Installation of a Zephyr (residential range) wall-mounted heat pump in Chomedey (Laval)
AirGreen installs a Zephyr wall-mounted heat pump in Laval – Chomedey : raised anti-vibration support, watertight drilling, optimized connections, rigorous commissioning. Greater Montreal service: Montreal, Laval, Longueuil, North Shore and South Shore.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Four-season comfort for a condo in Chomedey: our AirGreen method, from technical inspection to commissioning
Client context and objectives
At AirGreen , we were commissioned by a co-owner in Chomedey (Laval) who wanted a compact, quiet, and reliable HVAC system to cool in the summer and heat in the off-season. The home is a condo with a concrete balcony overlooking a green courtyard. The choice fell on a Zephyr wall-mounted heat pump (residential range), sized to ensure the comfort of an open main living space. The challenge: a clean, durable, and compliant installation , with a neat aesthetic on the facade side and a minimal noise level to preserve the tranquility of the neighborhood.
What we install and why
The chosen solution
-
Machine type: wall-mounted heat pump (mini-split) , ideal for co-ownerships due to its compactness and efficiency.
-
Brand: Zephyr , renowned for its good performance/price ratio, its discreet outdoor units and ease of maintenance.
-
Target capacity: typical rating ≈ 12,000 BTU for a standard-sized condo (after calculating thermal load based on orientation, glass surfaces and insulation).
-
Performance objectives: consistent comfort, low consumption , and quiet operation .
Benefits for everyday life
-
Heating and air conditioning with a single machine.
-
Inverter modulation (variable speed) to maintain a stable temperature and limit electrical peaks.
-
Simplified HVAC maintenance (regular cleaning of indoor filters, annual inspection of the outdoor unit).
Visible installation details and AirGreen best practices
Installation of the outdoor unit
We place the Zephyr unit on a raised aluminum support fixed to the concrete balcony.
Concrete benefits:
-
Water and snow protection : ground clearance that prevents the accumulation of moisture and debris.
-
Vibration reduction : anti-vibration pads under the anchor points to preserve the structure and acoustic comfort.
-
Clearances respected : the unit breathes, ensuring optimal air flow on the suction and blowing sides.
Why not wall brackets? In this context, the balcony provides a rigid and flat base , limits vibration transmission to the adjacent brick wall, and facilitates maintenance (defrosting, washing the condenser).
Drilling, connection paths and sealing
-
Core drilling through the wall adjacent to the balcony to route the refrigeration lines , the communication cable and the condensate drain .
-
Pipe bending radius respected, continuous insulation and butyl tape at the crossings to prevent air and moisture infiltration.
-
Exterior polyurethane sealant with collar for a durable and clean finish.
-
Typical connection length : 3 to 5 m between the interior wall head and the condenser, ideal for limiting pressure losses and simplifying maintenance.
Condensate management
In this condo, we favor gravity drainage (continuous slope and discreet outlet). When the slope is not possible, we install a silent condensate pump with integrated tray and anti-siphonage , but here, the configuration allows a solution without additional electromechanical components — a guarantee of simplicity and reliability.
Power supply and compliance
-
Dedicated circuit from the panel: circuit breaker suitable for the machine nameplate.
-
External disconnect box near the condenser for safe interventions.
-
Grounding and RBQ/Code compliance . At AirGreen, we systematically document the installation (photos, serial numbers) and provide the customer with a commissioning file .
Commissioning: rigor and traceability
Quality procedures
-
Nitrogen test to validate the tightness of the connections.
-
Deep vacuum at the micron level to ensure a dry and clean circuit.
-
Opening of the valves , balancing of the fluid and recording of the parameters : suction and discharge temperatures, intensity, pressures, delta T on the interior side.
-
Acoustic check : operation at different speeds to ensure contained noise on the balcony and inside.
-
User training : heating/cooling modes, fin adjustment, filter maintenance, energy optimization advice.
Result: measurable comfort and careful finishing
What the customer notices immediately
-
Rapid temperature reduction in air conditioning mode and gentle heat in auxiliary heating mode.
-
Perceived silence on the balcony thanks to the anti-vibration support and optimized positioning .
-
Discreet aesthetics : clean wiring and drilling, no runoff on the facade.
What the installation guarantees over time
-
Stable performance thanks to the respected air release.
-
Easy maintenance : easy access to the condenser, cleaning of the external battery without complex disassembly.
-
Longevity of refrigeration connections and protected insulation.
HVAC Operation and Maintenance Tips (Montreal and Laval)
To get the most out of your wall-mounted heat pump
-
Maintain a moderate and constant setting ; avoid thermostat yo-yoing.
-
Clean the interior filters every 4 to 6 weeks during peak season.
-
Clear the outdoor unit in winter (ice, leaves, dust) to preserve air flow .
-
Schedule annual HVAC maintenance : electrical inspection, cleaning of exchangers, checking of condensates, checking of parameters.
Grants and Eligibility
Depending on the configuration and efficiency certification of the chosen model, Quebec programs (e.g., when the equipment is Energy Star certified and designed for cold climates) may offer incentives. We validate eligibility for you and prepare the file . Our teams also support residents of Montreal , Laval , Longueuil , as well as on the North Shore and the South Shore .
Pitfalls to avoid (AirGreen feedback)
-
Undersize or oversize the machine: an incorrect size is detrimental to comfort and consumption. We systematically carry out a load calculation .
-
Neglecting clearances around the condenser: lack of air reduces efficiency and accelerates frost in winter.
-
Poorly sealed openings : sources of infiltration, mold and energy losses.
-
Lack of suitable support : installation flush with the ground or without anti-vibration devices increases noise and wear.
Why choose AirGreen in Laval and Greater Montreal?
We combine field engineering , quality workmanship and after-sales follow-up . Our certified installers respond quickly in Laval , Montreal , Longueuil , on the North Shore and the South Shore , with a clear approach: diagnosis , impeccable HVAC installation , documented commissioning , then scheduled HVAC maintenance . The result: a high-performance, durable and pleasant Zephyr wall-mounted heat pump for everyday use.
Quick project sheet (Chomedey)
-
Building: condo with concrete balcony (brick facade).
-
System: Zephyr wall-mounted heat pump , capacity ~12,000 BTU (depending on load).
-
Exterior installation: raised aluminum support with anti-vibration pads , mechanical anchors.
-
Route: clean drilling, 3–5 m connections , PU caulking + collar.
-
Condensates: gravity drainage .
-
Power supply: dedicated circuit + external disconnection .
-
Tests: nitrogen, deep vacuum , commissioning readings.
Are you considering an HVAC installation in Laval (Chomedey, Sainte-Dorothée, Vimont) or elsewhere in Greater Montreal ? We size, install, and maintain your wall-mounted heat pump for lasting comfort, summer and winter.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).