Installation of a Tosot Inverter wall-mounted heat pump in Rosemont
Installation of a Tosot Inverter wall-mounted heat pump in Rosemont, Montreal. AirGreen ensures performance, comfort, and optimal energy efficiency with expert HVAC service throughout Greater Montreal.

In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A high-performance and elegant HVAC solution for lasting comfort in the heart of Montreal
At AirGreen , we recently completed a Tosot Inverter wall-mounted heat pump installation in the Rosemont–La Petite-Patrie neighborhood, a typical urban area of Montreal where buildings combine old-world charm with modern energy efficiency needs. This project perfectly illustrates our expertise in residential HVAC installation , adapted to the architectural features of apartment buildings.
A demanding urban context: efficiency and discretion on the balcony
The client, the owner of a condo located on the upper floor of a Montreal plex, was looking for an economical , quiet and reliable solution to replace an old wall-mounted air conditioner. The main constraints were related to the limited space of the balcony and the need for a four-season system capable of providing optimal comfort in both heating and cooling.
The Tosot Inverter was a natural choice. This model, renowned for its high energy efficiency and variable speed compressor technology , allows precise adaptation to the thermal needs of the home while maintaining low energy consumption.
Choosing the Tosot Inverter wall-mounted heat pump
The Tosot brand, part of the GREE group, is an international benchmark in the field of heating and air conditioning . Its devices are designed to offer reliable performance even in the extreme temperatures of Quebec.
The Inverter model is distinguished by:
-
Quiet operation , ideal for urban environments like Rosemont;
-
Heating capacity down to -25°C , suitable for Montreal winters;
-
Inverter technology that adjusts compressor speed to maximize efficiency and minimize operating costs;
-
A compact and modern design , fitting perfectly into restricted environments, such as condo balconies.
Thanks to these features, the Tosot Inverter is eligible for several provincial grant programs , including those offered as part of Quebec's energy transition for high-efficiency equipment.
A neat installation adapted to the space
Our AirGreen certified technicians carried out an installation on a reinforced wall bracket , securely attached to the balcony structure. This configuration has several advantages:
-
It frees up floor space;
-
It ensures optimal clearance of the air flow around the condenser;
-
It facilitates maintenance and technical access in complete safety.
The outdoor unit was installed with a slight inclination to allow natural drainage of condensate, without the need for a pump. The refrigerant pipes were carefully insulated and protected by discreet, neutral-colored capping , in harmony with the facade.
The power supply has been integrated into a secure sheath that complies with CSA and RBQ standards.
The challenge: combining performance and aesthetics
One of the main challenges of this project was the visual discretion of the installation. The client's balcony overlooks a typical busy Rosemont street, and it was essential to maintain a clean appearance .
For that :
-
The cables and refrigeration lines were routed in a linear and compact manner;
-
The galvanized support was chosen for its resistance to corrosion and its neutral color;
-
The installation was carried out without any visible drilling on the facade side, complying with building standards and the expectations of the co-ownership association.
The result: a clean, silent and almost invisible installation , while guaranteeing optimal ventilation of the Tosot condenser .
Result: immediate comfort and lasting savings
From the moment it was switched on, the customer noted remarkable stability of the indoor temperature , without sudden variations or perceptible operating noise. Thanks to the Inverter compressor , the heat pump automatically adapts its power to actual needs, thus reducing:
-
electricity consumption ;
-
the startup noise ;
-
premature wear of mechanical components .
This system provides economical heating in winter and efficient cooling in summer, with a high seasonal efficiency (SEER) , comparable to the best brands on the market.
AirGreen expertise from Montreal
Each AirGreen project is based on a rigorous methodology:
-
Complete site assessment (structure, orientation, clearances, electrical constraints);
-
Selection of the ideal equipment according to the configuration of the accommodation;
-
Professional installation in accordance with the Canadian Electrical Code standards and manufacturer requirements;
-
System performance testing and calibration ;
-
Complete explanation to the customer on operation, maintenance and good usage practices.
Our goal: to offer every resident of Montreal, Laval, Longueuil, the North Shore or the South Shore a durable, aesthetic and efficient HVAC solution , perfectly adapted to their environment.
Maintenance and longevity: AirGreen advice
To ensure maximum performance from the Tosot Inverter , our experts recommend:
-
Regular cleaning of the internal filter (every two months during periods of intensive use);
-
An annual inspection by an AirGreen technician to check the refrigerant level, condition of connections and drainage;
-
A clearance of 30 to 40 cm around the condenser to ensure optimal air circulation;
-
Protection against snow in winter if the balcony is exposed.
These simple actions extend the life of the heat pump and maintain optimal energy efficiency throughout the year.
Why choose AirGreen for your HVAC project?
By choosing AirGreen , you benefit from:
-
From an experienced and RBQ certified team ;
-
Direct partnerships with the biggest brands (Tosot, Gree, Sharp, Midea, Fujitsu, etc.);
-
Complete support , from selection to commissioning;
-
Transparent and precise quotes , without hidden costs;
-
And a local, fast and efficient after-sales service , covering all of Greater Montreal.
Our achievements in Rosemont, Villeray, Chomedey and Brossard demonstrate our commitment to quality, durability and customer satisfaction.
Conclusion
This Tosot Inverter wall-mounted heat pump installation in Rosemont illustrates our ability to combine technical performance, elegant aesthetics and lasting comfort in a complex urban environment.
At AirGreen, each project is a new opportunity to optimize the well-being of our clients while reducing their energy footprint.
Our custom HVAC solutions guarantee maximum efficiency, no matter the season.
AirGreen – Your HVAC partner in Montreal, Laval, Longueuil, on the North Shore and the South Shore.
Contact us today for a free assessment and discover the AirGreen difference.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).
