Installation of a Gree Flexx Electric Furnace in Laval
Find out how our Laval client transformed their home comfort with the Gree Flexx furnace—12 years warranty, superior efficiency, and a service that left them recommending us!
Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.
The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.
A shut-off switch near the outdoor unit isolates it safely for service.
Sitting on the indoor module, it moves heat between the house air and the refrigerant.
Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.
Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.
It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.
It runs the heat pump and the backup heat. It must be compatible with the installed system.
Elevating Home Comfort with Advanced HVAC Solutions
A Seamless Upgrade in Laval: Introducing the Gree Flexx Electric Furnace
When it comes to home comfort, reliability and efficiency are key. At AirGreen, we understand the importance of both, and our latest installation in Laval is a testament to this commitment. Our customer's journey from an outdated heating system to a cutting-edge Gree Flexx Electric Furnace showcases not just an upgrade in technology but a leap towards sustainability and long-term satisfaction.
Why the Gree Flexx Was the Perfect Fit
Our client in Laval faced recurring issues with their old furnace, which required frequent and costly repairs. With the desire to leverage the latest Hydro-Québec grants, they approached us to find a solution that would not only enhance their home's heating efficiency but also ensure robust support for years to come. Here's why the Gree Flexx stood out:
- Incredible Warranty: Offering a 12-year warranty on parts and the compressor, this model promises peace of mind like no other.
- Energy Efficiency: With up to 20 SEER and 10.5 HSPF, the Gree Flexx maximizes energy usage while minimizing costs.
- Adaptability: The system adjusts seamlessly between 2 and 3 tons, making it versatile for varying home sizes and needs.
- Advanced Features: From Eco Mode and powerful operation to automatic restarts after power failures, this furnace is equipped with functionalities that bring convenience and comfort right to your doorstep.
The Installation Process: Detail-Oriented and Professional
Our approach to the installation in Laval was thorough and meticulous, ensuring that every component functioned perfectly:
- Old System Evaluation: We started by evaluating the existing setup, ensuring the new unit could integrate smoothly.
- Reusing Existing Infrastructure: To minimize disruption and cost, we reused the old pipes and electrical wiring, which were still in excellent condition.
- Precise Location Changes: Although the furnace remained in the same location, adjustments were made to the heat pump's placement, improving the system's overall efficacy and aesthetic.
- Quality Checks: We conducted extensive tests on the old pipes for leaks and cleaned them thoroughly to prevent any future issues.
Customer Satisfaction and Beyond
The results spoke for themselves. Not only was the installation executed flawlessly, but our customer was also immensely satisfied with the outcome. Their feedback highlighted several benefits:
- Enhanced Performance: The new system provided immediate improvements in heating efficiency and home comfort.
- Financial Savings: The utilization of the Hydro-Québec grant, coupled with reduced energy bills due to the furnace's high efficiency, resulted in significant savings.
- Peace of Mind: With the best warranty available and the assurance of a top-quality product, the customer felt secure in their investment.
- Referrals and Recommendations: Satisfied with our service, the customer has since recommended AirGreen to friends and family, expanding our community of happy clients.
Why Choose AirGreen for Your HVAC Needs?
Choosing the right HVAC service provider is crucial. At AirGreen, we not only promise top-tier technology like the Gree Flexx but also guarantee a service experience that prioritizes your needs and satisfaction. Our team of certified professionals is dedicated to providing you with not just a product but a long-term solution to your heating and cooling challenges. With AirGreen, you choose comfort, efficiency, and reliability.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
The equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
Access protected, old unit disconnected and removed when it is being replaced.
Electric furnace or air handler, with its coil, connected to the supply and return ducts.
On a level base, raised above the snow, with free space all around.
Insulated, they enter through a sealed opening and run to the indoor coil.
Dedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
Leak test, vacuum, start-up, airflow check and a test of both modes.
Filter, thermostat, backup heat in extreme cold: what to know before winter.
- The on-site estimateWe look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
- The quoteThe equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
- Getting readyAccess protected, old unit disconnected and removed when it is being replaced.
- The indoor moduleElectric furnace or air handler, with its coil, connected to the supply and return ducts.
- The outdoor unitOn a level base, raised above the snow, with free space all around.
- The refrigerant linesInsulated, they enter through a sealed opening and run to the indoor coil.
- Electrical and thermostatDedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
- Tests and start-upLeak test, vacuum, start-up, airflow check and a test of both modes.
- The walkthroughFilter, thermostat, backup heat in extreme cold: what to know before winter.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Check the indoor module's filter.
- Clear winter debris from the outdoor unit.
- Test cooling before the heat arrives.
- Check the filter more often in peak season.
- Keep registers and returns clear.
- Watch condensate drainage near the coil.
- Change or clean the filter.
- Test heating and backup heat before the cold.
- Book periodic maintenance.
- Clear snow around the outdoor unit.
- Store nothing in front of the indoor module.
- Note any unusual noise or smell and call us.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. A central heat pump uses the house's ducts.
It connects to the existing ducts to heat and cool everywhere.
2. In extreme cold, electric backup heat can take over.
The indoor module (furnace or air handler) works with the heat pump and takes over in extreme cold.
3. The filter only gets changed when the unit breaks down.
A dirty filter cuts airflow. It gets checked regularly.
4. You can reuse the old unit's size without checking.
The house may have changed: insulation, windows, added rooms. Capacity is confirmed on site.
0 / 4 right answers
What people ask us about this kind of work
Can I keep my current ducts?
What happens in extreme cold?
Furnace, air handler, ducted: what is the difference?
Are there grants?
Do I need a permit?
How much can I save?
How is the LogisVert assistance calculated?
Will my current thermostat work?
Central or wall units: which one?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).