Installation of a New Air Exchanger in Brossard, South Shore
Transform your home with AirGreen's state-of-the-art LifeBreath air exchangers – where efficiency meets customer satisfaction in Brossard!
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
It removes stale air and brings in fresh air. The two airflows cross in the core without mixing.
It recovers part of the heat from the outgoing air to temper the incoming air. Depending on the model, it also manages humidity.
An outdoor hood, kept away from the exhaust so the house does not pull back the air it just removed.
Humid, stale air leaves through its own hood, fitted with a damper.
The ducts that connect to the outside are insulated to prevent condensation inside the house.
Stale air is drawn from humid rooms and fresh air is sent to living areas. The airflows are balanced.
It sets the mode and speed. You use it more when the house is humid or full of people.
Depending on the model and the season, the core produces condensation, removed through a drain with its loop.
A Breath of Fresh Air for Your Home
The Challenge: Replacing the Old with the New
In the quiet, tree-lined streets of Brossard on the South Shore, a remarkable transformation took place in a local residence. This wasn't just any routine upgrade—it was a pivotal home improvement for a homeowner dealing with a 15-year-old air exchanger that had finally given up. Faced with the choice between costly repairs and a modern replacement, the decision leaned towards innovation and efficiency.
Choosing AirGreen: Why We Were the Perfect Fit
AirGreen stands out in the bustling HVAC industry of Montréal, Laval, Longueuil, and beyond. We're not just service providers; we're your neighbors, deeply embedded in the local community and committed to enhancing your living environment. Here’s why the homeowner chose us:
- Local Expertise: Knowing the ins and outs of South Shore homes gives us an edge in providing tailored advice and solutions.
- Custom Solutions: We leverage existing setups to keep costs down and disruption minimal.
- Customer-Centric Discounts: Our approach to business is straightforward—what’s best for you is what’s best for us.
The Installation Day: Seamless and Swift
The day of the installation was marked by crisp efficiency. Here’s a play-by-play of how we transformed an HVAC headache into a breath of fresh air:
- Initial Assessment: Our team arrived on site and conducted a thorough review of the existing setup. This ensured that the new unit would integrate seamlessly.
- Removal of the Old Unit: With precision and care, the old air exchanger was removed, making way for innovation.
- Installation of the LifeBreath Air Exchanger: The star of the show was the LifeBreath air exchanger, known for its robust performance and energy efficiency. It was chosen specifically for its ability to exceed the capabilities of the old unit.
- Final Checks and Customer Walkthrough: No job is complete without a detailed review and customer approval. We walked through the installation with the homeowner, ensuring satisfaction.
The LifeBreath Air Exchanger: A Closer Look
Why is the LifeBreath air exchanger a homeowner's dream? Here’s the scoop:
- Enhanced Efficiency: Reduces energy costs while improving air quality.
- Powerful Performance: Designed to handle the demands of any household, large or small.
- Longevity and Reliability: Built to last, ensuring years of trouble-free operation.
Another Very Satisfied Customer
Our customer's reaction was nothing short of thrilled. Not only did the new system fit perfectly into the existing setup, but it also offered superior efficiency and power. The joy of breathing clean, fresh air in their home was a transformative experience.
Why Choose AirGreen for Your Next HVAC Project?
- Expert Advice: Our team is equipped with the knowledge to guide you through every step of your HVAC needs.
- Tailored Solutions: We don’t believe in one-size-fits-all. Every home is unique, and so are our solutions.
- Commitment to Satisfaction: We’re not happy until you are. Ensuring your comfort is our top priority.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We locate the wall for the two outdoor hoods, the unit's spot, service access and the drain.
The unit, its location and the price, in writing.
Hung or set level, with clear access to the filters and the core.
Fresh air intake and exhaust, kept apart and sealed.
The ones connected to the outside are insulated to prevent condensation inside the house.
Connected with its loop, when the unit needs one.
Installed where you will see it and use it.
Incoming and outgoing airflows are adjusted so the house is neither pressurized nor depressurized.
Speeds, filters, core: how to use it through the seasons.
- The on-site estimateWe locate the wall for the two outdoor hoods, the unit's spot, service access and the drain.
- The quoteThe unit, its location and the price, in writing.
- The unitHung or set level, with clear access to the filters and the core.
- The outdoor hoodsFresh air intake and exhaust, kept apart and sealed.
- The ductsThe ones connected to the outside are insulated to prevent condensation inside the house.
- The drainConnected with its loop, when the unit needs one.
- The wall controlInstalled where you will see it and use it.
- BalancingIncoming and outgoing airflows are adjusted so the house is neither pressurized nor depressurized.
- The walkthroughSpeeds, filters, core: how to use it through the seasons.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the filters and core as the manufacturer specifies.
- Check the outdoor hoods: nests, debris, dampers.
- Lower the speed if the outdoor air gets humid.
- Adjust the speed to the humidity in the house.
- Check that the drain flows.
- Keep the outdoor hoods clear.
- Clean the filters before the closed-house season.
- Check the exhaust damper.
- Book a full cleaning if the unit has not had one in a long time.
- Clear snow from both outdoor hoods.
- Raise the speed if condensation appears on windows.
- Let the unit run: with the house closed, humidity builds up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
What does an air exchanger do?
Does fresh air cool the house in winter?
What speed should it run at?
Does an exchanger need cleaning?
What are the signs of poor ventilation?
HRV or ERV: what is the difference?
Should it run in winter?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).