Installation of a GREE LIVO R32 Wall-Mounted Heat Pump – Mini Split Air Conditioner in Saint-Bruno-de-Montarville
AirGreen installs a GREE LIVO R32 wall-mounted heat pump in Saint-Bruno: R-32 mini split, precise installation in a tight space, stable comfort, professional HVAC service on the South Shore.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A compact, precise wall installation adapted to a challenging interior space
In Saint-Bruno-de-Montarville, on the South Shore, our AirGreen team installed a GREE LIVO R32 wall-mounted heat pump, also used as a mini split wall air conditioner, in a room where every inch counted. The photo of this project clearly shows the context: an indoor unit installed near a wall corner, above existing wood trim, with a wall surface that required special attention to achieve a clean, functional, and durable result.
This type of HVAC installation may seem simple at first glance. Yet, in a real house, walls are never just walls. You have to deal with woodwork, moldings, clearances, corners, existing materials, the routing of refrigerant lines, condensate drainage, and the ideal location to ensure good air distribution. In this particular case, the goal was clear: to install a high-performance and discreet heat pump, without compromising the room’s aesthetics or the system’s technical quality.
The GREE LIVO R32 was very suitable for this project thanks to its compact wall-mounted design, inverter operation, and use of the R-32 refrigerant. According to the data for the LIVO R32 series published by the manufacturer, this range can reach up to 20.5 SEER2, 12.5 EER2, and 8.8 HSPF2, depending on the exact combination of indoor and outdoor units, with a heating range announced up to about -25 °C.
A difficult wall, but a well-planned solution
The installation was carried out in an indoor area where lateral clearance was limited. The right side of the unit is near a wall return, which requires very precise positioning. A wall-mounted heat pump must not only be visually centered: it must also allow panel opening, filter access, air circulation, and future maintenance without difficulty.
Before fixing the wall plate, our team checked:
- the solidity of the anchoring surface;
- the exact level of the unit;
- the clearance needed for air intake and exhaust;
- the drilling angle for the passage of pipes;
- the slope of the condensate drain;
- the protection of existing woodwork;
- the cleanest path to the outdoor unit.
In a house in Saint-Bruno, where interior finishes are often meticulous and sometimes older, this step makes all the difference. A poor drain slope can cause water backflow. A poor choice of location can reduce comfort in the room. An imprecise drilling can cause unnecessary damage. At AirGreen, we treat these details as central elements of the work, not just simple site adjustments.
The GREE LIVO R32: a practical choice for residential comfort
The GREE LIVO R32 is a wall-mounted heat pump designed to provide both air conditioning and heating in a mini split ductless format. It is especially aimed at homeowners who want to improve the comfort of a room, a floor, or a specific area without undertaking major renovation work.
In this project in Saint-Bruno, the client was looking for a solution capable of stabilizing the room temperature while maintaining a simple appearance. The white wall unit fits well with the existing decor, and its digital display allows you to quickly see the set temperature. In the photo, the device is set to 20 °C, which clearly illustrates the intended use: stable comfort, without excessive noise or sudden temperature changes.
The inverter operation allows the machine to modulate its power instead of simply starting and stopping repeatedly. This modulation helps maintain a more consistent temperature, reduce short cycles, and improve the overall system efficiency. For a residence in Saint-Bruno, where temperature variations between seasons are significant, this type of technology represents a concrete advantage.
A clean installation despite visible constraints
This project presented a significant aesthetic constraint: the unit had to be installed above an existing wooden element, in an area where the old wall finishes were visible. Our team therefore worked with a very methodical approach to minimize marks, protect surfaces, and maintain a coherent visual alignment.
Installing a wall-mounted heat pump requires precision beyond simply fixing it to the wall. The unit must be slightly positioned to allow condensate drainage, but it must also appear perfectly straight once installed. This is especially important in a room where the line of the woodwork naturally serves as a visual reference. The slightest deviation is immediately noticeable.
We also paid special attention to the outlet of the ducts. In this type of space, a poorly placed passage can become very visible. The goal was to keep the installation as discreet as possible while respecting technical standards: well-insulated refrigerant lines, properly oriented drain, protected wiring, and preserved service access.
Comfort, noise, and air circulation
The position of a wall unit directly affects comfort quality. A unit placed too close to an obstacle may distribute air poorly. A unit installed in a corner without prior consideration can create a cold or hot spot, depending on the mode used. For this installation in Saint-Bruno, our team assessed the airflow direction to maximize diffusion in the room.
The GREE LIVO R32 is suitable for residential spaces where noise level is an important factor. In a bedroom, living room, office, or living area, acoustic comfort matters as much as thermal performance. Proper placement, adequate leveling, and quality installation directly influence the quiet operation of the unit.
A high-performance machine poorly installed can become noisy, vibrate, or lose efficiency. Conversely, a well-executed installation allows the system to operate more smoothly and stably. This is precisely what we seek in every AirGreen project in Montreal, Laval, Longueuil, on the North Shore and on the South Shore.
What this project in Saint-Bruno teaches owners shopping for a heat pump
The exact capacity must be chosen according to the room, not just the price
An essential point in any wall-mounted heat pump project is the choice of capacity. The GREE LIVO R32 range exists in several capacities, but the right choice always depends on the building: area, insulation, solar orientation, ceiling height, number of windows, room use, and presence of other heating sources.
In this project, we emphasized a simple principle: a heat pump that is too small works too hard; a heat pump that is too large can create short cycles and less stable comfort. The right machine is the one that matches the actual need of the room.
That is why AirGreen does not limit itself to proposing a random model. We analyze the space, installation constraints, and client expectations. In Saint-Bruno as in Boucherville, Sainte-Julie, Saint-Basile-le-Grand, Montreal, or Laval, this step helps avoid the most costly mistakes.
Subsidies must be validated with the exact AHRI number
For owners who wish to obtain financial aid, it is important to understand that eligibility does not depend solely on the commercial name of the machine. It depends on the exact combination of the indoor and outdoor units, the AHRI number, and the criteria in effect at the time of the application. Hydro-Québec provides a search tool to verify heat pumps eligible for the LogisVert program.
In the case of a GREE LIVO R32, AirGreen checks the technical data before confirming the information related to subsidies. We also help the client better understand the documents to keep: detailed invoice, indoor model, outdoor model, serial number, proof of installation, and necessary information for the application.
This rigor prevents unpleasant surprises. A client may see a subsidy amount announced on a general sheet, but the actual confirmation must always be made with the installed combination. This is a step we naturally integrate into our service.
Common mistakes to avoid during a wall installation
This project in Saint-Bruno illustrates several mistakes that homeowners should avoid when comparing quotes for an HVAC installation.
The first mistake is choosing the location based only on appearance. The unit should look good in the room, but above all, it must breathe well, drain well, and distribute air properly.
The second mistake is underestimating the importance of the drain. A condensate drain with poor slope can cause leaks, odors, or humidity problems. It is one of the most important elements of a wall air conditioner installation.
The third mistake is comparing only the price without considering the quality of the installation. Two quotes may be for the same device but may not include the same level of finish, the same wall protections, the same quality of piping, the same outdoor support, or the same follow-up after installation.
The fourth mistake is not planning for HVAC maintenance. A wall-mounted heat pump must be cleaned regularly: filters, exchanger, turbine, drain, and outdoor unit. Proper maintenance extends the equipment's lifespan and preserves its performance.
Commissioning, a step we never treat as a formality
Once the unit is installed, our team proceeds with the commissioning. This step includes checking the connections, drainage, communication between units, heating and cooling response, as well as the operation of the vents and the remote control.
In this installation, the 20 °C setting visible on the unit shows that the system was operational at the time of startup. But for AirGreen, seeing the display light up is not enough. We check the device's behavior, the stability of the airflow, and the absence of abnormal noise. We also explain to the client how to use the main modes, how to clean the filters, and how to avoid settings that reduce efficiency.
Why AirGreen is often called for this type of installation on the South Shore
In Saint-Bruno and neighboring municipalities, many homes have unique layouts: rooms with sloped ceilings, existing woodwork, older walls, extensions, finished basements, condos, semi-detached houses, and spaces where the outdoor unit must be carefully placed to respect the neighborhood.
Our experience with heat pump, wall air conditioner, and mini split projects allows us to offer solutions tailored to these realities. We don’t just aim to install a machine quickly. We aim for a durable, clean, compliant, and practical installation for the client.
AirGreen regularly works in Montreal, Laval, Longueuil, on the North Shore and on the South Shore, with an approach that combines technical expertise, respect for the premises, and clear guidance. In this Saint-Bruno project, this approach transformed a challenging space into a functional and discreet installation.
A final result that is simple, efficient, and designed for everyday life
The final result is a GREE LIVO R32 wall-mounted heat pump neatly installed in a tight space, with a visually coherent integration and full commissioning. The client now benefits from a system that can provide cooling in summer and heating in the cold season, while maintaining an installation that’s easy to use daily.
This type of project perfectly sums up our work at AirGreen: analyzing real constraints, choosing a suitable solution, installing with precision, and delivering a result that genuinely improves home comfort.
For Saint-Bruno homeowners considering an HVAC installation, this project shows that a good outcome doesn’t rely solely on choosing a brand. It depends on the entire process: assessment, location, quality of installation, connections, commissioning, client explanation, and post-installation support.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What the unit delivers when it is cold
The range as published on airgreen.ca: pick a size to see its capacity in deep cold.
| Size | Heating at −8 °C | Heating at −15 °C | Coldest certified point | COP at −15 °C | SEER | HSPF | Indicative LogisVert aid |
|---|---|---|---|---|---|---|---|
| Gree Livo R32 9 000 (115 V) | 10,000 | 7,600 | −25 °C: 5,700 | 1.86 | 20.5 | 8.8 | – |
| Gree Livo R32 9 000 | 9,600 | 7,600 | −25 °C: 5,500 | 1.94 | 20.5 | 8.8 | – |
| Gree Livo R32 12 000 (115 V) | 9,700 | 8,500 | −25 °C: 6,500 | 1.75 | 19.0 | 8.5 | – |
| Gree Livo R32 12 000 | 9,700 | 9,100 | −25 °C: 6,500 | 1.8 | 19.0 | 8.5 | $1,164 |
| Gree Livo R32 18 000 | 15,300 | 12,100 | −25 °C: 10,200 | 1.85 | 20.0 | 8.5 | $1,836 |
| Gree Livo R32 24 000 | 19,200 | 15,700 | −25 °C: 10,500 | 1.75 | 19.0 | 8.5 | $2,304 |
| Gree Livo R32 30 000 | 24,000 | 23,000 | −25 °C: 16,900 | 1.8 | 22.0 | 9.0 | $2,880 |
| Gree Livo R32 36 000 | 27,400 | 24,600 | −25 °C: 21,000 | 1.8 | 21.0 | 8.5 | $3,288 |
According to NEEP, it delivers 10,000 BTU/h at −8 °C (17 °F), as much as at 8 °C. It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −25 °C (−13 °F) is 5,700 BTU/h, 63% of its nominal 9,000 BTU size.
At 8 °C, its certified maximum capacity reaches 13,300 BTU/h, 48% more than its nominal 9,000 BTU size.
According to NEEP, its COP at −15 °C is 1.94: the highest of the Livo R32 line, which ranges from 1.75 to 1.86 at that temperature.
According to NEEP, its certified maximum capacity at −25 °C (−13 °F) is 5,500 BTU/h, 61% of its nominal 9,000 BTU size.
At 8 °C, its certified maximum capacity reaches 13,136 BTU/h, 46% more than its nominal 9,000 BTU size.
According to NEEP, it delivers 8,500 BTU/h at −15 °C, against 9,100 for the Gree Livo R32 12 000.
At −25 °C, its certified minimum capacity is 1,800 BTU/h (3,070 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 8,500 BTU/h, 71% of its nominal 12,000 BTU size. Its COP there is 1.75.
According to NEEP, it delivers 9,100 BTU/h at −15 °C, against 8,500 for the Gree Livo R32 12 000 (115 V).
At −25 °C, its certified minimum capacity is 1,800 BTU/h (3,070 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 9,100 BTU/h, 76% of its nominal 12,000 BTU size. Its COP there is 1.80.
At 8 °C, its certified maximum capacity reaches 22,500 BTU/h, 25% more than its nominal 18,000 BTU size.
According to NEEP, its certified minimum capacity is at least 7,000 BTU/h at every temperature. In a small, well-insulated room it will cycle on and off more often: size it carefully.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 12,100 BTU/h, 67% of its nominal 18,000 BTU size. Its COP there is 1.85.
At −25 °C, its certified minimum capacity is 3,100 BTU/h (5,800 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 15,700 BTU/h, 65% of its nominal 24,000 BTU size. Its COP there is 1.75.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 23,000 BTU/h, 77% of its nominal 30,000 BTU size. Its COP there is 1.80.
According to NEEP, its COP at −25 °C is 1.54: the highest of the Livo R32 line, which ranges from 1.30 to 1.52 at that temperature.
At −25 °C, its certified minimum capacity is 7,000 BTU/h (10,000 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 24,600 BTU/h, 68% of its nominal 36,000 BTU size. Its COP there is 1.80.
Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.A dash in the aid column: amount to be confirmed for this model.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):
Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.
Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).