When we talk about four-season comfort in Laval, Sainte-Dorothée often comes up in our requests: single-family homes, landscaped lots, green backyards… and a very clear need: to heat efficiently in winter, to air-condition quietly in summer , without altering the outdoor space.
In this project, our AirGreen team installed aMidea wall-mounted heat pump , paying particular attention to placement , airflow , snow protection , and clean ductwork integration . The result: a securely mounted, elevated outdoor unit, ready to withstand the freeze/thaw cycles typical of Greater Montreal.
A logical choice in Laval: the Midea wall-mounted heat pump
A wall-mounted heat pump (mini-split) is often the best option when you want to:
-
Adding comfort to a specific area (living room, open area, upper floor, basement)
-
Reduce energy bills compared to direct electric heating
-
Enjoy efficient air conditioning in the summer
-
Obtain a silent and modulating system (inverter technology)
Here, the brand supplied is Midea (and it's the one we're using as a reference throughout the project). For a residential context in Laval, we selected a model consistent with local needs and the requirements of a Quebec winter: Midea28 (extreme cold range, depending on configuration).
What the image reveals: an installation designed to last
The photo clearly shows several technical decisions that improve reliability and longevity:
1) Outdoor unit on a raised wall bracket
The unit is mounted on a metal wall bracket , above the floor. This is excellent practice in our region because it:
-
Reduces the risk of being buried during snowstorms
-
Limits exposure to splashes, mud and water pooling
-
Prevent ice from forming a "base" under the appliance during thaws
2) Side location, near the house, with air clearance
We're dealing with a light-colored exterior wall, with a clear space in front of the fan. This is important because:
-
Maintain good air exchange
-
Maintaining stable heating performance
-
Prevent air recirculation and efficiency losses
3) Clean and discreet routing of refrigeration lines
A well-guided path of conduits leads to the house. A neat finish isn't just aesthetically pleasing: it also protects the lines from UV rays, impacts, and wear.
4) Installation compatible with a landscaped environment
The presence of a garden container and nearby vegetation is common in Sainte-Dorothée. Our approach is to respect the existing layout while preserving the necessary clearances, to prevent the plants from eventually obstructing airflow (and therefore reducing yield).
Why the Midea28 range is particularly well-suited to Greater Montreal
Without making unrealistic promises (each configuration depends on the sizing and thermal load), the Midea28 range is generally chosen for very concrete reasons:
-
Comfortable heating even in cold weather , useful during peak winter periods.
-
Progressive modulation (inverter): the device adjusts itself rather than being in constant on/off mode
-
Good noise level : both outside (neighborhood) and inside (daily comfort)
-
An ideal solution for replacing or reducing the use of electric baseboard heaters
In Laval, you often see houses that are still primarily heated with electricity. A properly installed wall-mounted heat pump allows you to shift a significant portion of your heating to a more efficient system, while also gaining truly pleasant air conditioning in the summer.
AirGreen control points during this type of installation
To ensure the result remains stable over 10–15 years, it's not simply a matter of "setting a unit." Here's what we systematically validate:
Clearances and air circulation
-
Sufficient distance in front of the fan
-
Positioning that avoids corners where air "recirculates"
-
Intelligent avoidance of obstacles (fences, tight corners, flowerbeds)
Water management (defrosting)
In heating mode, a heat pump defrosts: water can leak and freeze. Being elevated helps a lot, but we also assess:
-
Drainage behavior
-
The risk of ice patches at the base of the wall
-
The orientation to limit projections towards passageways
Anti-vibration and stability
-
Sturdy support, properly anchored
-
Suitable pads/insulation
-
Checking for resonance (important in quiet residential areas)
Finishing and protecting the lines
-
Clean routing of the conduits
-
UV and weather protection
-
Careful sealing at the point of entry into the building
A level of comfort that stands out… without drawing attention to itself.
The advantage of an installation like this is that it provides an immediate benefit:
-
Stable temperature in the main rooms
-
Fewer areas that are too hot/too cold
-
Effective air conditioning during heat waves
-
Quiet operation on a daily basis
And most importantly: the outdoor unit is positioned so as not to obstruct the courtyard , while remaining accessible for maintenance.
Recommended maintenance: simple, but essential
To maintain the performance of a Midea wall-mounted heat pump:
-
Cleaning the indoor unit filters (regularly)
-
Annual or periodic checks as needed
-
Clearance around the outdoor unit (avoid leaves, branches, vegetation too close)
-
Deep cleaning as needed (fine dust, grease, pet hair, etc.)
A well-maintained system means fewer breakdowns , better performance, and consistent comfort.
Conclusion: A successful Midea installation in Sainte-Dorothée, Laval
This project perfectly illustrates AirGreen's philosophy: a clean , robust installation designed for Quebec's climate and the actual use of a home in Laval. With a Midea wall-mounted heat pump (compatible model: Midea28 ), the client benefits from year-round comfort, improved energy efficiency, and a discreet system that blends seamlessly into the environment.