Project

Installation of a Gree Extreme 12,000 BTU Mini Split in LaSalle, Montreal

Looking for a heat pump that handles -30°C? Check out our recent Gree Extreme installation in LaSalle! Energy-efficient, quiet, and powerful, it's the perfect HVAC solution for Montreal's climate.

By AirGreen Climatisation & Chauffage Admin6 min read
Installation of a Gree Extreme 12,000 BTU Mini Split in LaSalle, Montreal
Installation of a Gree Extreme 12,000 BTU Mini Split in LaSalle, Montreal
Generic diagram: wall-mounted heat pump, indoor and outdoor units

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

  2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

  3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

  4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

  5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

  6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

  7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

A Tailor-Made Solution for Comfort in LaSalle

In the heart of LaSalle, Montreal, we recently completed a unique installation that is the perfect example of combining efficiency, innovation, and expert craftsmanship. This project involved the installation of the Gree Extreme 12,000 BTU Mini Split, a cutting-edge wall-mounted heat pump designed for the extreme Canadian climate. With temperatures that can plunge to -30°C, choosing the right HVAC system for a Montreal home is crucial, and the Gree Extreme model was the ideal choice for this particular residence.

The Backstory: Addressing the Client's Needs

Our client in LaSalle had been experiencing fluctuations in home comfort, especially during the harsh winter months. They needed a system that could maintain consistent heating in extreme cold while also providing efficient cooling during the hot and humid Montreal summers. After a detailed consultation, we recommended the Gree Extreme 12,000 BTU Mini Split—a model known for its reliability, even in temperatures as low as -30°C.

The system’s ability to perform in both heating and cooling modes was an essential factor for our client. Additionally, this model qualified for the LogisVert Hydro-Québec grant of $972, significantly reducing the overall cost of installation. Not only would this heat pump provide optimal indoor comfort year-round, but it would also help the homeowner save on energy costs through its energy efficiency of 30.5 SEER.

Installation Challenges and Expert Solutions

Every installation presents its own unique set of challenges, and this project was no different. The home’s exterior layout required our team to carefully plan the placement of both the indoor and outdoor units. The exterior unit, measuring 35.38 x 14.88 x 23.5 inches, had to be mounted in a way that allowed optimal airflow while maintaining the aesthetic appeal of the building.

Furthermore, the Gree Extreme’s heating base had to be installed with precision to ensure that the system could handle condensate freezing, especially during Montreal’s notoriously icy winters. This base, equipped with a heating element, prevents ice buildup, ensuring the unit remains efficient even in sub-zero temperatures.

Inside the house, we installed the compact indoor unit—with dimensions of 38.19 x 8.86 x 11.81 inches—which blended seamlessly into the modern interior décor. The installation process also included connecting the 1/4 - 1/2-inch pipes for refrigerant flow and ensuring all Wi-Fi controls were set up, allowing the client to manage the system remotely via the GREE+ app.

Features of the Gree Extreme Mini Split

Heating Power that Handles -30°C

One of the most impressive features of the Gree Extreme Mini Split is its ability to maintain heating capacity even at -30°C. This was a critical selling point for our client, who, like many in Montreal, has to deal with intense cold snaps during the winter. The two-stage compressor plays a vital role in this, delivering maximum heating power while consuming minimal energy.

Energy Star Certified and Grant Eligible

Efficiency is at the heart of the Gree Extreme. With an Energy Star certification, it qualifies for both federal and provincial grants, making it an eco-friendly and budget-friendly choice for homeowners. The federal grant of up to $5,000 further sweetens the deal, ensuring homeowners can significantly offset their initial investment in a new HVAC system.

Wi-Fi Connectivity and the GREE+ App

One of the perks of installing the Gree Extreme is its Wi-Fi connectivity. Homeowners can control their system remotely via the GREE+ app, adjusting temperature settings, airflow, and even activating the Turbo Mode for rapid temperature changes. This feature offers both convenience and energy savings, as the system can be fine-tuned to meet exact preferences, even when the homeowner isn’t home.

Ultra Quiet Operation

In urban areas like LaSalle, noise pollution can be a concern. Luckily, the Gree Extreme is designed to operate with minimal sound. The indoor unit has a sound pressure level of just 22 dB(A) on its lowest setting—equivalent to a soft whisper. The outdoor unit, at 53.0 dB(A), is quiet enough to blend into the background noise, ensuring the system remains unobtrusive in everyday life.

Why AirGreen?

At AirGreen, we pride ourselves on delivering top-notch service and expert installations that guarantee customer satisfaction. Our experience in handling complex HVAC installations throughout Montreal, Laval, Longueuil, and the surrounding areas ensures that every project is completed to the highest standard.

For this project in LaSalle, we worked closely with the homeowner to address their specific needs—both functional and aesthetic. Our team carefully installed the Gree Extreme mini split in a way that not only maximized performance but also maintained the visual appeal of the home.

The Gree Extreme—A Perfect Fit for Montreal's Climate

Choosing the right HVAC system for Montreal’s unpredictable weather can be a daunting task. The Gree Extreme Mini Split is a proven performer, offering:

  • Cooling Capacity of 12,000 BTU
  • Heating Capacity down to -30°C
  • Turbo Mode for quick temperature adjustments
  • Five-speed airflow control
  • Intelligent Defrosting System to ensure energy efficiency during the cold months
  • Memory Function that allows the unit to restart with the last used settings in the event of a power outage

This system is built to withstand the toughest weather conditions while providing unparalleled comfort year-round.

Conclusion

This recent installation in LaSalle demonstrates AirGreen’s commitment to quality and customer satisfaction. The Gree Extreme 12,000 BTU Mini Split was the perfect choice for a home in Montreal’s challenging climate, offering both heating and cooling at maximum efficiency. From the precise installation process to the cutting-edge features of the unit, this project showcases the expertise and dedication that AirGreen brings to every job.

If you're looking for an HVAC solution that can handle extreme temperatures, while also being energy-efficient and grant-eligible, the Gree Extreme Mini Split is a top contender. At AirGreen, we ensure that every installation is tailored to meet your specific needs, delivering comfort, efficiency, and peace of mind.

The steps

How it goes, from the first call to the end

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 9The on-site estimate

We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

  1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
  2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
  3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
  4. The wall openingA single opening, with the slope the drain needs to flow outside.
  5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
  6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
  7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
  8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
  9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
Your numbers

And at your place?

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    And at your place?

    Which type of equipment for your project?

    Pick what looks like your need.

    Mistakes avoided

    Four mistakes we do not make

    Flip each card to see what we do instead.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.
    Going further

    Useful pages for what comes next

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    Tell us about your house. We come and see it for free.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    1 comment

    yvan
    yvan

    quel sont les chiffres en seer et hspf pour les 12000 btu pour toute vos thermopompe disponible merci

    Leave a comment