Installation of a Fujitsu wall-mounted heat pump in Saint-Bruno (South Shore)
AirGreen installed a Fujitsu AIRSTAGE R-32 wall-mounted heat pump in Saint-Bruno. Discover why the raised mounting bracket, clearances, and well-thought-out installation improve performance, reduce noise, and ensure reliability in Quebec's climate.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
On the South Shore, in Saint-Bruno , single-family homes often present a very specific HVAC challenge: achieving stable air conditioning in the summer while enjoying efficient heating during the shoulder seasons (and for as long as possible in winter), without increasing electricity bills. This is precisely the objective of this installation by AirGreen , using a Fujitsu AIRSTAGE wall-mounted heat pump with R-32 refrigerant.
Although the photo mainly shows the outdoor unit, the overall setup clearly corresponds to a mini-split system (wall-mounted indoor unit + outdoor condenser). This is a perfect solution when you want targeted comfort (living room, open-plan area, upstairs, master bedroom) without the need for extensive ductwork.
The system installed: Fujitsu wall-mounted heat pump (AIRSTAGE R-32)
Since the brand name is provided manually, it is indeed a Fujitsu . The visible label also indicates AIRSTAGE and R-32 , which points to a recent, high-performance generation better aligned with new refrigerant standards.
To remain consistent with the Fujitsu R-32 range used in residential settings, a typical and realistic model in this context is a Fujitsu Orion XLTH (KZAH R-32) — a series appreciated for its ability to maintain good performance when the outside temperature drops (an important point in Quebec).
What the outdoor installation reveals (and why it matters)
1) Elevated unit on metal support: a winning choice in Quebec
The outdoor unit is placed on a raised support installed on a concrete base. This approach is particularly relevant in our climate, as it helps to:
-
to limit the impact of snow and ice accumulation on the ground,
-
improve drainage around the device,
-
reduce the risk of obstructed airflow in winter,
-
facilitate maintenance (easier access, quick visual inspection).
It's a detail that seems "simple", but it has a huge impact on reliability season after season.
2) Clearances and positioning near the facade
The unit is installed close to the wall, but with sufficient clearance on the supply/exhaust side. The proximity of a window is also noted: in these cases, particular attention is paid to:
-
the fan's orientation,
-
vibration reduction,
-
and the positioning in order to preserve acoustic comfort inside.
3) Environmental management: vegetation and obstacles
We see ornamental grasses and a flowerbed nearby. In a single-family home, this is very common, and it implies a golden rule: keep the unit clear to prevent vegetation from reducing airflow and accelerating coil fouling. At AirGreen, we install cleanly, then clearly explain the distances to maintain to protect performance.
4) Clean, stable installation ready for the seasons
The support is level, the unit is properly leveled, and the installation on a solid slab provides a stable base. This stability contributes to:
-
reduce resonance noise,
-
limit premature wear,
-
to improve the customer experience on a daily basis.
Why a Fujitsu wall-mounted unit is ideal for a home in Saint-Bruno
In this type of property, a mini-split system is often chosen because:
-
to effectively air-condition an open area (living room/kitchen),
-
to improve the comfort of a floor that overheats in the summer,
-
reduce the use of baseboards in autumn and spring,
-
to obtain precise control piece by piece (depending on the area targeted).
A well-sized Fujitsu AIRSTAGE stands out because of:
-
stable inverter modulation (fewer "start/stop" cycles),
-
more consistent comfort
-
excellent mid-season yield,
-
It generally operates very quietly when the installation is done correctly.
What we systematically monitor at AirGreen (the real difference)
Even an excellent machine won't reach its full potential if certain aspects are overlooked. For this type of project, we apply our AirGreen standards:
-
Route of refrigeration lines : logical, protected, with clean finishes.
-
Rigorous vacuuming : essential for the longevity of the compressor.
-
Leak testing : preventing losses and maintaining performance.
-
Condensate management : reliable drainage, adequate slope, prevention of backflow.
-
Clearances : for air, maintenance, noise… and durability.
-
Stability / anti-vibration : to protect the structure and acoustic comfort.
Maintenance advice for this type of installation (single-family home)
To maintain optimal performance year after year:
To be done regularly
-
Keep the outdoor unit clear (leaves, branches, grass, snow).
-
Visually check that no object is blocking airflow.
To be done periodically
-
Cleaning of the coils (if necessary, especially if in a vegetated environment).
-
Complete inspection (electrical connection, supports, general condition, operating parameters).
Simple and well-planned maintenance prevents performance drops and extends the system's lifespan.
Conclusion: a Fujitsu installation designed for comfort and the Quebec climate
This installation in Saint-Bruno highlights an approach we favour at AirGreen: choosing a Fujitsu AIRSTAGE R-32 wall-mounted heat pump adapted to Quebec, then installing it in a durable manner — elevated, stable, well clear and properly integrated into the exterior landscaping.
The result: superior comfort in summer, better efficiency in mid-season, and an installation ready to face our winters.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).