Project

Installation of a Sharp wall-mounted heat pump in Brossard

In Brossard, AirGreen installed a Sharp TU 18,000 BTU wall-mounted heat pump above a large bay window. This discreet and efficient solution stabilizes the room temperature, improves comfort near windows, and reduces energy consumption year-round.

By AirGreen Climatisation & Chauffage Admin6 min read
Installation of a Sharp wall-mounted heat pump in Brossard
Installation of a Sharp wall-mounted heat pump in Brossard
Generic diagram: wall-mounted heat pump, indoor and outdoor units

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

  2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

  3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

  4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

  5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

  6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

  7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

In this bright Brossard home, the owners wanted to modernize their heating and cooling without cluttering the space or obstructing the beautiful bay window overlooking the garden. Their goal: an efficient solution for both air conditioning and heating, aesthetically discreet, and perfectly suited to the temperature variations of the Quebec climate.

We offered them the installation of aSharp wall-mounted heat pump , Sharp TU model of 18,000 BTU , a new generation wall unit operating on R-32 refrigerant and equipped with a modulating (inverter) compressor.


Context: a living room with lots of windows, difficult to keep comfortable

The room in question is a main living space on the ground floor:

  • Wall painted in a bright blue, giving a warm and contemporary look;

  • Large bay window with solid wood frame, offering a direct view of the outside vegetation;

  • Very sunny orientation, which leads to overheating in the afternoon during the summer ;

  • A sensation of cold walls and drafts near the windows in the middle of winter.

Before our intervention, the family complained of:

  • Significant temperature variations between the corner near the window and the rest of the room;

  • Heavy, stagnant air during heat waves;

  • Frequent use of electric baseboard heaters, resulting in high energy bills.

The objective was clear: to stabilize the temperature , improve comfort near the window and reduce annual energy consumption.


Solution choice: a Sharp TU wall-mounted heat pump

For this type of open, highly glazed space, a Sharp TU 18,000 BTU wall-mounted heat pump was the ideal solution:

  • 18,000 BTU capacity : sufficient to effectively treat the main room as well as part of the adjacent areas when the doors are open;

  • Inverter technology: the machine continuously modulates its power to maintain a stable temperature without fluctuations;

  • R-32 refrigerant: more efficient and more environmentally friendly than older refrigerants;

  • High-performance heating function to withstand the harsh winters of Montreal's South Shore;

  • Very low noise level, allowing you to enjoy the living room without disturbing noise, even in the evening.

The owners also wanted a device with a neutral look. The Sharp TU 's clean white design blends perfectly with the blue wall and the natural wood of the window frame.


Strategic positioning: above the bay window

As you can see in the photo, the Sharp wall unit was installed above the bay window , just below the ceiling. This choice is not only aesthetic, but also technical.

Advantages of this position

  1. Optimal air distribution
    The jet of cooled or heated air travels along the ceiling before gently descending towards the center of the room. This prevents the air from blowing directly on the occupants while ensuring even coverage.

  2. Treatment of sensitive areas
    The area around the bay window is usually the most problematic: strong heat gain in summer, cold walls in winter. By placing the Sharp heat pump there, we directly target the main source of discomfort.

  3. Preservation of natural light
    The installation does not block the flow of light in any way. The bay window remains fully functional, both in terms of opening and blinds.

  4. Visual integration
    The Sharp unit follows the ceiling line and aligns neatly with the wooden frame. The contrast between the white of the appliance and the blue of the wall creates a modern, uncluttered effect.

Technical installation details

Our AirGreen technicians have:

  • Checked the required clearances above, below and on the sides of the unit, to ensure good air circulation;

  • Routes the refrigeration lines and electrical cables to the side, behind a discreet cover perfectly fitted to the corner of the wall;

  • Careful management of the condensate drain is essential in air conditioning to avoid any accumulation of water or risk of damage;

  • Secure the indoor unit to a firmly anchored mounting plate to eliminate vibrations and ensure optimal longevity.


Outdoor unit and four-season performance

Outside, the Sharp TU wall-mounted heat pump is connected to a Sharp compressor installed in such a way as to meet all the constraints specific to homes in Brossard:

  • Anti-vibration mounts to limit the transmission of noise to the structure;

  • height cleared from the ground to minimize the impact of snow accumulation;

  • Positioning allowing free passage for servicing and good air circulation around the condenser;

  • Electrical connection compliant with the Code, with dedicated circuit breaker for the main panel.

Thanks to this complete configuration, the Sharp wall-mounted heat pump ensures:

  • Efficient and economical air conditioning during summer heat waves;

  • A reliable supplementary heater even at low temperatures, reducing the need for electric baseboard heaters;

  • Optimized energy consumption thanks to continuous power modulation.


Results: comfort, aesthetics and savings in Brossard

After commissioning, we carried out several functional tests and balanced the settings. Initial feedback from owners has been very positive:

  • More consistent temperature in the room, even near the bay window;

  • The feeling of stifling heat disappears in the summer thanks to the air conditioning mode and good air circulation;

  • Reduced use of electric heating in the fall and winter, which should be directly reflected in Hydro-Québec bills;

  • Appreciation of the device's silence , particularly when watching television or receiving guests.

Visually, the Sharp heat pump blends so seamlessly into the room that it appears to be part of the original décor. This is exactly the kind of result we strive for at AirGreen: installations that are efficient, durable, and aesthetically pleasing.


AirGreen: Your partner for Sharp heat pumps on the South Shore

Whether you are in Brossard , Saint-Lambert, La Prairie or elsewhere in Greater Montreal, our team specializes in:

  • Choosing the right model and capacity (Sharp TU, ZU1, ZHU1 and other Sharp wall series);

  • Optimizing the positioning of indoor units , particularly above windows, in rooms with standard or cathedral ceilings;

  • The careful installation of outdoor compressors , taking into account constraints of snow, wind, noise and access;

  • After-sales support , including maintenance and usage advice to extend the lifespan of your system.

If you are considering improving your comfort with a Sharp wall-mounted heat pump in your home in Brossard or on the South Shore, we would be happy to assess your project, offer you a suitable system and carry out an installation as clean and discreet as the one shown here.

The steps

How it goes, from the first call to the end

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 9The on-site estimate

We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

  1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
  2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
  3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
  4. The wall openingA single opening, with the slope the drain needs to flow outside.
  5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
  6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
  7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
  8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
  9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
Your numbers

And at your place?

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    And at your place?

    Which type of equipment for your project?

    Pick what looks like your need.

    Mistakes avoided

    Four mistakes we do not make

    Flip each card to see what we do instead.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.
    Going further

    Useful pages for what comes next

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    Tell us about your house. We come and see it for free.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment