Installation of a Sharp ZU1 Wall-Mounted Heat Pump in Baie-D'Urfé
Discover how the Sharp ZU1 15,000 BTU heat pump in Baie-D'Urfé provides top-notch heating down to -27°C, with quiet operation, eco-friendly refrigerant, and Wi-Fi control!
Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A Perfect Blend of Comfort and Efficiency
At AirGreen, we pride ourselves on providing top-tier HVAC solutions that cater to the unique needs of our customers. This latest installation in Baie-D'Urfé is no exception. The homeowner sought an efficient heating and cooling solution that would provide comfort all year round, even during Quebec’s extreme winters. The answer? The Sharp ZU1 15,000 BTU Wall-Mounted Heat Pump—a state-of-the-art unit designed to tackle the harshest of climates, ensuring a pleasant indoor environment regardless of the season.
Why the Sharp ZU1? The Story Behind the Installation
The client’s home in Baie-D'Urfé is situated in an area where winter temperatures regularly plunge below freezing. After a thorough consultation, we recommended the Sharp ZU1 for its outstanding heating capacity that performs down to -27°C, making it an ideal solution for Quebec winters. Not only does this unit offer superior heating performance, but it also excels in cooling during the humid summer months, providing a comprehensive solution for all-season comfort.
The Sharp ZU1, with its 15,000 BTU capacity, struck the perfect balance for this mid-sized home. It’s powerful enough to heat and cool efficiently without being oversized for the space, ensuring energy efficiency and long-term savings on utility bills.
But what really made the ZU1 stand out to this customer was its LogisVert Grant eligibility. Thanks to its energy efficiency, the homeowner qualified for a generous $2,172 grant from Hydro-Québec. This is part of a larger federal and provincial initiative to help Quebecers upgrade their homes to more eco-friendly technologies. The fact that the Sharp ZU1 also meets the stringent standards for an Energy Star® certification only added to its appeal.
Installation Day: Precision and Care in Baie-D'Urfé
Our professional team at AirGreen arrived early on a sunny morning, ready to carry out the installation with precision. The first step involved removing the old, inefficient heating system, which had been struggling to keep up with the homeowner’s needs during colder months.
The Sharp ZU1 indoor unit was installed in the living area—strategically placed to ensure optimal air distribution throughout the home. Measuring 41.42 inches in length, 9.80 inches in depth, and 12.44 inches in height, the sleek, modern design of the unit blended perfectly with the home’s interior decor. The homeowner was especially pleased with how quiet the indoor unit operates, boasting a sound pressure level of just 23 dB(A)—whisper quiet, even in operation.
Meanwhile, the exterior unit, with dimensions of 30.72 x 10.59 x 21.25 inches, was securely mounted outside. With a sound level of 49.0 dB(A), it ensures that even when working at full capacity, noise disturbance is kept to an absolute minimum. The outdoor unit is robust and built to withstand Quebec’s harsh winters, thanks to Sharp’s anticorrosive coating and advanced hot gas pipe system that keeps the unit frost-free even in sub-zero temperatures.
Advanced Features That Matter
The Sharp ZU1 isn’t just any ordinary heat pump; it’s packed with the latest in HVAC technology. One feature that sets it apart from other systems is its Plasmacluster® technology, which purifies the air by neutralizing airborne viruses, mold, allergens, and odors. This was a crucial factor for the homeowner, who was concerned about maintaining clean indoor air quality for their family.
- Superior Air Purification: Plasmacluster ions break down airborne contaminants and mold, transforming ions into water molecules that are naturally reintroduced into the environment, keeping your home fresh and healthy.
- Coanda Airflow Control: This technology directs airflow along the walls and ceilings, ensuring a uniform temperature throughout the home without the unpleasant sensation of cold air blowing directly on the inhabitants.
Additionally, the Wi-Fi connectivity feature allows the homeowner to control the system remotely, adjusting settings from their smartphone whether they're at home or away. The energy monitoring function also provides real-time feedback on energy consumption, helping the customer make informed decisions to save on electricity costs.
Built for Efficiency: Environmental Responsibility
At AirGreen, we are committed to offering products that are both high-performing and environmentally friendly. The Sharp ZU1 uses the R-32 refrigerant, which has a much lower global warming potential compared to older refrigerants. This not only makes it a greener choice but also improves the overall energy efficiency of the system by approximately 10%.
Furthermore, the ZU1 is built to handle multi-zone setups, making it perfect for homeowners who may want to add more units in the future. With its inverter technology, the heat pump adjusts its power usage according to the room’s needs, reducing energy consumption and prolonging the life of the unit. This, combined with the unit’s ability to self-clean and defrost efficiently, ensures that the homeowner can enjoy hassle-free operation for years to come.
Why Choose AirGreen for Your HVAC Needs?
This installation in Baie-D'Urfé is just one example of the high-quality HVAC solutions we provide at AirGreen. Our team is dedicated to ensuring that every installation is tailored to meet the specific needs of our customers. From the initial consultation to the final walkthrough, we ensure a seamless process that leaves homeowners satisfied and comfortable.
With grants available, energy savings, and modern features like Plasmacluster technology and Wi-Fi connectivity, the Sharp ZU1 15,000 BTU Heat Pump represents the future of home climate control. If you’re looking for an HVAC system that delivers unparalleled comfort, efficiency, and air quality, look no further than the experts at AirGreen.
The unit on this job, in figures
The range as published on airgreen.ca: pick a size to see its capacity in deep cold.
| Size | Heating at −8 °C | Heating at −15 °C | Coldest certified point | COP at −15 °C | SEER | HSPF | Indicative LogisVert aid |
|---|---|---|---|---|---|---|---|
| Sharp ZU1 12 000 | 14,500 | 12,000 | −27 °C: 7,200 | 2.11 | 22.0 | 11.0 | $1,740 |
| Sharp ZU1 15 000 | 18,100 | 15,300 | −27 °C: 10,100 | 2.1 | 24.0 | 11.0 | $2,172 |
| Sharp ZU1 18 000 | 22,000 | 18,000 | −27 °C: 11,500 | 2.2 | 24.0 | 11.0 | $2,640 |
| Sharp ZU1 24 000 | 22,400 | 19,000 | −27 °C: 12,300 | 2.2 | 22.0 | 11.0 | $2,688 |
According to NEEP, it delivers 14,500 BTU/h at −8 °C (17 °F), more than at 8 °C (14,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 7,200 BTU/h, 60% of its nominal 12,000 BTU size.
At 8 °C, its certified maximum capacity reaches 17,100 BTU/h, 42% more than its nominal 12,000 BTU size.
According to NEEP, it delivers 18,100 BTU/h at −8 °C (17 °F), more than at 8 °C (18,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 10,100 BTU/h, 67% of its nominal 15,000 BTU size.
At 8 °C, its certified maximum capacity reaches 21,800 BTU/h, 45% more than its nominal 15,000 BTU size.
According to NEEP, it delivers 22,000 BTU/h at −8 °C (17 °F), more than at 8 °C (21,600 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its COP at −27 °C is 1.88: the highest of the ZU1 line, which ranges from 1.79 to 1.82 at that temperature.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 11,500 BTU/h, 64% of its nominal 18,000 BTU size.
At −27 °C, its certified minimum capacity is 3,200 BTU/h (5,500 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 19,000 BTU/h, 79% of its nominal 24,000 BTU size. Its COP there is 2.20.
Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):
Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.
Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).