Job sheet · Project

Installation of a FUJITSU KZ 12,000 BTU Mini Split Wall-Mounted Heat Pump in Lorraine (North Shore)

Installation of a 12,000 BTU FUJITSU heat pump in Lorraine, above a window. Compact, efficient, and aesthetic HVAC solution, ideal for Montreal, Laval, Longueuil, North Shore, and South Shore.

By AirGreen Climatisation & Chauffage Admin4 min read
City
Region
Equipment
Brand
Challenges
Published
–chapters, to open one by one
4 minto read the whole story
–type of installation
2026year published
At a glance

The job on one screen

Installation of a FUJITSU KZ 12,000 BTU Mini Split Wall-Mounted Heat Pump in Lorraine (North Shore)
Installation of a FUJITSU KZ 12,000 BTU Mini Split Wall-Mounted Heat Pump in Lorraine (North Shore)
The full story

The article, chapter by chapter

Discreet and High-Performance Integration Above a Window: A Custom HVAC Project in Lorraine

At AirGreen, every HVAC installation represents an opportunity to demonstrate our technical rigor and our ability to adapt the best solutions to the specific realities of each residence. This project carried out in Lorraine, on Montreal's North Shore, perfectly illustrates this approach: a FUJITSU KZ 12,000 BTU wall-mounted heat pump, installed above a window in a confined space, requiring precision, expertise, and attention to detail.


A Demanding Residential Context: Space Constraints and Comfort Optimization

The client contacted us with the goal of improving the thermal comfort of their main living space, particularly during hot summer periods and the harsh cold typical of Quebec's climate. The ideal location for the indoor unit was limited: a wall above a window, framed by solid wood moldings.

Identified Challenges:

  • Restricted space between the ceiling and the top of the window
  • Presence of decorative moldings to be preserved
  • Need for optimal positioning for uniform air distribution
  • Significant aesthetic constraints for the client

Heat Pump Choice: FUJITSU KZ 12,000 BTU

We recommended a FUJITSU KZ 12,000 BTU heat pump, a model renowned for its reliability, energy efficiency, and cold climate performance.

Key Technical Characteristics:

  • Capacity: 12,000 BTU
  • Refrigerant: R-32, more eco-friendly and efficient
  • SEER2: up to 26+
  • HSPF2: approximately 12.5
  • Efficient operation down to -25°C
  • Indoor sound level: extremely quiet
  • Integrated Wi-Fi for remote control

Why this choice was optimal:

  • Perfect for a medium-sized room
  • Excellent energy efficiency eligible for subsidy programs
  • Compact format ideal for installation above a window

Mastered Technical Installation in a Delicate Space

Installation above a window requires special attention, both structurally and aesthetically. Our technicians proceeded methodically to ensure perfect integration.

Key Installation Steps:

1. Preparation and precise measurement

We took exact measurements of the available dimensions to position the indoor unit centrally and balanced.

2. Adjustment of wall mounts

Given the presence of moldings, we used adapted supports to ensure a solid fixation without damaging the existing structure.

3. Strategic drilling for conduit passage

The wall hole was precisely made to allow the passage of refrigerant lines, drain, and electrical wiring, while minimizing visual impact.

4. Vacuum pull and micron test

As always at AirGreen, we performed a complete vacuum pull to eliminate any moisture in the system. The micron test confirmed perfect sealing.

5. Outdoor unit installation

The outdoor unit was installed on a stable support, with sufficient clearance to ensure optimal performance in winter.


Final Result: Aesthetics, Performance, and Customer Satisfaction

The result is a clean, discreet, and perfectly integrated installation. The indoor unit fits harmoniously above the window, without compromising the room's aesthetics.

Immediate Benefits for the Customer:

  • Constant thermal comfort in summer and winter
  • Significant reduction in energy costs
  • Smart control via Wi-Fi
  • Remarkable operating silence

Available Subsidies and Return on Investment

Thanks to its energy efficiency, the FUJITSU KZ heat pump is eligible for Hydro-Québec's LogisVert program.

Estimated Financial Details:

  • Potential subsidy: approximately $1,200 to $1,500
  • Annual savings on energy bills
  • Rapid amortization of the investment

Practical Advice for Similar Installations

For homeowners in Montreal, Laval, Longueuil, North Shore, and South Shore, considering a similar installation:

To Consider:

  • Check the available space above openings
  • Choose a compact and high-performance model
  • Call a certified contractor to avoid installation errors

Mistakes to Avoid:

  • Installing too close to the ceiling without clearance
  • Neglecting the vacuum pull
  • Undersizing or oversizing the unit

Why Choose AirGreen for Your HVAC Installation in Lorraine and Surroundings

At AirGreen, we distinguish ourselves by:

  • Proven field expertise in Montreal, Laval, Longueuil, North Shore, and South Shore
  • Meticulous installations down to the smallest detail
  • Total transparency in our recommendations
  • Reliable and accessible after-sales service

Each project is treated with the same level of demanding standards, whether it's a simple or complex installation.


Conclusion: A Smart and Sustainable HVAC Solution

This FUJITSU wall-mounted heat pump installation in Lorraine demonstrates that it's possible to combine architectural constraints, energy performance, and aesthetics. Thanks to our personalized approach and technical mastery, we have transformed a challenge into a durable and efficient solution.

Your numbers

The job tools

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    The steps

    How the job unfolds

    The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

    Step 1 of 9The on-site estimate

    We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

    1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
    2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
    3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
    4. The wall openingA single opening, with the slope the drain needs to flow outside.
    5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
    6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
    7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
    8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
    9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
    The tour

    What we check on a job like this one

    Each number is a point we check on site. Switch between summer and winter to watch air and heat move.

    Generic diagram: wall-mounted heat pump, indoor and outdoor units

    In summer, the outdoor unit rejects the house's heat outside.

    Generic illustration of this type of installation, not a survey of this job site. Tap a number.

    1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

    2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

    3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

    4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

    5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

    6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

    7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

    At your place

    Is your home ready?

    Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.

    0 / 6 checked
    Maintenance

    Good habits, once the unit is in place

    Six simple habits that keep the unit going. Your list stays on this device.

    0 / 6 checked
    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    For your project

    The right pages, at the right time

    True or false

    Four statements: true or false?

    It all comes down to details you have just seen.

    1. In heating mode, the outdoor unit can produce water.

    2. You pick the capacity with a simple square-footage rule.

    3. A multi-zone connects several indoor heads to a single condenser.

    4. The disconnect can sit behind the patio furniture.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    An on-site estimate, the right capacity, the right equipment.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment