Project

Installation of a Trane ProSpace PTAC in Ville-Marie

Installation of a Trane ProSpace PTAC in Ville-Marie by AirGreen. Compact and efficient HVAC solution for condos in Montreal, Laval, Longueuil, North Shore and South Shore.

By AirGreen Climatisation & Chauffage Admin3 min read
Installation of a Trane ProSpace PTAC in Ville-Marie
Installation of a Trane ProSpace PTAC in Ville-Marie
Generic diagram: PTAC installed under a window, through the wall

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. All-in-one: it heats and cools from inside the room, with no separate outdoor unit.

  2. A box that goes through the wall and holds the unit. It is installed following the manufacturer's instructions so water drains to the outside.

  3. This is where the unit exchanges heat with the outdoor air. It must stay clear.

  4. A dedicated connection matched to the unit's voltage and amperage.

  5. On the unit or through a wall thermostat, depending on the model.

  6. Under a window, the unit must leave curtains, sill and opening free, and let air move through the room.

An HVAC installation project adapted to condo living in downtown Montreal

In the Ville-Marie borough, in the heart of downtown Montreal, our AirGreen teams recently completed the installation of a Trane ProSpace PTAC unit . This type of system, widely used in modern hotels and condos, combines heating and air conditioning in a compact, through-the-wall format, making it particularly suitable for high-density urban environments where space is limited.

This example perfectly illustrates our expertise in residential HVAC installation in demanding technical contexts.


Choosing a PTAC system: simplicity and efficiency in a limited space

PTAC (Packaged Terminal Air Conditioner) units are distinguished by their all-in-one design. The unit combines the compressor, evaporator, and fan into a single console, installed directly at the bottom of the wall. In this project:

  • Brand: Trane , renowned for its robustness and reliability.

  • Model: ProSpace , designed specifically for condos, urban residences and small commercial buildings.

  • Type: PTAC , through the wall, allowing the unit to reject heat directly outside.

The main advantage for condo owners in Montreal is the absence of a bulky outdoor condenser, which simplifies space constraints on balconies and flat roofs.


Installation challenges encountered in this Ville-Marie condo

Installing a Trane ProSpace PTAC unit in a downtown condo presented some challenges that we had to overcome:

Adaptation to existing buildings

The load-bearing walls of the residential towers require particular precision when cutting and integrating the unit. Our team took care to work with existing materials without compromising the building's thermal insulation.

Condensate management

In this project, we favored gravity drainage directly connected to the building's technical column, thus avoiding the addition of a condensate pump which would have required additional maintenance.

Aesthetics and integration

The unit, located just below the window, blends discreetly into the apartment's decor. Carefully finished moldings and flooring ensure a clean and harmonious installation without compromising the condo's aesthetic.


Benefits for the customer

Installing this Trane ProSpace PTAC offers the owner several immediate benefits:

  • 4-season comfort : heating in winter, air conditioning in summer, ventilation in mid-season.

  • Ease of use : integrated thermostat and remote control available.

  • Energy Efficiency : Trane's modern PTAC units are designed to meet today's efficiency standards.

  • Reliability : Trane is recognized for the durability of its components, reducing maintenance requirements.

  • Space saving : no bulky outdoor unit on the balcony or roof.


AirGreen: your HVAC partner in downtown Montreal

At AirGreen, we have proven expertise in installing HVAC systems tailored to condos, apartments, and high-rise buildings in Greater Montreal. Our team understands the unique challenges of high-rise buildings: managing openings, co-ownership standards, aesthetic integration, and compliance with municipal regulations.

Whether you are located in Ville-Marie, Laval, Longueuil, on the North Shore or the South Shore , we offer turnkey solutions to improve the comfort of your home with reliable and efficient devices like Trane ProSpace PTAC units .


Conclusion

The installation carried out in this Ville-Marie condo demonstrates the importance of choosing a specialized partner like AirGreen for your HVAC projects. We know how to adapt each solution to your residential reality, while ensuring optimal comfort and lasting efficiency.

AirGreen, your HVAC installation expert in Montreal and its surrounding areas.

The steps

How it goes, from the first call to the end

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 7The on-site estimate

We look at the outside wall, the window, the space in the room and the power supply.

  1. The on-site estimateWe look at the outside wall, the window, the space in the room and the power supply.
  2. The quoteThe unit, the sleeve and the price, in writing.
  3. The wall sleeveInstalled following the manufacturer's instructions, so water drains to the outside.
  4. The electrical workA dedicated connection matched to the unit's voltage and amperage.
  5. Unit and grilleThe unit slides into the sleeve; the outdoor grille stays clear.
  6. TestsStart-up and a check of heating and cooling.
  7. The walkthroughControls, filter, what to keep clear.
Through the seasons

What to do, season by season

Three habits per season for this unit. They take a few minutes and prevent many calls.

  • Clean the filter.
  • Clear the outdoor grille.
  • Test cooling.
And at your place?

Which type of equipment for your project?

Pick what looks like your need.

Mistakes avoided

Four mistakes we do not make

Flip each card to see what we do instead.

Frequently asked questions

What people ask us about this kind of work

7 questions
What is a PTAC?
An all-in-one unit installed under the window, through the wall. It heats and cools the room with no separate outdoor unit.
Where does it go?
On an outside wall that can take the sleeve, with the grille clear outside and free air in front of the unit.
What does it need electrically?
A dedicated connection matched to the unit's voltage and amperage. AirGreen holds subclass 16 Electricity.
Can the existing sleeve be reused?
Sometimes, if the sleeve fits the new unit and is in good shape. We check on site.
Does a PTAC cool the whole house?
No, it is designed for one room. For several rooms, a multi-zone or a central system is often a better fit.
Does AirGreen hold the required licences?
Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
Is the estimate free?
Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.
Going further

Useful pages for what comes next

Could this job help a neighbour?

Share
Similar projects

More jobs to see, near you

By town, by equipment or by region: browse more than 4,700 published projects.

Each dot: a town where AirGreen has published projects. The glowing dot: this job.

All our projects

Your project

Tell us about your house. We come and see it for free.

The on-site estimate is free and the quote follows within 24 hours.

  • RBQ licence5645-9605-01 · 15.8, 15.10, 16
  • EstimateOn site, free
  • QuoteWithin 24 hours

Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

Leave a comment