Installation of a Sharp ZU1 Mini-Split Air Conditioner in Brossard, South Shore
Discover how Brossard homes are turning greener and more comfortable with the Sharp ZU1 Mini Split—advanced purification, unmatched efficiency, and silent operation!
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The unit’s data sheet
The range as published on airgreen.ca: pick a size to see its capacity in deep cold.
| Size | Heating at −8 °C | Heating at −15 °C | Coldest certified point | COP at −15 °C | SEER | HSPF | Indicative LogisVert aid |
|---|---|---|---|---|---|---|---|
| Sharp ZU1 12 000 | 14,500 | 12,000 | −27 °C: 7,200 | 2.11 | 22.0 | 11.0 | $1,740 |
| Sharp ZU1 15 000 | 18,100 | 15,300 | −27 °C: 10,100 | 2.1 | 24.0 | 11.0 | $2,172 |
| Sharp ZU1 18 000 | 22,000 | 18,000 | −27 °C: 11,500 | 2.2 | 24.0 | 11.0 | $2,640 |
| Sharp ZU1 24 000 | 22,400 | 19,000 | −27 °C: 12,300 | 2.2 | 22.0 | 11.0 | $2,688 |
According to NEEP, it delivers 14,500 BTU/h at −8 °C (17 °F), more than at 8 °C (14,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 7,200 BTU/h, 60% of its nominal 12,000 BTU size.
At 8 °C, its certified maximum capacity reaches 17,100 BTU/h, 42% more than its nominal 12,000 BTU size.
According to NEEP, it delivers 18,100 BTU/h at −8 °C (17 °F), more than at 8 °C (18,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 10,100 BTU/h, 67% of its nominal 15,000 BTU size.
At 8 °C, its certified maximum capacity reaches 21,800 BTU/h, 45% more than its nominal 15,000 BTU size.
According to NEEP, it delivers 22,000 BTU/h at −8 °C (17 °F), more than at 8 °C (21,600 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its COP at −27 °C is 1.88: the highest of the ZU1 line, which ranges from 1.79 to 1.82 at that temperature.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 11,500 BTU/h, 64% of its nominal 18,000 BTU size.
At −27 °C, its certified minimum capacity is 3,200 BTU/h (5,500 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 19,000 BTU/h, 79% of its nominal 24,000 BTU size. Its COP there is 2.20.
Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.
The article, chapter by chapter
Bringing Comfort and Efficiency to South Shore Residences
In the charming community of Brossard, located on Montreal's bustling South Shore, a remarkable transformation is taking place, one home at a time. AirGreen is at the forefront of this change, ensuring homes are not only comfortable but also energy efficient. Our recent installation of a Sharp ZU1 Mini-Split Air Conditioner system exemplifies our commitment to delivering top-notch HVAC solutions that meet both the climatic needs and the environmental goals of our community.
A Blend of Performance and Eco-Friendliness
Cutting-Edge Technology for Your Home
The Sharp ZU1 15,000 BTU unit is a testament to the technological advancements in climate control. Designed for both heating and cooling, this system operates efficiently even at the daunting low of -27°C, ensuring your home remains a sanctuary regardless of the weather outside. Here’s what makes the Sharp ZU1 not just another air conditioner but a pivotal part of your home:
-
Plasmacluster Technology: This unique feature sets the Sharp ZU1 apart by purifying indoor air to an exceptional degree. It eliminates airborne viruses, mold, and even stubborn odors, enhancing your living environment without the noise and fuss typical of other purification methods.
-
Coanda Airflow Control: With the innovative Coanda Effect, this unit distributes air evenly throughout the room, avoiding the discomfort of direct air blow. It’s all about enhancing comfort uniformly, without creating zones of differing temperatures.
-
Energy Efficiency: With a SEER rating of 24.0, the Sharp ZU1 is one of the most efficient models on the market. It reduces energy consumption while keeping your home comfortable, aligning with both provincial and federal energy-saving grants, making it a smart choice for the eco-conscious homeowner.
A Green Investment
Sustainable Choices for Modern Living
Opting for the Sharp ZU1 Mini Split is not just a decision to upgrade your home's HVAC system; it's a choice for sustainability. The unit features the latest in eco-friendly refrigerants, R-32, which boasts a significantly lower global warming potential than its predecessors. Here’s how this installation is an investment in both your home and the planet:
-
Reduced Carbon Footprint: The R-32 refrigerant is designed to decrease greenhouse gas emissions, thus playing a crucial role in combating climate change at the household level.
-
Energy Star Certified: Meeting rigorous energy efficiency standards, this unit not only cuts down on utility bills but also qualifies for substantial rebates under both federal and provincial programs, amounting to savings of over $4,672.
Installation Journey: A Story of Precision and Care
Expertise in Every Step
The installation process in a cozy Brossard home was as meticulous as the technology itself. Our team, armed with expertise and the right tools, ensured that the installation was smooth and the system calibrated to perform at its peak. From choosing the perfect location that avoids direct sunlight on the unit to ensuring the ductwork is sealed properly, no detail was too small. Here’s a glimpse into our installation ethos:
-
Precision Placement: The outdoor unit was positioned to ensure optimal performance and minimal noise, preserving both the aesthetic and tranquility of the homeowner's garden.
-
Seamless Integration: Inside, the unit blends with the decor, its sleek design complementing modern interior aesthetics while delivering exceptional comfort.
-
Tailored to Your Home: Each installation is unique. We take the time to understand your specific needs, ensuring that the Sharp ZU1 not only meets but exceeds your heating and cooling expectations.
Why Choose AirGreen?
Your Partner in Home Comfort
Choosing AirGreen means partnering with a leader in HVAC solutions that are tailor-made for the harsh Quebec winters and variable summers. Our commitment to quality and customer satisfaction ensures that each installation is not just about fitting a unit but about enhancing the comfort and quality of your living space.
-
Dedicated Support: Our team is always ready to assist, from the initial consultation to post-installation support.
-
Quality Assurance: With a decade-long warranty on parts, labor, and the compressor, your investment is secure.
-
Local Expertise: As locals, we understand Quebec's climate intricacies, making us uniquely equipped to recommend and install the best HVAC solutions.
At AirGreen, we believe that your home’s comfort system should be as reliable and efficient as it is invisible. The Sharp ZU1 Mini Split installation in Brossard is just one example of how we’re cooling and heating homes across the South Shore, one satisfied homeowner at a time.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):
Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.
Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).