribution while modernizing the mechanical equipment. It's a particularly attractive option for homes with existing ducts, partial renovations, replacements of old systems, and projects where adding multiple wall units is undesirable.

Subsidies and eligibility: a point to check based on the complete configuration

Subsidy programs can vary depending on the exact model, combination with the outdoor unit, certified performance, installation address, and criteria in effect at the time of the project. For a central system like this, eligibility must always be confirmed with the complete model numbers and the requirements of the applicable program.

At AirGreen, we help clients understand the available options, particularly for installations in Montreal, Laval, Longueuil, on the North Shore, and the South Shore. We avoid promising a subsidy without validation, as criteria can change, and some configurations are eligible only when they precisely meet technical requirements.

An installation that reflects our AirGreen approach

This project in Verdun perfectly represents our way of working: analyzing the space, choosing an adapted solution, cleanly executing connections, respecting the equipment, and considering the client's actual comfort. In the field of central air conditioning, central heat pumps, electric furnaces, and HVAC maintenance, quality is often found in invisible details.

A well-sealed duct, a correct drain slope, preserved service access, well-insulated lines, and thorough commissioning make all the difference. These are the actions that allow a central system to operate efficiently, quietly, and durably.

Practical advice for homeowners in Verdun and Greater Montreal

Before replacing an electric furnace or central system, we recommend checking the following elements:

• the general condition of the ducts;
• the actual capacity required for the building;
• the space available for the new unit;
• access to service panels;
• the quality of existing drainage;
• compatibility with a central heat pump, if applicable;
• subsidy possibilities;
• the installer's reputation and experience with central systems.

In areas such as Verdun, Villeray, Ahuntsic, Laval, Brossard, Longueuil, Terrebonne, Blainville, and the South Shore, these checks are particularly important, as buildings can present very different constraints from one address to another.

Well-installed central comfort is felt every day

Once the installation is complete, the client benefits from a modern central system, neatly integrated into their mechanical space and ready to provide stable comfort daily. The objective was not just to install a MIDEA EVOX G3 1.5 ton electric furnace, but to deliver a complete, reliable, and building-adapted solution.

At AirGreen, we see each project as a combination of technical expertise, field experience, and respect for the home. This installation in Verdun is an excellent example: compact, meticulous, functional, and designed to last.